Jump to content
TrinityCore

"unknown column" "missing table" "duplicate column" error / sql problems / SQLDriverLogFile < answer on 1st post of 1st page


Apple
 Share

Recommended Posts

I´ve got good compile log so i will try to get better crashdump and then i will post it...

Server log


2011-10-09 22:53:09 Using configuration file worldserver.conf.

2011-10-09 22:53:09 TrinityCore rev. 2011-10-09 14:04:21 +0200 (3b4b6a2d9ab8) (Win32, Debug) (worldserver-daemon)

2011-10-09 22:53:09 <Ctrl-C> to stop.

2011-10-09 22:53:09  ______					   __

2011-10-09 22:53:09 /\__  _\	   __		  __/\ \__

2011-10-09 22:53:09 \/_/\ \/ _ __ /\_\    ___ /\_\ \, _\  __  __

2011-10-09 22:53:09    \ \ \/\`'__\/\ \ /' _ `\/\ \ \ \/ /\ \/\ \

2011-10-09 22:53:09	 \ \ \ \ \/ \ \ \/\ \/\ \ \ \ \ \_\ \ \_\ \

2011-10-09 22:53:09	  \ \_\ \_\  \ \_\ \_\ \_\ \_\ \__\\/`____ \

2011-10-09 22:53:09	   \/_/\/_/   \/_/\/_/\/_/\/_/\/__/ `/___/> \

2011-10-09 22:53:09								  C O R E  /\___/

2011-10-09 22:53:09 http://TrinityCore.org				    \/__/

2011-10-09 22:53:10 Realm running as realm ID 1

2011-10-09 22:53:10 Using World DB: TDB 335.11.41

2011-10-09 22:53:10 Using creature EventAI: TDBAI 335.0.3

2011-10-09 22:53:10 Will clear `logs` table of entries older than 1209600 seconds every 10 minutes.

2011-10-09 22:53:10 Using DataDir ./

2011-10-09 22:53:10 ERROR: VMap height checking disabled! Creatures movements and other various things WILL be broken! Expect no support.

2011-10-09 22:53:10 WORLD: VMap support included. LineOfSight:0, getHeight:0, indoorCheck:0 PetLOS:0

2011-10-09 22:53:10 WORLD: VMap data directory is: ./vmaps

2011-10-09 22:53:10

2011-10-09 22:53:10 Loading Trinity strings...

2011-10-09 22:53:10 >> Loaded 899 Trinity strings from table trinity_string in 28 ms

2011-10-09 22:53:10

2011-10-09 22:53:10 Initialize data stores...

2011-10-09 22:53:13 ERROR: SQL and DBC format strings are not matching for table: 'spell_dbc'

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 71356 at field id:2108 at spellid0 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 71803 at field id:2108 at spellid1 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 72111 at field id:2136 at spellid0 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 72125 at field id:2136 at spellid1 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 70816 at field id:2146 at spellid0 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 72233 at field id:2146 at spellid1 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 72234 at field id:2146 at spellid2 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:13 ERROR: spelldifficulty_dbc: spell 72235 at field id:2146 at spellid3 does not exist in SpellStore (spell.dbc), loaded as 0

2011-10-09 22:53:14 ERROR: Some required *.dbc files (1 from 94) not found or not compatible:

./dbc/Spell.dbc (exists, but has 234 fields instead of 234) Possible wrong client version.


Bump!

Edited by swiftblade19
Link to comment
Share on other sites

Well i just did a fresh TC install and got into the same error. Those dbc's are fine, they work with mangos.

Problem seems that some dbc table has wrong format (missing updates). Problem is that TC updates don't have versioning like mangos, so don't know what update to apply. This causes a pretty misleading error, don't know why TC doesn't have versioned updates...

Edited by darkstalker
Link to comment
Share on other sites

  • 1 month later...

Hi. I recently tried to make my server working via Linux.

I`m using a VPS with: CentOS 5

Trinity COre:(I used the guide from wiki to install libAce, succesfully, and I'm trying to make Jeutie's pack working. I keep getting problems over problems, but this I really can't fix it because I can't find any default characters.sql file.

