Compile or cmake problems

bury · September 10, 2014

Hello again!

I setup everything following your wiki guide, and apparently everything works without problems.

I setup EVERYTHING on my laptop, and i'm trying to play on my desktop computer. The realmlist in the db (on my laptop) is set as 127.0.0.1, and in my realmlist.wtf (on my desktop computer) is set as the local ip of my laptop (192.168.x.xx).

I created an account as test/test, and gave it gm level 3.

When I try to connect it it says: Correct, and it lets me choose the kingdom (named by default trinity) and when I click accept it says "accessing a game server" and it returns to the kingdom choosing. Its like I can't enter the kingdom.

Should I do everything else with the realmlist? I didnt receive any error while the server setup (compile, db, etc), and I extracted maps, dbc, vmaps and mmaps. Followed all steps one by one.

Thanks!

Edit: Ok, in my laptop works properly... dont know why it doesnt work in my desktop pc ¬¬

Edited September 10, 2014 by bury

Paradox · September 10, 2014

Did you remember to change the field in the auth.realmlist table?

bury · September 10, 2014

Did you remember to change the field in the auth.realmlist table?

Hello, that table was in 127.0.0.1, thought that changing my realmlist to the local net of my laptop, it would run properly but nope, I couldnt enter the kingdom.

What I did is put the public ip in the normal adress of tha table, and then the local ip of my laptop in the local adress and open the ports. Now it seems it works properly.

Your guide in the wiki is really well explained.

Thanks you!

Razhael · September 15, 2014

Hi,i just wasted whole day to try all solution that i found at google (and i still failed) so please can some one tell me how to fix Cmake generate problem with following information:
OS: Windows7 Ultimate SP1 x64
Cmake Version:3.0.2 (I just tried with 2.8.x before that and its the same)
Visual Studio Express 2013 with update 3 for Windows Desctop
Everything was fine until that lame .netflamework 4.5.1 update from windows that i reverted but the problem still exist and i have done too much changed to my OS to go to restore point.

Error that i get:
from CMake: http://pastebin.com/xTpGqBJv
Cmake Output: http://pastebin.com/kyvmeTQs
Cmake ErrorLog: http://pastebin.com/Wy2PZhZb

Steps i tried:
I tried Repair,Uninstalled and Installed again VS12,reinstalled .netflamework,reinstalledcmake,reinstalledgitextensions.
Nothing helped or made any change so far =[

Ascathor · September 15, 2014

Google said it could be a path too long, exceeding a certain amount of characters. I do not think it's that.

Can you link the entire path, maybe remove the ' within path. Worth a try, seems like the only actual characer out of place

WorldofRenegation · September 15, 2014

hello guys i am trying to run cmake but i recieve this error hopefully somone can help me

i compiled with the latest rev version from trinitycore


Determining if files pthread.h exist failed with the following output:
Change Dir: C:/TrinityCore/Build/CMakeFiles/CMakeTmp

Run Build Command:"C:/Program Files (x86)/MSBuild/12.0/bin/MSBuild.exe" "cmTryCompileExec2558042386.vcxproj" "/p:Configuration=Debug" "/p:VisualStudioVersion=12.0"
Microsoft (R) Build Engine version 12.0.21005.1

[Microsoft .NET Framework, version 4.0.30319.18444]

Copyright (C) Microsoft Corporation. All rights reserved.



Build started 9/9/2014 12:38:42 PM.

Project "C:TrinityCoreBuildCMakeFilesCMakeTmpcmTryCompileExec2558042386.vcxproj" on node 1 (default targets).

PrepareForBuild:

  Creating directory "cmTryCompileExec2558042386.dirDebug".

  Creating directory "C:TrinityCoreBuildCMakeFilesCMakeTmpDebug".

  Creating directory "cmTryCompileExec2558042386.dirDebugcmTryCom.82BE167A.tlog".

InitializeBuildStatus:

  Creating "cmTryCompileExec2558042386.dirDebugcmTryCom.82BE167A.tlogunsuccessfulbuild" because "AlwaysCreate" was specified.

ClCompile:

  C:Program Files (x86)Microsoft Visual Studio 12.0VCbinCL.exe /c /Zi /W3 /WX- /Od /Ob0 /Oy- /D WIN32 /D _WINDOWS /D _DEBUG /D "CMAKE_INTDIR="Debug"" /D _MBCS /Gm- /RTC1 /MDd /GS /fp:precise /Zc:wchar_t /Zc:forScope /Fo"cmTryCompileExec2558042386.dirDebug" /Fd"cmTryCompileExec2558042386.dirDebugvc120.pdb" /Gd /TC /wd4996 /wd4355 /wd4244 /wd4985 /wd4267 /wd4619 /wd4512 /analyze- /errorReport:queue CheckIncludeFiles.c

  Microsoft (R) C/C++ Optimizing Compiler Version 18.00.21005.1 for x86

  Copyright (C) Microsoft Corporation.  All rights reserved.

