Jump to content
TrinityCore

Dbc, Maps, mmaps, Vmaps problems


Munga
 Share

Recommended Posts

Please put the source on C:/Source (or something, but the folder needs to be in root hard disk) and make new folder called "Build" (for example) on same place, like this:

C:/Source

C:/Build

Now try to "Configure" in cmake program, it will run all things without error, now mark "DTOOLS" for generating these tools, click on configure again, and then click on generate.

** Repeat configure if you have any table of config param in RED

Now follow the instructions what you can see in trinity core wiki, you now should build map tools without any error ;)

P.D. U only need dbc, map and vmap folders.

*ATTENTION* Without vmap folder your server cant have 100% experience of playing wow, without vmaps npcs and "monsters" run under the floor and dead corpses will go down and you will lost the drops (in some cases)

(Sorry if my english is bad or u cant understand me... and i dont use google translator.. lol)

Edited by DjYXA
Link to comment
Share on other sites

hello people. i've just compiled server on debian, but i have no client on server to extract vmaps...

vmaps from windows doesn't works..


Using DataDir /home/pro/trinity/server/

WORLD: VMap support included. LineOfSight:1, getHeight:1, indoorCheck:1 PetLOS:1

WORLD: VMap data directory is: /home/pro/trinity/server/vmaps

VMap file '/home/pro/trinity/server/vmaps/000.vmtree' is missing or points to wrong version of vmap file. R

edo vmaps with latest version of vmap_assembler.exe.

Correct *.map files not found in path '/home/pro/trinity/server/maps' or *.vmtree/*.vmtile files in '/home/

pro/trinity/server/vmaps'. Please place *.map/*.vmtree/*.vmtile files in appropriate directories or correct

the DataDir value in the worldserver.conf file.

got this error..

can someone share vmaps files for linux please?

3.3.5a client version

thanks

Edited by maxo-tt
Link to comment
Share on other sites

--- Canned message start ---

I would love to be able to just say: "Look in upper right hand corner of the forum, there is a button labeled SEARCH, please use it", but I don't think that will be enough therefore I present to you:

searchbuttonfordummieslsq1.jpg

Please read it cover to cover, and don't bother posting again until you do!

--- Canned message end ---

Link to comment
Share on other sites

--- Canned message start ---

I would love to be able to just say: "Look in upper right hand corner of the forum, there is a button labeled SEARCH, please use it", but I don't think that will be enough therefore I present to you:

searchbuttonfordummieslsq1.jpg

Please read it cover to cover, and don't bother posting again until you do!

--- Canned message end ---

Link to comment
Share on other sites

because our genius moderator did a mistake and closed my topic, doesnt answers my message, think i can reopen it.

i need help here and not teach how to use search! i've already searched whole forum.

original post:

hello people. i've just compiled server on debian, but i have no client on server to extract vmaps...

vmaps from windows doesn't works..

Using DataDir /home/pro/trinity/server/

WORLD: VMap support included. LineOfSight:1, getHeight:1, indoorCheck:1 PetLOS:1

WORLD: VMap data directory is: /home/pro/trinity/server/vmaps

VMap file '/home/pro/trinity/server/vmaps/000.vmtree' is missing or points to wrong version of vmap file. R

edo vmaps with latest version of vmap_assembler.exe.

Correct *.map files not found in path '/home/pro/trinity/server/maps' or *.vmtree/*.vmtile files in '/home/

pro/trinity/server/vmaps'. Please place *.map/*.vmtree/*.vmtile files in appropriate directories or correct

the DataDir value in the worldserver.conf file.

got this error..

can someone share vmaps files for linux please?

3.3.5a client version

thanks

old thread link: http://www.trinitycore.org/f/topic/5620-vmaps-debian-335a/

Link to comment
Share on other sites

because our genius moderator did a mistake and closed my topic, doesnt answers my message, think i can reopen it.

i need help here and not teach how to use search! i've already searched whole forum.

original post:

hello people. i've just compiled server on debian, but i have no client on server to extract vmaps...

vmaps from windows doesn't works..

Using DataDir /home/pro/trinity/server/

WORLD: VMap support included. LineOfSight:1, getHeight:1, indoorCheck:1 PetLOS:1

WORLD: VMap data directory is: /home/pro/trinity/server/vmaps

VMap file '/home/pro/trinity/server/vmaps/000.vmtree' is missing or points to wrong version of vmap file. R

edo vmaps with latest version of vmap_assembler.exe.