I`m not sure what I need but anyway, please try to help me if you can.

It goes like THIS:

Opening databasepool 'world'. Async threads: 1, synch threads: 1

MySQL client library: 5.0.77

MySQL server ver: 5.0.77

MySQL client library: 5.0.77

MySQL server ver: 5.0.77

Databasepool opened succesfuly. 2 total connections running.

Opening databasepool 'characters'. Async threads: 1, synch threads: 2

MySQL client library: 5.0.77

MySQL server ver: 5.0.77

[ERROR]: In mysql_stmt_prepare() id: 14, sql: "SELECT guid, account, name, race, class, gender, level, xp, money, playerBytes, playerBytes2, playerFlags, position_x, position_y, position_z, map, orientation, taximask, cinematic, totaltime, leveltime, rest_bonus, logout_time, is_logout_resting, resettalents_cost, resettalents_time, trans_x, trans_y, trans_z, trans_o, transguid, extra_flags, stable_slots, at_login, zone, online, death_expire_time, taxi_path, instance_mode_mask, arenaPoints, totalHonorPoints, todayHonorPoints, yesterdayHonorPoints, totalKills, todayKills, yesterdayKills, chosenTitle, knownCurrencies, watchedFaction, drunk, health, power1, power2, power3, power4, power5, power6, power7, instance_id, speccount, activespec, exploredZones, equipmentCache, ammoId, knownTitles, actionBars, grantableLevels FROM characters WHERE guid = ?"

[ERROR]: Unknown column 'grantableLevels' in 'field list'

[ERROR]: In mysql_stmt_prepare() id: 19, sql: "SELECT quest, status, explored, timer, mobcount1, mobcount2, mobcount3, mobcount4, itemcount1, itemcount2, itemcount3, itemcount4, playercount FROM character_queststatus WHERE guid = ?"

[ERROR]: Unknown column 'playercount' in 'field list'

MySQL client library: 5.0.77

MySQL server ver: 5.0.77

MySQL client library: 5.0.77

MySQL server ver: 5.0.77

Databasepool opened succesfuly. 3 total connections running.

Cannot connect to Character database -----------------------------------;characters

~DatabaseWorkerPool for ''.

~DatabaseWorkerPool for 'characters'.

~DatabaseWorkerPool for 'world'.

Thank you.

Link to comment
Share on other sites

--- Canned message start ---

Trinity never has and never will support repacks. If you are too lazy to compile and configure the source yourself, you lose the right to ask any support questions on these boards. Please refer to the author of the repack for your questions.

--- Canned message end ---

  • Upvote 2
Link to comment
Share on other sites

  • 3 weeks later...

Hi, as we know new version (adapted to 4.x) is getting some problems...

By example, importing some sqls in "locales_quest" and "creature_ai_text" i got the next error (db fully updated):

ERROR 1054 (42S22) ...: Unknown column 'entry' in 'field list'

The column "entry" is physically there... (into locales_quest and creature_ai_text)

Personally i think (not only for this) if cata still not stable, at the moment, best option would have been leave changes aside, in another DB prepared to merged it when will ready... (because the DB is still used by the 3.x version) but that's only my personal feedback...

Link to comment
Share on other sites

I'm getting quite tired about repeating myself over and over...

There is not a single problem with the DB (nor on master nor on 4.x) related to SQL imports.

Import full 44 and then all the sql updates in /sql/update/world, ORDER MATTERS.

If you are trying to import some custom SQL it's up to you to fix it accordingly (the only table that was changed lately was quest_template)

Hi, as we know new version (adapted to 4.x) is getting some problems...

No, we don't.

Link to comment
Share on other sites

Mmmmmm maybe i understood this bad...

Note2: This will be the base DB for the 4.x branch (update will be done against this DB).

That mean the DB is prepared for 4.x or simply that you will upgrade it before v45 will be released?

In any case, sorry for my confusing.

Coming back to the topic... why is produced that sql error? i do all that i always do, clean install update db to the last version and import sqls (using the bat installer that comes with eswow2).

