Jump to content
TrinityCore

"unknown column" "missing table" "duplicate column" error / sql problems / SQLDriverLogFile < answer on 1st post of 1st page


Apple
 Share

Recommended Posts

The latest version of SQL version 5.5.24 is bugged. If you are installing a new version use a previos version!

Also, if your MySQL Workbench version freezes, use the MySQL Server Commandline instead.

After login, enter:

/u<space><databasename><enter>

/.<space><Driveletter:><path><filename.sql><enter>

That works fine and very fast also!

Link to comment
Share on other sites

  • 2 weeks later...

Hi

I just finished installing and had issue with the world server and the database as well.

I am doing it under Linux so paths are a bit different.

I used the TDB_full_335.11.47_2012_05_19.sql file. I had to install updates found in ../TrinityCore/sql/updates/world (including those from 05_19, not all are there just did them in order, starting with lowest (03)). I have a total of 71 updates in there.

I am still stuck in how exactly authorization works so havent been on the server yet, but both auth and worldserver starts and says its ready with no errors in log (except for failed log ins in auth.log).

Link to comment
Share on other sites

it said 2 warrnings in last query whene i import characters_2012_02_13_2012_05_19

Hmm i re-build all DB and when import character_database from IC again this warrning.

Its the last rows from DB filter

/*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */;

/*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */;

/*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */;

/*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */;

/*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */;

-- Dump completed on 2011-04-04 21:03:41

;

/* Affected rows: 4 Found rows: 0 Warnings: 2 Duration for 686 queries: 6,030 sec. */

SHOW WARNINGS LIMIT 5;

Edited by devastor
Link to comment
Share on other sites

damn

2012-06-03 22:07:06 Using configuration file worldserver.conf.

2012-06-03 22:07:06 Using SSL version: OpenSSL 1.0.1c 10 May 2012 (library: OpenSSL 1.0.1c 10 May 2012)

2012-06-03 22:07:06 Using ACE version: 5.8.3

2012-06-03 22:07:06 TrinityCore rev. 0000-00-00 00:00:00 +0000 (Archived) (Win32, Release) (worldserver-daemon)

2012-06-03 22:07:06 <Ctrl-C> to stop.

2012-06-03 22:07:06 ______ __

2012-06-03 22:07:06 /__ _ __ __/ __

2012-06-03 22:07:06 /_/ / _ __ /_ ___ /_ , _ __ __

2012-06-03 22:07:06 /`'__/ /' _ `/ / / /

2012-06-03 22:07:06 / / / _ _

2012-06-03 22:07:06 _ _ _ _ _ _ __/`____

2012-06-03 22:07:06 /_//_/ /_//_//_//_//__/ `/___/>

2012-06-03 22:07:06 C O R E /___/

2012-06-03 22:07:06 http://TrinityCore.org /__/

2012-06-03 22:07:07 ERROR: DatabasePool characters NOT opened. There were errors opening the MySQL connections. Check your SQLDriverLogFile for specific errors.

2012-06-03 22:07:07 ERROR: Cannot connect to Character database 127.0.0.1;3306;root;ascent;characters

Link to comment
Share on other sites

For the last time, this is what you need to do with the DBs:

Link to comment
Share on other sites

OMG now i got

2012-06-03 23:18:16 Using configuration file worldserver.conf.

2012-06-03 23:18:16 Using SSL version: OpenSSL 1.0.1c 10 May 2012 (library: OpenSSL 1.0.1c 10 May 2012)

2012-06-03 23:18:16 Using ACE version: 5.8.3

2012-06-03 23:18:16 TrinityCore rev. 0000-00-00 00:00:00 +0000 (Archived) (Win32, Release) (worldserver-daemon)

2012-06-03 23:18:16 <Ctrl-C> to stop.

2012-06-03 23:18:16 ______ __

2012-06-03 23:18:16 /__ _ __ __/ __

2012-06-03 23:18:16 /_/ / _ __ /_ ___ /_ , _ __ __

2012-06-03 23:18:16 /`'__/ /' _ `/ / / /

2012-06-03 23:18:16 / / / _ _

2012-06-03 23:18:16 _ _ _ _ _ _ __/`____

2012-06-03 23:18:16 /_//_/ /_//_//_//_//__/ `/___/>

2012-06-03 23:18:16 C O R E /___/

2012-06-03 23:18:16 http://TrinityCore.org /__/

2012-06-03 23:18:16 ERROR: DatabasePool world NOT opened. There were errors opening the MySQL connections. Check your SQLDriverLogFile for specific errors.

