21 posts in this topic

TrinityCore rev. 1af6df41a5e3 2017-10-02 15:42:58 +0200 (3.3.5 branch) (Win64, Release, Static) (worldserver-daemon)
<Ctrl-C> to stop.

 ______                       __
/\__  _\       __          __/\ \__
\/_/\ \/ _ __ /\_\    ___ /\_\ \, _\  __  __
   \ \ \/\`'__\/\ \ /' _ `\/\ \ \ \/ /\ \/\ \
    \ \ \ \ \/ \ \ \/\ \/\ \ \ \ \ \_\ \ \_\ \
     \ \_\ \_\  \ \_\ \_\ \_\ \_\ \__\\/`____ \
      \/_/\/_/   \/_/\/_/\/_/\/_/\/__/ `/___/> \
                                 C O R E  /\___/
http://TrinityCore.org                    \/__/

Using configuration file C:/TrinityCore/Source/bin/Release/worldserver.conf.
Using SSL version: OpenSSL 1.0.2l  25 May 2017 (library: OpenSSL 1.0.2l  25 May 2017)
Using Boost version: 1.63.0
Updating Auth database...
>> Auth database is up-to-date! Containing 8 new and 19 archived updates.
Updating Character database...
>> Character database is up-to-date! Containing 1 new and 22 archived updates.
Updating World database...
>> World database is up-to-date! Containing 347 new and 2303 archived updates.
Realm running as realm ID 1
Using World DB: TDB 335.63
Will clear `logs` table of entries older than 1209600 seconds every 10 minutes.
Client cache version set to: 63
Using DataDir ./
WORLD: MMap data directory is: ./mmaps
VMap support included. LineOfSight: 1, getHeight: 1, indoorCheck: 1
VMap data directory is: ./vmaps
VMap file './vmaps/000.vmtree' does not exist
Please place VMAP files (*.vmtree and *.vmtile) in the vmap directory (./vmaps/), or correct the DataDir setting in your worldserver.conf file.
Unable to load critical files - server shutting down !!!
 

Hello before I start this thread I would like to tell you that my english is not that good and I've been looking everywhere on forums for help. As u can see I have the file "/vmaps/000.vmtree", but still I get error trying 2 launch wowserver.exe

2.png

1.png

0

Share this post


Link to post
Share on other sites

If it gets deleted, it's probably because you are not using the official extractors for that version. The "VMap file './vmaps/000.vmtree' does not exist" also means it can't read the file, due to unsupported version.

You have to extract them fresh from what you compiled. Do NOT download and use unsupported mmaps, dbcs, or vmaps from another source.

https://trinitycore.atlassian.net/wiki/spaces/tc/pages/2130046/Server+Setup#ServerSetup-Extractors

1

Share this post


Link to post
Share on other sites

hmmm, I am sure that I havent used any unsupported versions. Could it be the order that I am extracting to?

I start of copy -> paste
mapexstractor
nmaps_generator
vmap4asssembler
vmap4extractor to C:\Users\Christopher\Desktop\Wrath of the Lich King 3.3.5a (wod models)
Then I start of launching mapexstractor 
Then I have (DBC, Cameras and maps)
and then what? 

0

Share this post


Link to post
Share on other sites

There is no support to modify client, wod models change some dbc files, that probably is the cause of your error. Try to extract from original client 3.3.5 without any modifications. Also with that modification you get a lot of exception from your client when you try to reach an area that its not complete in your dbc.

0

Share this post


Link to post
Share on other sites

Hello HannibalRoG!
I don't think it's the wod model who is causing the problem. But I will try with Dalaran-WoW's client instead!
Yesteday I made a discovery. I gave up since Vmaps couldnt work correctly, so I downloaded Jeutie's Repack instead. btw, I had no problem earlier this weak installing and setup Jeuties Repack but when I tried 2 run Worldserver it gave me the exact same error as my first post on this thread did. Even tho that I downloaded JEuties: (DBC, Vmaps, Mmaps, etc). So this night I've been resetting my whole computer, and I am trying again now to compile the server. :)

-1

Share this post


Link to post
Share on other sites

@Chrisseria2520 As long as you do not use the original client without any modification and the tools that are compiled with the core you will still have problems extracting the datas and running the server

 

BTW who is dedicated to giving bad reputation in the post where it is trying to help people?
Poor unfortunate
.