If a created this topic is because i never get that error... sorry :P

Thanks

Link to comment
Share on other sites

You are talking about locales so i guess you try to import a localized patch for any other language like spanish, or german. Because of the change in quest_template you have to change some things in the localization.

There should be something like

INSERT IGNORE INTO locales_quest (entry) SELECT entry FROM quest_template;
which you have to change to
INSERT IGNORE INTO locales_quest (entry) SELECT Id FROM quest_template;

Link to comment
Share on other sites

hehe you always so straightforward eh paradox xD

If i post it in TC forums is because i wanna know why always it was working and now not...just that

Athena did you mean in DB or in SQL file?

Firsts lines of locales_quest:


-- ==================== --

--	LOCALES_QUEST	 --

-- ==================== --


ALTER TABLE `locales_quest` CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;

/*Borrado del contenido de columnas previo a la actualizaci&#243;n */

UPDATE `locales_quest` SET `Title_loc6`=NULL WHERE `Title_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `Details_loc6`=NULL WHERE `Details_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `Objectives_loc6`=NULL WHERE `Objectives_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `OfferRewardText_loc6`=NULL WHERE `OfferRewardText_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `RequestItemsText_loc6`=NULL WHERE `RequestItemsText_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `EndText_loc6`=NULL WHERE `EndText_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `CompletedText_loc6`=NULL WHERE `CompletedText_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `ObjectiveText1_loc6`=NULL WHERE `ObjectiveText1_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `ObjectiveText2_loc6`=NULL WHERE `ObjectiveText2_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `ObjectiveText3_loc6`=NULL WHERE `ObjectiveText3_loc6` IS NOT NULL;

UPDATE `locales_quest` SET `ObjectiveText4_loc6`=NULL WHERE `ObjectiveText4_loc6` IS NOT NULL;

INSERT IGNORE INTO `locales_quest` (`entry`) SELECT `entry` FROM `quest_template`;

UPDATE `locales_quest` SET `Title_loc6`='Misi&#243;n de Kanrethad',`Details_loc6`='$gBienvenido:Bienvenida; de vuelta del mundo de los muertos.$B$BHace mucho tiempo tus hermanos te consideraban $gun orgulloso h&#233;roe:una orgullosa hero&#237;na;. Ahora has ca&#237;do y est&#225;s $gdestrozado:destrozada;... no eres m&#225;s que una reliquia del pasado. Col&#243;cate ante m&#237; para que pueda volver a despertar la leyenda que fuiste anta&#241;o.$B$BTe devolver&#233; los poderes y las armas que has perdido, y as&#237; volver&#225;s a estar $gcompleto:completa;.',`Objectives_loc6`='Habla con Kanrethad para que restaure tus talentos, armas y montura.$BIsla del Dise&#241;ador' WHERE `entry`='1';

UPDATE `locales_quest` SET `Title_loc6`='La garfa de Garrafilada',`Details_loc6`='El poderoso hipogrifo Garrafilada ha sido ejecutado, con la garra de la bestia derribada como testimonio de tu victoria. Seguro que Senani Truenoz&#243;n, del Puesto del Hachazo, estar&#225; interesado en ver este trofeo que prueba tus actos.',`Objectives_loc6`='Ll&#233;vale la garra de Garrafilada a Senani Truenoz&#243;n en el Puesto del Hachazo, Vallefresno.' WHERE `entry`='2';

Firsts lines of creature_ai_texts:

-- ======================= --

--   CREATURE_AI_TEXTS	 --

-- ======================= --

ALTER TABLE `locales_quest` CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci;

INSERT IGNORE INTO `locales_quest` (`entry`) SELECT `entry` FROM `quest_template`;

UPDATE `creature_ai_texts` SET `content_loc6`='Parece que esos idiotas de la Abad&#237;a nos han enviado carne fresca.' WHERE `entry`='-1' ;

UPDATE `creature_ai_texts` SET `content_loc6`='La Hermandad no tolerar&#225; tus actos.' WHERE `entry`='-2' ;

UPDATE `creature_ai_texts` SET `content_loc6`='Ah, una oportunidad para usar esta hoja reci&#233;n afilada.' WHERE `entry`='-3' ;

UPDATE `creature_ai_texts` SET `content_loc6`='&#161;Siente el poder de la Hermandad!' WHERE `entry`='-4' ;

I have to do what Micha told me, no???