Correct *.map files not found in path '/home/pro/trinity/server/maps' or *.vmtree/*.vmtile files in '/home/

pro/trinity/server/vmaps'. Please place *.map/*.vmtree/*.vmtile files in appropriate directories or correct

the DataDir value in the worldserver.conf file.

got this error..

can someone share vmaps files for linux please?

3.3.5a client version

thanks

old thread link: http://www.trinityco...ps-debian-335a/

god damn.

where did you guys find this moderator? let me know the source...

post-13636-0-54154100-1329470725_thumb.j

Link to comment
Share on other sites

to genius moderator: dont close my topic! i need help and i have a right to open a thread. while i cant find on forum!

No, you have no rights. This is a volunteer community of private members. Nobody guaranteed you help and support or even that you could create an account. Drop the entitlement attitude.

i need vmap4extractor and assembler for windows...

So compile it. It's included in the GitHub repository where you should have found all the rest of the core source. If you didn't compile it yourself you won't get any help here anyway.

someone share please

No.

  • Upvote 1
Link to comment
Share on other sites

Is it ok, if I get message


Processing Map 724

[################################################################]

Extracting GameObject models...Extracting World\Wmo\Band\Final_Stage.wmo

No such file.

Couldn't open RootWmo!!!

Done!


Extract V4.00 2012_02. Work complete. No errors.

during vmap4extractor? Will not miss anything?

Edited by chucky.black
Link to comment
Share on other sites

hello people. i've just compiled server on debian, but i have no client on server to extract vmaps...

vmaps from windows doesn't works..

Using DataDir /home/pro/trinity/server/

WORLD: VMap support included. LineOfSight:1, getHeight:1, indoorCheck:1 PetLOS:1

WORLD: VMap data directory is: /home/pro/trinity/server/vmaps

VMap file '/home/pro/trinity/server/vmaps/000.vmtree' is missing or points to wrong version of vmap file. R

edo vmaps with latest version of vmap_assembler.exe.

Correct *.map files not found in path '/home/pro/trinity/server/maps' or *.vmtree/*.vmtile files in '/home/

pro/trinity/server/vmaps'. Please place *.map/*.vmtree/*.vmtile files in appropriate directories or correct

the DataDir value in the worldserver.conf file.

got this error..

can someone share vmaps files for linux please?

3.3.5a client version

thanks

Link to comment
Share on other sites

Is it ok, if I get message


Processing Map 724

[################################################################]

Extracting GameObject models...Extracting World\Wmo\Band\Final_Stage.wmo

No such file.

Couldn't open RootWmo!!!

Done!


Extract V4.00 2012_02. Work complete. No errors.

during vmap4extractor? Will not miss anything?

You can ignore that message.

Indeed you can ignre it.

There is a Final_Stage.m2 that gets extracted but there is no corresponding .wmo. I even manually searched the MPQ files for it but it doesn't exist. The extractor did not miss anything.

Link to comment
Share on other sites

--- Canned message start ---

I would love to be able to just say: "Look in upper right hand corner of the forum, there is a button labeled SEARCH, please use it", but I don't think that will be enough therefore I present to you:

searchbuttonfordummieslsq1.jpg

Please read it cover to cover, and don't bother posting again until you do!

--- Canned message end ---

Link to comment
Share on other sites

I have compiled the vmap4assembler and vmap4extractor tools from source (I used the master branch) and when I run the makevmaps_simple.bat file it doesn't generate any vmaps and I get the following errors:


Extracting World\Wmo\Azeroth\Buildings\Gilneas\Gilneas_House_B_Closed.wmo

No such file.

Couldn't open RootWmo!!!

Extracting World\Wmo\Cataclysm\Tolvir\Tolvir_Central_Building_01.wmo

No such file.

Couldn't open RootWmo!!!

Extracting World\Wmo\Cataclysm\Tolvir\Tolvir_Central_Building_01_D.wmo

No such file.

Couldn't open RootWmo!!!

Extracting World\Wmo\Cataclysm\Tolvir\Tolvir_Central_Building_01_C.wmo

No such file.

Couldn't open RootWmo!!!

Extracting World\Wmo\Kalimdor\Lostisles\Goblinshipfinal.wmo

No such file.

Couldn't open RootWmo!!!

Extracting World\Wmo\Dungeon\Md_Mountaincave\Md_Mushroomcave06.wmo

No such file.

Couldn't open RootWmo!!!

Done!


E:\World of Warcraft>vmap4assembler.exe Buildings vmaps

using Buildings as source directory and writing output to vmaps

Could not read dir_bin file!

exit with errors

Is it be possible that the extractors from the Cataclysm branch may have been transfered into the master branch by mistake? If so this would explain why they don't work...