2012-06-03 23:18:16 ERROR: Cannot connect to world database 127.0.0.1;3306;root;ascent;world

Link to comment
Share on other sites

i fixed it and again

2012-06-04 00:31:11 Using configuration file worldserver.conf.

2012-06-04 00:31:11 Using SSL version: OpenSSL 1.0.1c 10 May 2012 (library: OpenSSL 1.0.1c 10 May 2012)

2012-06-04 00:31:11 Using ACE version: 5.8.3

2012-06-04 00:31:11 TrinityCore rev. 0000-00-00 00:00:00 +0000 (Archived) (Win32, Release) (worldserver-daemon)

2012-06-04 00:31:11 <Ctrl-C> to stop.

2012-06-04 00:31:11 ______ __

2012-06-04 00:31:11 /__ _ __ __/ __

2012-06-04 00:31:11 /_/ / _ __ /_ ___ /_ , _ __ __

2012-06-04 00:31:11 /`'__/ /' _ `/ / / /

2012-06-04 00:31:11 / / / _ _

2012-06-04 00:31:11 _ _ _ _ _ _ __/`____

2012-06-04 00:31:11 /_//_/ /_//_//_//_//__/ `/___/>

2012-06-04 00:31:11 C O R E /___/

2012-06-04 00:31:11 http://TrinityCore.org /__/

2012-06-04 00:31:12 ERROR: DatabasePool characters NOT opened. There were errors opening the MySQL connections. Check your SQLDriverLogFile for specific errors.

2012-06-04 00:31:12 ERROR: Cannot connect to Character database 127.0.0.1;3306;trinity;trinity;characters

i got this error with auth database but update auth_2012_02_13_2012_05_19 fixed the auth error when im tring to update characters its said:

Warrning in was 2 query :/

I did 2 3 times reinstal on TC and again this problem :/

Edited by devastor
Link to comment
Share on other sites

If you read the wiki step-by-step without missing any step and any update you will have Trinity up and running.

Your problem is on your database, so no need to rebuild your core (unless you are pulling it again from repo).

Link to comment
Share on other sites

There's no such table, stop using repacks.

And did I tell you to import "characters_2012_02_13_2012_05_19"? NO.

Seriously, I get (s|m)ad when people have problems because simply they can not read.

Link to comment
Share on other sites

Seems like a hidden cam...

First:

2012-06-03 22:07:07 ERROR: Cannot connect to Character database 127.0.0.1;3306;root;ascent;characters

After:

2012-06-04 00:31:12 ERROR: Cannot connect to Character database 127.0.0.1;3306;trinity;trinity;characters

Did this guy READ his logs?

...

Hahahaha

  • Upvote 1
Link to comment
Share on other sites

NVM it was my own stupid mistake. i didnt click run is all. everything seems fine now except my auth server.exe works fine but world does not for some reason. it just closes the moment it opens

What does your worldserver log say? Usually this is an invalid maps/vmaps directory or a problem with MySQL.

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By xgamerninjax
      Hello all, first time posting here and it's really got me scratching my head.
      I've compiled everything on my own computer, and then transferred everything to a host computer so the server can stay live. The server was running fine for a month or so and then suddenly it just crashes when it hits "Loading C++ scripts", exiting saying "caught signal 22"
      I tried setting up the host computer from scratch and transferred everything over fresh and it's still happening for some reason. (Note, I can run the server perfectly on my personal pc where I compiled it.)
      Any help would be greatly appreciated, thanks!
      3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].dmp 3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].txt
    • By Rochet2
      A lot of people have asked how to debug so I made this short guide on how to set up debugging.
      This guide only tells you how to actually set up debugging in TrinityCore on Windows and Linux.
      This will not explain the basics of debugging. You can google those or play around with the debugger to learn.
      Here are a few videos that explain how to actually debug after setting debugging up on visual studio: https://youtu.be/0ebzPwixrJA and linux: https://www.youtube.com/watch?v=sCtY--xRUyI

      This guide contains multiple guides. Each list of bullet points is it's own guide.
      Make sure you can run the server normally before trying to debug.