Thanks Micha!! Now it work. :)

Link to comment
Share on other sites

Just for example: you have a printer runing on windows xp quit fine. After upgrading to windows 7 the printer stop working because there is no driver for win7. Where do you ask for help? Are you going to ask microsoft for support or the printers manufacturer?

It is the same with external programs for trinitycore like truice or eswow2. Whenever tc changes something in the tablestructure of the database the developers of the external program have to adjust their code or querries. Not the trinitycore team. Simple as that.

And whenever somebody is giving you a hint how to solve a problem you have to try to follow it before writing new posts. As you may saw, my hint solves your problem but before you note this, you write more and more. That is why para is that "straightforward".

  • Upvote 1
Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By xgamerninjax
      Hello all, first time posting here and it's really got me scratching my head.
      I've compiled everything on my own computer, and then transferred everything to a host computer so the server can stay live. The server was running fine for a month or so and then suddenly it just crashes when it hits "Loading C++ scripts", exiting saying "caught signal 22"
      I tried setting up the host computer from scratch and transferred everything over fresh and it's still happening for some reason. (Note, I can run the server perfectly on my personal pc where I compiled it.)
      Any help would be greatly appreciated, thanks!
      3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].dmp 3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].txt
    • By Rochet2
      A lot of people have asked how to debug so I made this short guide on how to set up debugging.
      This guide only tells you how to actually set up debugging in TrinityCore on Windows and Linux.
      This will not explain the basics of debugging. You can google those or play around with the debugger to learn.
      Here are a few videos that explain how to actually debug after setting debugging up on visual studio: https://youtu.be/0ebzPwixrJA and linux: https://www.youtube.com/watch?v=sCtY--xRUyI

      This guide contains multiple guides. Each list of bullet points is it's own guide.
      Make sure you can run the server normally before trying to debug.

      Windows:
      On Windows before anything you should check these
      - Before debugging or making crashlogs etc. with Visual Studio you must compile the core in "Debug" instead of "Release". You can select this in "Build>Configuration Manager" or at the top of Visual Studio window http://i.imgur.com/5oHd59j.png
      - You also need to move the new pdb files generate by compiling in debug mode on Visual Studio from the compile output folder (bin) to your server folder - these files contain information needed for debugging.
      - It is assumed that Solution Explorer is open. Open it by selecting "View>Solution Explorer" in Visual Studio http://i.imgur.com/hkW6Gk0.png
      -- You may want to click on the Home icon to reset the view on Solution Explorer http://i.imgur.com/N8UPwDh.png
      - You can place breakpoints in Visual Studio editor by right clicking a line of code and selecting "Breakpoint>Insert Breakpoint" http://i.imgur.com/L2TxBVG.png
      - At the top of the window you should see controls for stepping and continuing when you have started to debug.
      - Here is a video showing the basic Visual Studio functionality https://www.youtube.com/watch?v=Ijdk4z8-2OI
      Fastest way to debug on windows. This is the easiest way to start up debugging a script.
      - Start the authserver and worldserver normally
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In Visual Studio at the top select "Debug>Attach to process...>worldserver.exe" and click "Attach" http://i.imgur.com/jDEI2Hq.png
      - You are now debugging
       