The only version of WoW installed on my computer is Wotlk 3.3.5a and I compiled the core and tools using the source from the master branch (https://github.com/TrinityCore/TrinityCore.git)

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By WalkerSh
      Friends,
      I am going through a big problem.
      all maps in "BFa" are completely empty. (without "mobs", without "Npc's".
      how can I enable world missions and all the content in "BFa".  ??????????????????????
      I looked everywhere on this subject, but I was unsuccessful.
      I apologize, I am a beginner in the projects.

      ====================================================================
      I am currently using this project. 8.3.0 (33369)
      http://www.ac-web.org/forums/showthread.php?237071-World
       
      updated to 8.3.7 (35662)
      https://mega.nz/file/0dpmla4Q#4tKwrc-G9uhyxCkJozNwZp8Pr0ArgZmwO-ay7OCMvGw
      Source project
      https://github.com/TrinityCore/TrinityCore

      ====================================================================
      My WorldServ.conf
      #    Expansion
      #        Description: Allow server to use content from expansions. Checks for expansion-related
      #                     map files, client compatibility and class/race character creation.
      #        Default:     7 - (Expansion 7)
      #                     6 - (Expansion 6)
      #                     5 - (Expansion 5)
      #                     4 - (Expansion 4)
      #                     3 - (Expansion 3)
      #                     2 - (Expansion 2)
      #                     1 - (Expansion 1)
      #                     0 - (Disabled, Ignore and disable expansion content (maps, races, classes)
      Expansion = 8
      #
    • By reyne
      Hey there!

      I've followed a few threads here about map extraction, and am still having issues. Originally, I was having the issue described here.
      After following the advice given in that thread (creating characters of both BC races and running around for a bit), I am no longer getting that error, however now I get the following error while trying to extract maps:

      `Error loading World\Maps\Expansion01\Expansion01_42_6.adt`

      This repeats for every line in Expansion01, and then the extractor crashes.

      I'm not sure where else to go from here.

      Thanks for your help

      Edit: I've created an 85 on an i85 server and flown all around Outland now, same issue.
    • By Ithylis
      =====[ English ]=====
      Hello,
      First of all I'm sorry if my english is not good, it's the use of Mr Google translation
      That's after years I restart in a WoW private server.
      I thank everyone who gives their time to help TrinityCore evolve.
      I appeal to the community because I can not find the dbc-cameras-vmaps-maps-mmaps-gt files of master 8.2.0.31478.
      I have the official version of the game in 8.2.5 and going through Arctium I do not have the data to extract all that, or else I get it wrong.
      Would anyone be kind enough to share all these extracted files please?
      Thank you very much and have a good day / night
      Regards,
      Ithylis
      =====[ Français ]=====
      Bonjour,

      Avant tout je suis désolé si mon anglais n'est pas bon, c'est l'utilisation de Monsieur Google traduction

      Voilà après des années je me relance dans un serveur privé WoW.
      Je remercie tout ceux qui donnent de leur temps pour faire évoluer TrinityCore.
      Je fais appel à la communauté, car je n'arrive pas à trouver les fichiers dbc-cameras-vmaps-maps-mmaps-gt de la version master 8.2.0.31478.
      J'ai la version officielle du jeu en 8.2.5 et en passant par Arctium je n'ai pas les données pour extraire tout cela, ou alors je m'y prends mal.

      Est-ce que quelqu'un aurait la bonté de partager tous ces fichiers extraits s'il vous plait ?

      Merci beaucoup et bonne journée/nuit
      Cordialement,
      Ithylis
    • By roweqharoji
      Hi guys, this is my first post for help. I think this may be a really noob problem, but I just can't...... Sorry first if there's any mistakes.
      I tried to host 4.3.4 from https://gitlab.com/trinitycore/TrinityCore_434, but with no luck I keep recieving error like The `spell_proc` table entry for spellIdXXX has Attribute PROC_ATTR_REQ_SPELLMOD, but spell has no spell mods. Proc will not be triggered. Detailed log is attached below.
      I have host 3.3.5 without error, but when it comes to 4.3.4, I just can't figure out how to solve this situation. I've tried searching for similar problem, but they said it's client side issue. like this https://gitlab.com/trinitycore/TrinityCore_434/issues/165. I tried download different client data such as wowmortal, atlantiss, mangos wowregeneration...and other two client. But no luck with those...
      If anyone can show me any hint, I would really appreciate
      DBErrors.log
    • By omgdior
      Hello user!  Help me please. How to extract the client DBC, Maps, VMaps & VMaps. I for some reason after 3.3.5 can not understand what to do in the new version. I hope for you.
×
×
  • Create New...