      Windows:
      On Windows before anything you should check these
      - Before debugging or making crashlogs etc. with Visual Studio you must compile the core in "Debug" instead of "Release". You can select this in "Build>Configuration Manager" or at the top of Visual Studio window http://i.imgur.com/5oHd59j.png
      - You also need to move the new pdb files generate by compiling in debug mode on Visual Studio from the compile output folder (bin) to your server folder - these files contain information needed for debugging.
      - It is assumed that Solution Explorer is open. Open it by selecting "View>Solution Explorer" in Visual Studio http://i.imgur.com/hkW6Gk0.png
      -- You may want to click on the Home icon to reset the view on Solution Explorer http://i.imgur.com/N8UPwDh.png
      - You can place breakpoints in Visual Studio editor by right clicking a line of code and selecting "Breakpoint>Insert Breakpoint" http://i.imgur.com/L2TxBVG.png
      - At the top of the window you should see controls for stepping and continuing when you have started to debug.
      - Here is a video showing the basic Visual Studio functionality https://www.youtube.com/watch?v=Ijdk4z8-2OI
      Fastest way to debug on windows. This is the easiest way to start up debugging a script.
      - Start the authserver and worldserver normally
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In Visual Studio at the top select "Debug>Attach to process...>worldserver.exe" and click "Attach" http://i.imgur.com/jDEI2Hq.png
      - You are now debugging
       
      The second slower way of debugging on windows. This is useful for debugging something that occurs in the startup of the server.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Set as StartUp Project" http://i.imgur.com/wvMzeRA.png
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties you should go to "Configuration Properties>Debugging" and edit "Working Directory" to point to the server folder. For me this is the default compile folder so I use "$(OutDir)" http://i.imgur.com/aRI29fB.png
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging". The server will start with debugging attached from the beginning http://i.imgur.com/cg1KJNw.png
      - You are now debugging
      Crashlogs on windows. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - After compiling the core in "Debug" instead of "Release" start up the worldserver and authserver
      - Reproduce the crash you have
      - In the server folder there is now a folder called Crashes that contains txt and dmp files. http://i.imgur.com/9eQIdql.png
      - You can open the txt files in text editors http://i.imgur.com/EH6R17E.png
      -- At the top of a txt file there is some information about your system and below it there is the Call Stack and below that there are Variables of each part of the call stack
      -- The Call Stack will tell you at the top what was the last function call before crashing and what function calls led to that function call.
      -- Next to the function names there is the file that the function is defined in and the line number the code was executing in that function.
      -- In the Variables section you can inspect variables that were present at each function call.
      -- Based on this information you are often able to see what crashed or get a better view of what you need to inspect more in your code.
      - The dmp file can be opened in Visual Studio
      -- Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      -- Drag and drop the dmp file to Visual Studio
      -- In the window that opens click to "Debug with Native Only" http://i.imgur.com/OgyU2kM.png
      -- In the window popup click "Break" http://i.imgur.com/4jDzqRn.png
      -- You are now in a state like you would have hit a break point in the code or a crash while debugging. You can inspect the call stack and the variables.
      Edit and continue on windows. When debugging this allows you to change the code and without restarting the server apply those changes so they actually work ingame.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties select "Configuration Properties>Linker>General" and set "Enable Incremental Linking" to "Yes". http://i.imgur.com/caQqwN5.png
      -- In Properties select "Configuration Properties>Linker>Advanced" and set "Image Has Safe Exception Handlers" to "No". http://i.imgur.com/FYzN8Ks.png
      -- In Properties select "Configuration Properties>C/C++>General" and set "Debug Information Format" to "Program Database for Edit And Continue". http://i.imgur.com/pxQ6I8N.png
      - At the top of the window select "Tools>Options". In the Options select "Debugging>General" and in there select "Enable Edit and Continue", "Enable Native Edit and Continue" and "Require source files to exactly match the original version".
      - Compile the server for the changes to take effect.
      - Set up "The second slower way of debugging" (I did not test edit and continue on other configurations)
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging".
      - Try edit a cpp file a little and save it.
      - At top of Visual Studio window select "Debug>Apply Code Changes" and wait until the changes are applied. Warning: it can take considerable amount of time for the changes to be applied. http://i.imgur.com/77pb58E.png
      - If you have issues, be sure to check the error messages in Output. You can view it by selecting "View>Output" http://i.imgur.com/4cIznW9.png
      - This guide was written based on https://msdn.microsoft.com/en-us/library/esaeyddf.aspx and https://blogs.msdn.microsoft.com/vcblog/2015/07/22/c-edit-and-continue-in-visual-studio-2015/
      Linux:
      First we need to compile the server in debug mode.
      - Compile the server with the cmake flag -DCMAKE_BUILD_TYPE=Debug