      The second slower way of debugging on windows. This is useful for debugging something that occurs in the startup of the server.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Set as StartUp Project" http://i.imgur.com/wvMzeRA.png
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties you should go to "Configuration Properties>Debugging" and edit "Working Directory" to point to the server folder. For me this is the default compile folder so I use "$(OutDir)" http://i.imgur.com/aRI29fB.png
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging". The server will start with debugging attached from the beginning http://i.imgur.com/cg1KJNw.png
      - You are now debugging
      Crashlogs on windows. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - After compiling the core in "Debug" instead of "Release" start up the worldserver and authserver
      - Reproduce the crash you have
      - In the server folder there is now a folder called Crashes that contains txt and dmp files. http://i.imgur.com/9eQIdql.png
      - You can open the txt files in text editors http://i.imgur.com/EH6R17E.png
      -- At the top of a txt file there is some information about your system and below it there is the Call Stack and below that there are Variables of each part of the call stack
      -- The Call Stack will tell you at the top what was the last function call before crashing and what function calls led to that function call.
      -- Next to the function names there is the file that the function is defined in and the line number the code was executing in that function.
      -- In the Variables section you can inspect variables that were present at each function call.
      -- Based on this information you are often able to see what crashed or get a better view of what you need to inspect more in your code.
      - The dmp file can be opened in Visual Studio
      -- Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      -- Drag and drop the dmp file to Visual Studio
      -- In the window that opens click to "Debug with Native Only" http://i.imgur.com/OgyU2kM.png
      -- In the window popup click "Break" http://i.imgur.com/4jDzqRn.png
      -- You are now in a state like you would have hit a break point in the code or a crash while debugging. You can inspect the call stack and the variables.
      Edit and continue on windows. When debugging this allows you to change the code and without restarting the server apply those changes so they actually work ingame.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties select "Configuration Properties>Linker>General" and set "Enable Incremental Linking" to "Yes". http://i.imgur.com/caQqwN5.png
      -- In Properties select "Configuration Properties>Linker>Advanced" and set "Image Has Safe Exception Handlers" to "No". http://i.imgur.com/FYzN8Ks.png
      -- In Properties select "Configuration Properties>C/C++>General" and set "Debug Information Format" to "Program Database for Edit And Continue". http://i.imgur.com/pxQ6I8N.png
      - At the top of the window select "Tools>Options". In the Options select "Debugging>General" and in there select "Enable Edit and Continue", "Enable Native Edit and Continue" and "Require source files to exactly match the original version".
      - Compile the server for the changes to take effect.
      - Set up "The second slower way of debugging" (I did not test edit and continue on other configurations)
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging".
      - Try edit a cpp file a little and save it.
      - At top of Visual Studio window select "Debug>Apply Code Changes" and wait until the changes are applied. Warning: it can take considerable amount of time for the changes to be applied. http://i.imgur.com/77pb58E.png
      - If you have issues, be sure to check the error messages in Output. You can view it by selecting "View>Output" http://i.imgur.com/4cIznW9.png
      - This guide was written based on https://msdn.microsoft.com/en-us/library/esaeyddf.aspx and https://blogs.msdn.microsoft.com/vcblog/2015/07/22/c-edit-and-continue-in-visual-studio-2015/
      Linux:
      First we need to compile the server in debug mode.
      - Compile the server with the cmake flag -DCMAKE_BUILD_TYPE=Debug

      Debugging on linux. You can debug on linux by using GDB.
      - Here is a good video about it: https://www.youtube.com/watch?v=sCtY--xRUyI
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "gdb ./worldserver"
      -- Enter breakpoints by using break command on gdb
      -- Use the run command on gdb to start the server
      -- You are now debugging
      - You may also be interested in using VScode or some other more visual debuggers. https://www.youtube.com/watch?v=B0xTgyCwsAo
      Crashlogs on linux. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - Take crashreport.gdb from /contrib/debugger from source folder and place it to your server folder
      - Start the authserver
      - Start the worldserver by using "gdb -x crashreport.gdb ./worldserver"
      - Reproduce your crash
      - There should be a backtrace.log in your server folder that contains information about the crash like the callstack and variables in each function call in the call stack
      - This guide was written based on https://github.com/TrinityCore/TrinityCore/blob/master/contrib/debugger/README
      Running valgrind on linux. This helps you find memory errors like invalid reads and writes and memory leaks.
      - Here is a good video about it: https://www.youtube.com/watch?v=fvTsFjDuag8
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "valgrind ./worldserver"
      -- Run your code that you want to analyze and close the server
      -- The console or an output log should contain the valgrind log
    • By reyne
      Hey there!