1

Share this post


Link to post
Share on other sites

Hello @HannibalRoG.  I havent been giving u bad reputation. I do really appreciate that you're at least trying to help me! But I got one I see. 
Well Hannibal you're talking about the "original Client", where can I be sure that I find the "original client" without any mods involved? 

0

Share this post


Link to post
Share on other sites
On 10/4/2017 at 11:55 AM, HannibalRoG said:

@Chrisseria2520 As long as you do not use the original client without any modification and the tools that are compiled with the core you will still have problems extracting the datas and running the server

 

BTW who is dedicated to giving bad reputation in the post where it is trying to help people?
Poor unfortunate
.

I gave you credit :), I don't normally touch credit thingy, however, extracting from a corrupt or broken client is actually pretty common.

Good catch!

1

Share this post


Link to post
Share on other sites

@HannibalRoG and @CDawg, well have u guys ever been compiling ur own Trinitycore? I mean what version of different programs do u use? I just want 2 make sure, that I am not using some kind of wrong version or something?

1

Share this post


Link to post
Share on other sites

If you follow all steep here https://www.trinitycore.info/ you must be able to run the server without major problems, assuming you have an unmodified client and using the tools compiled with the server. Just follow the instructions and you will not have problems.

2

Share this post


Link to post
Share on other sites
On 4/10/2017 at 8:55 PM, HannibalRoG said:

BTW who is dedicated to giving bad reputation in the post where it is trying to help people?
Poor unfortunate
.

I thougth the same, so weird. +credit for helping people ;)

1

Share this post


Link to post
Share on other sites
20 hours ago, Chrisseria2520 said:

@HannibalRoG and @CDawg, well have u guys ever been compiling ur own Trinitycore? I mean what version of different programs do u use? I just want 2 make sure, that I am not using some kind of wrong version or something?

I use Linux, and compile and extract 3.3.5a. (Ubuntu Server 16.04).

Like I said before, this really isn't a "version" issue. If you compiled TC (3.3.5a), the issue is with your client asset extraction.
 

6 hours ago, Daniel25 said:

I thougth the same, so weird. +credit for helping people ;)

Not making any assumptions on the OP, but with my experience, most of the time it's an OP that doesn't like the answer, even if it's the right one. :D

-1

Share this post


Link to post
Share on other sites

Posted (edited)

@CDawg and @HannibalRoG

I would also like 2 know what's an OP? Operator?

Anyway, you guys seems 2 be very helpful and friendly which I do appreciate! Furthermore, I would like 2 know the difference of TrinityCore Repack and a self-compiled server of Trinitycore? Do I have any benefits compiling my own server? Why I am asking is cus after days of work, I must admit that I am simple not good enough 2 make my own compiled server, I do not have the knowledge yet... Also, back in the days had my own TrinityCore Repack up and running and even my online friends could come join. I think we were like 10 people online raiding Naxx. But a guy was able 2 put on cheat and TrinityCore's anticheat was not able 2 detect him cheating.

Edited by Chrisseria2520
0

Share this post


Link to post
Share on other sites
12 hours ago, HannibalRoG said:

@CDawg sorry, what its an OP.

Original poster
https://www.lifewire.com/what-does-o-p-stand-for-2483372
http://www.urbandictionary.com/define.php?term=op

http://lmgtfy.com/?q=what+is+op+on+forums

 

5 hours ago, Chrisseria2520 said:

Anyway, you guys seems 2 be very helpful and friendly which I do appreciate! Furthermore, I would like 2 know the difference of TrinityCore Repack and a self-compiled server of Trinitycore? Do I have any benefits compiling my own server? Why I am asking is cus after days of work, I must admit that I am simple not good enough 2 make my own compiled server, I do not have the knowledge yet... Also, back in the days had my own TrinityCore Repack up and running and even my online friends could come join. I think we were like 10 people online raiding Naxx. But a guy was able 2 put on cheat and TrinityCore's anticheat was not able 2 detect him cheating.