      Debugging on linux. You can debug on linux by using GDB.
      - Here is a good video about it: https://www.youtube.com/watch?v=sCtY--xRUyI
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "gdb ./worldserver"
      -- Enter breakpoints by using break command on gdb
      -- Use the run command on gdb to start the server
      -- You are now debugging
      - You may also be interested in using VScode or some other more visual debuggers. https://www.youtube.com/watch?v=B0xTgyCwsAo
      Crashlogs on linux. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - Take crashreport.gdb from /contrib/debugger from source folder and place it to your server folder
      - Start the authserver
      - Start the worldserver by using "gdb -x crashreport.gdb ./worldserver"
      - Reproduce your crash
      - There should be a backtrace.log in your server folder that contains information about the crash like the callstack and variables in each function call in the call stack
      - This guide was written based on https://github.com/TrinityCore/TrinityCore/blob/master/contrib/debugger/README
      Running valgrind on linux. This helps you find memory errors like invalid reads and writes and memory leaks.
      - Here is a good video about it: https://www.youtube.com/watch?v=fvTsFjDuag8
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "valgrind ./worldserver"
      -- Run your code that you want to analyze and close the server
      -- The console or an output log should contain the valgrind log
    • By reyne
      Hey there!

      I've followed a few threads here about map extraction, and am still having issues. Originally, I was having the issue described here.
      After following the advice given in that thread (creating characters of both BC races and running around for a bit), I am no longer getting that error, however now I get the following error while trying to extract maps:

      `Error loading World\Maps\Expansion01\Expansion01_42_6.adt`

      This repeats for every line in Expansion01, and then the extractor crashes.

      I'm not sure where else to go from here.

      Thanks for your help

      Edit: I've created an 85 on an i85 server and flown all around Outland now, same issue.
    • By Uee
      I recently found the Trinity Cataclsym Preservation Project and thought I will try it out.
      I am already running 3.3.5a and Master - both server run great
      Pulled 4.3.4 down using Git and built it same way as others:
      boost_1_73_0 cmake 3.17.2 Mysql 5.7.30 VS Community 2019 Built fine - no issue. Used 'Extractor.bat' to run all the map extractors - worked great!
      Noticed there was extra file 'connection_patcher.exe`, ran that - worked great! Now have "wow_patched" and use this to launch client
      MySQL runs in standalone mode, -initialize, added base sql files, imported, auth and character sql files
      Configured both the .conf files and passwords, IPs etc are all in place.
      Note: When loading the exe and built conf file, bnetserver complain about these items missing, so I add them:
      Updates.AutoSetup = 1 Updates.EnableDatabases = 0 LoginDatabase.SynchThreads = 1 Load up Mysql - loads fine
      Load up bnetserver and appears to load ok - last few lines look like this:
      Connected to MySQL database at 127.0.0.1
      DatabasePool 'auth' opened successfully. 2 total connections running.
      Started auth database connection pool.
      Listening on connections from worldservers on port 1118...
      Load up worldserver and it adds the FULL world and hotfixes, then applied all updates (confirmed archived in SQL) - last few lines look like this:
      Calculate next monthly quest reset time...
      Calculate random battleground reset time...
      Calculate guild limitation(s) reset time...
      Calculate next currency reset time...
      World initialized in 0 minutes 13 seconds
      TrinityCore rev. d0c7bbab40bc 2020-05-06 00:01:21 +0200 (master branch) (Win64, RelWithDebInfo, Static) (worldserver-daemon) ready...
       
      There are no db errors in logs.
      Config.wtf contain portal, realmlist as remote server and patchlist as localhost.
      When I try to connecting using "user@local" and password I get immediately disconnected.
      What I did noticed different is that the bnetserver doesnt add "Added realm "Battle for Azeroth" at 192.168.10.213:8085." (From my Master log) 
      3.3.5a also have this line as last line in authserver - but 4.3.4 is not giving me this one.
      Realmlist table is accurate with right information.
      Anyone know why bnetserver is not starting me realm?
       
    • By Deer_Hunter
      Hello all,
      I just updated from the latest Git 
      Trinity Core REV. ac6baa547376 + 2020-02-21  3.3.5 Branch.
      I'm getting this error after crash.
      Problem signature:
        Problem Event Name:    APPCRASH
        Application Name:    worldserver.exe
        Application Version:    0.0.0.0
        Application Timestamp:    5e50a462
        Fault Module Name:    StackHash_f12f
        Fault Module Version:    6.3.9600.19629
        Fault Module Timestamp:    5e2fdc0d
        Exception Code:    c0000374
        Exception Offset:    PCH_9E_FROM_ntdll+0x0000000000090D0A
        OS Version:    6.3.9600.2.0.0.272.7
        Locale ID:    1033
        Additional Information 1:    f12f
        Additional Information 2:    f12f0934d3e965f73c68e60f20f2cd40
        Additional Information 3:    7595
        Additional Information 4:    7595e4d8d703db9dcd3d2f6ea540e357
      the exception code says its a Heap error,  I'm not sure how to troubleshoot this.
      Thanks
×
×
  • Create New...