  

  cl /c /Zi /W3 /WX- /Od /Ob0 /Oy- /D WIN32 /D _WINDOWS /D _DEBUG /D "CMAKE_INTDIR="Debug"" /D _MBCS /Gm- /RTC1 /MDd /GS /fp:precise /Zc:wchar_t /Zc:forScope /Fo"cmTryCompileExec2558042386.dirDebug" /Fd"cmTryCompileExec2558042386.dirDebugvc120.pdb" /Gd /TC /wd4996 /wd4355 /wd4244 /wd4985 /wd4267 /wd4619 /wd4512 /analyze- /errorReport:queue CheckIncludeFiles.c

  

  CheckIncludeFiles.c

CheckIncludeFiles.c(2): fatal error C1083: Cannot open include file: 'pthread.h': No such file or directory [C:TrinityCoreBuildCMakeFilesCMakeTmpcmTryCompileExec2558042386.vcxproj]

Done Building Project "C:TrinityCoreBuildCMakeFilesCMakeTmpcmTryCompileExec2558042386.vcxproj" (default targets) -- FAILED.



Build FAILED.



"C:TrinityCoreBuildCMakeFilesCMakeTmpcmTryCompileExec2558042386.vcxproj" (default target) (1) ->

(ClCompile target) -> 

  CheckIncludeFiles.c(2): fatal error C1083: Cannot open include file: 'pthread.h': No such file or directory [C:TrinityCoreBuildCMakeFilesCMakeTmpcmTryCompileExec2558042386.vcxproj]



    0 Warning(s)

    1 Error(s)



Time Elapsed 00:00:00.88


Source:
/* */
#include <pthread.h>


int main(){return 0;}

Razhael · September 15, 2014

Google said it could be a path too long, exceeding a certain amount of characters. I do not think it's that.
Can you link the entire path, maybe remove the ' within path. Worth a try, seems like the only actual characer out of place

I just want to cut my veins right now >_< I cant believe that whole sunday is wasted i tried most of the solutions over google and finally it was just this...

Thank you!!! :3

elraro · September 15, 2014

hi! im getting problems with the make command.

[ 9%] Building CXX object src/server/shared/CMakeFiles/shared.dir/Configuration/Config.cpp.o

c++: internal compiler error: Segmentation fault (program cc1plus)
Please submit a full bug report,
with preprocessed source if appropriate.

make[2]: *** [src/server/shared/CMakeFiles/shared.dir/Configuration/Config.cpp.o] Error 4
make[1]: *** [src/server/shared/CMakeFiles/shared.dir/all] Error 2
make: *** [all] Error 2

Lastest revision.

Debian 7.6

OVH kernel with grsec.

Rev 38200f83606c

Edited September 15, 2014 by elraro

Nay · September 15, 2014

+elraro: that sounds like an issue where GCC is being killed because you are overusing system resources. Since you said "OVH kernel with grsec" I guess you need to increase the memory and/or cpu of the machine.

Edit: ignore what I said, see Aokrome's answer below

Aokromes · September 15, 2014

Some older OVH kernels used to crash TC's compilation i sugest you to try updating kernel or using standard kernel instead OVH's.

elraro · September 16, 2014

Yep, problem was the kernel.

Im compiling perfect now.

BTW isnt older kernel, its kernel 3.14

Edited September 16, 2014 by elraro

dragos14 · September 16, 2014

Hi guys. I am compiling 4.3.4 brach from trinitycore on debian. I have installed everythings that are needed to perform a compiling. When I use command "make" everything is fine but when the compiling arrive at "Linking CXX static library libscripts.a" or "Linking CXX executable worldserver" it takes like 2-3 hours to finish this steps. Same thing when I use "make install" .

It is not the first time when I compile. It used to compile fast and not stuck 2 hours on that Linking things .. but now I don't know why this problem" and when I use cmake I use just DWITH_COREDEBUG=1 and DWITH_WARNINGS=1

Nay · September 16, 2014

You likely do not need DWITH_COREDEBUG=1 and DWITH_WARNINGS=1, those two will likely slow down the compilation.

Linking needs a lot of I/O, are you sure that nothing bad happened with your hard drive?

Are you compiling with PCH enabled? You should.

Orangs · September 23, 2014

Greetins everyone,

today, im trying to compile fresh 4.3.4 core, but i have found one big problem in Compiling.

Look at this

-- Detected 64-bit platform
-- UNIX: Using jemalloc
-- UNIX: Using default configuration directory
-- UNIX: Using default library directory
-- UNIX: Configuring uninstall target
-- UNIX: Created uninstall target
-- UNIX: Detected compiler: /usr/bin/cc
CMake Error at cmake/compiler/gcc/settings.cmake:7 (message):
  GCC: TrinityCore requires version 4.7.2 to build but found 4.4.5
Call Stack (most recent call first):
  cmake/platform/unix/settings.cmake:37 (include)
  cmake/macros/CheckPlatform.cmake:15 (include)
  CMakeLists.txt:51 (include)


-- Configuring incomplete, errors occurred!
root@DarkDream:/home/development/TrinityCore/build#

Core revision

c695c084b8

I have this gcc version

gcc version 4.4.5 (Debian 4.4.5-8)

Some next informations

root@DarkDream:/home/development/TrinityCore/build# uname -a
Linux DarkDream 2.6.32-wvg-hosting #1 SMP Fri May 24 10:05:54 CEST 2013 x86_64 GNU/Linux

I must have 4.7.2 version,but i cant update/upgrade it! Someone can please help me? I dont know how to fix this problem and a lot of links on Google doesnt help me. Thanks anybody for help or idea how to upgrade GCC.