A repack is where you wont get support. It's a pre-comiled server package for people that are incompetent on building their own server. You get no updates, you can't fix core problems, and most of the time they are extremely outdated with so many bugs locked into a pre-compiled core that you have to deal with.

@Chrisseria2520 You said it best... You just explained that you had a negative experience with a repack (one of the largest) You had a guy that was able to cheat and hack your "repack" and there wasn't a single thing that you could do, due to someone else that created the server in a package nad not able to add special detection and core functions within a repack.

Look... People are lazy, i'm not saying you are. But don't let one small issue you run into block you from giving up. It's very very while worth it to compile your own server. Not only can you make custom modifications and keep your package up to date, but you will learn a lot from it and have the confidence to tell your friends that you may be able to fix a certain issue - since you will get support.

2

Share this post


Link to post
Share on other sites

@CDawg you're wise I see. Maybe I am lazy I don't know. I am just stuck after stuck. First I was able 2 get through Git Extensions, Cmake, Visual Studio and I was so far that I could even launch my self-compiled server just without Vmaps activated as this thread was all about. I thought that ... how do I explain this, but I thought that my computer got confused somehow of all the time I re-installed the repack and re-installed different kind of versions of programs that my computer just needed a reset, so I did a fully reset on my computer. After that I installed everything again (Git Extensions, Cmake, Visual Studio, OpenSSL HeidiSQL, Navicat and even more), I am just stuck at Cmake. I installed HeidiSLQ version 5.5, Cmake 3.9.4 and Visual Studio 2015 Community, and for some reason I am just stuck there now. 

I will try once again tomorrow since I would love to get this compiled server up and running.

0

Share this post


Link to post
Share on other sites

Posted (edited)

I would like 2 hear what kind of versions u guys use of Cmake and Visual Studio

Edited by Chrisseria2520
0

Share this post


Link to post
Share on other sites
On 7/10/2017 at 10:12 PM, Chrisseria2520 said:

I would like 2 hear what kind of versions u guys use of Cmake and Visual Studio

In your screenshots I see that you are using english in your OS so I guess that you dont know spanish but just in case that you do it, a video-guide in spanish Installing software requerided

I guess that you should to check the guide in the trinity wiki, you have everything that you need there,include the versions for every software need (HannibalRog gave you the link up).

0

Share this post


Link to post
Share on other sites

My guess work,

From the snippet, we see that your DataDir is ./ and that $DataDir/mmaps worked fine, but $DataDir/vmaps didn't. From this I feel that the error that reads "VMap file './vmaps/000.vmtree' does not exist" is actually "VMap file './vmaps/000.vmtree' does not exist for the version of the extractor-worldserver combination.

When making a version of tc (worldserver and tools), the extractor from the tools is made only for use with the world server (and vice versa).

So make sure that the "I start of copy -> paste" is executing the extractors from the same compile you made your worldserver from. If you have some other extractor version laying around, make sure that isn't used .... this is a problem.

I don't run windows, but i would expect to see authserver  mapextractor  mmaps_generator  vmap4assembler  vmap4extractor  worldserver in your bin directory, I do not ... so this suggests to me you are running 'tools' from another version or at least that was not compiled with your worldserver


Compile servers+tools, use the newly compiled tools to extract, populate the datadir ... fire up the database, copy the TDB, run the servers, profit.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By omgdior
      Hello user!  Help me please. How to extract the client DBC, Maps, VMaps & VMaps. I for some reason after 3.3.5 can not understand what to do in the new version. I hope for you.
    • By leandrod
        Hello guys , good night . I'm new here and I have a problem to extract the maps and vmaps and other game files version 3.3.5a , as created the server in a virtual machine and do not have much room to pass the entire game to the folder on Linux and why I need to do this process on windows and then move the files , but can not find the software to extract the files in windows . Someone would have these updated extractors to pass me ?