      I've followed a few threads here about map extraction, and am still having issues. Originally, I was having the issue described here.
      After following the advice given in that thread (creating characters of both BC races and running around for a bit), I am no longer getting that error, however now I get the following error while trying to extract maps:

      `Error loading World\Maps\Expansion01\Expansion01_42_6.adt`

      This repeats for every line in Expansion01, and then the extractor crashes.

      I'm not sure where else to go from here.

      Thanks for your help

      Edit: I've created an 85 on an i85 server and flown all around Outland now, same issue.
    • By Uee
      I recently found the Trinity Cataclsym Preservation Project and thought I will try it out.
      I am already running 3.3.5a and Master - both server run great
      Pulled 4.3.4 down using Git and built it same way as others:
      boost_1_73_0 cmake 3.17.2 Mysql 5.7.30 VS Community 2019 Built fine - no issue. Used 'Extractor.bat' to run all the map extractors - worked great!
      Noticed there was extra file 'connection_patcher.exe`, ran that - worked great! Now have "wow_patched" and use this to launch client
      MySQL runs in standalone mode, -initialize, added base sql files, imported, auth and character sql files
      Configured both the .conf files and passwords, IPs etc are all in place.
      Note: When loading the exe and built conf file, bnetserver complain about these items missing, so I add them:
      Updates.AutoSetup = 1 Updates.EnableDatabases = 0 LoginDatabase.SynchThreads = 1 Load up Mysql - loads fine
      Load up bnetserver and appears to load ok - last few lines look like this:
      Connected to MySQL database at 127.0.0.1
      DatabasePool 'auth' opened successfully. 2 total connections running.
      Started auth database connection pool.
      Listening on connections from worldservers on port 1118...
      Load up worldserver and it adds the FULL world and hotfixes, then applied all updates (confirmed archived in SQL) - last few lines look like this:
      Calculate next monthly quest reset time...
      Calculate random battleground reset time...
      Calculate guild limitation(s) reset time...
      Calculate next currency reset time...
      World initialized in 0 minutes 13 seconds
      TrinityCore rev. d0c7bbab40bc 2020-05-06 00:01:21 +0200 (master branch) (Win64, RelWithDebInfo, Static) (worldserver-daemon) ready...
       
      There are no db errors in logs.
      Config.wtf contain portal, realmlist as remote server and patchlist as localhost.
      When I try to connecting using "user@local" and password I get immediately disconnected.
      What I did noticed different is that the bnetserver doesnt add "Added realm "Battle for Azeroth" at 192.168.10.213:8085." (From my Master log) 
      3.3.5a also have this line as last line in authserver - but 4.3.4 is not giving me this one.
      Realmlist table is accurate with right information.
      Anyone know why bnetserver is not starting me realm?
       
    • By Deer_Hunter
      Hello all,
      I just updated from the latest Git 
      Trinity Core REV. ac6baa547376 + 2020-02-21  3.3.5 Branch.
      I'm getting this error after crash.
      Problem signature:
        Problem Event Name:    APPCRASH
        Application Name:    worldserver.exe
        Application Version:    0.0.0.0
        Application Timestamp:    5e50a462
        Fault Module Name:    StackHash_f12f
        Fault Module Version:    6.3.9600.19629
        Fault Module Timestamp:    5e2fdc0d
        Exception Code:    c0000374
        Exception Offset:    PCH_9E_FROM_ntdll+0x0000000000090D0A
        OS Version:    6.3.9600.2.0.0.272.7
        Locale ID:    1033
        Additional Information 1:    f12f
        Additional Information 2:    f12f0934d3e965f73c68e60f20f2cd40
        Additional Information 3:    7595
        Additional Information 4:    7595e4d8d703db9dcd3d2f6ea540e357
      the exception code says its a Heap error,  I'm not sure how to troubleshoot this.
      Thanks
×
×
  • Create New...