Have a good rest of the day

Aokromes · September 23, 2014

Like you said, you need gcc 4.7, update your ancient linux to debian 7 or similar modern linux, because for sure you will lack other requirements.

Dnel · September 29, 2014

This afternoon, CMake showed this Warning:

WARNING: Target "authserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "authserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "authserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "authserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "worldserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "worldserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "worldserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.
WARNING: Target "worldserver" requests linking to directory "C:/mysql_lib/include".  Targets may link only to libraries.  CMake is dropping the item.

I follow step by step all. I asked my friends, etc.

Later of this warnings, on Visual studio 12 x64 (latest version) show me 106 errors about this line: include <mysql.h>

What could I do?

Thanks for all

Edited September 29, 2014 by Dnel

Nay · September 29, 2014

+Dnel: these are my values: MYSQL_INCLUDE_DIR=C:Program FilesMySQLMySQL Server 5.5/include

and MYSQL_LIBRARY=C:Program FilesMySQLMySQL Server 5.5liblibmysqld.lib (64 bits)

Dnel · September 30, 2014

+Dnel: these are my values: MYSQL_INCLUDE_DIR=C:Program FilesMySQLMySQL Server 5.5/include

and MYSQL_LIBRARY=C:Program FilesMySQLMySQL Server 5.5liblibmysqld.lib (64 bits)

Generating done

Fix with this values:

MYSQL_INCLUDE_DIR = C:/mysql_lib/include
MYSQL_LIBRARY = C:/mysql_lib/lib_64/mysqld.lib

Thanks you Nay

Edited September 30, 2014 by Dnel

Basurci · September 30, 2014

Like you said, you need gcc 4.7, update your ancient linux to debian 7 or similar modern linux, because for sure you will lack other requirements.

Hello, I'm having same issue but i'm using latest libraries. Here's error :

cmake -DCMAKE_BUILD_TYPE=release -DCMAKE_INSTALL_PREFIX=../build && make && make install
-- The C compiler identification is GNU 4.7.2
-- The CXX compiler identification is GNU 4.7.2
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detected 64-bit platform
-- UNIX: Using jemalloc
-- UNIX: Using default configuration directory
-- UNIX: Using default library directory
CMake Error at cmake/platform/unix/settings.cmake:22 (configure_file):
  configure_file attempted to configure a file:
  /home/wow/server_core/cmake_uninstall.cmake into a source directory.
Call Stack (most recent call first):
  cmake/macros/CheckPlatform.cmake:15 (include)
  CMakeLists.txt:51 (include)


-- Configuring incomplete, errors occurred!

I did what instructions said for those who are doing this first time but as you see i failed :S

Help?

Aokromes · September 30, 2014

No you don't have do, and it's not same error, you are trying to compile into souces directory. You must create a directory, for example build, enter there and run cmake from there.

Basurci · September 30, 2014

No you don't have do, and it's not same error, you are trying to compile into souces directory. You must create a directory, for example build, enter there and run cmake from there.

Still getting same/similar error :

wow@wow:~/build$  cmake ../server_core -DCMAKE_BUILD_TYPE=release -DCMAKE_INSTALL_PREFIX=../build && make && make install
-- Detected 64-bit platform
-- UNIX: Using jemalloc
-- UNIX: Using default configuration directory
-- UNIX: Using default library directory
CMake Error at cmake/platform/unix/settings.cmake:22 (configure_file):
  configure_file attempted to configure a file:
  /home/wow/server_core/cmake_uninstall.cmake into a source directory.
Call Stack (most recent call first):
  cmake/macros/CheckPlatform.cmake:15 (include)
  CMakeLists.txt:51 (include)


-- Configuring incomplete, errors occurred!

I'm using " cmake -DCMAKE_BUILD_TYPE=release -DCMAKE_INSTALL_PREFIX=../build && make && make install " line to compile, source files are located in server_core folder and as u said i made build folder.

narnak · October 1, 2014

Hello

guys can some 1 plz try to help me with this problem i have

i get Use MySQL sourcetree : No this is why i get lot of mysql error when compiling i think this need to be on Use MySQL sourcetree: Yes (default) something like this i have latest MySQL 5.6.21 installed do i need to download TDB or something?

under task manager MYSQL56 Runing

ty

The C compiler identification is MSVC 18.0.30723.0

The CXX compiler identification is MSVC 18.0.30723.0

Check for working C compiler using: Visual Studio 12

Check for working C compiler using: Visual Studio 12 -- works

Detecting C compiler ABI info

Detecting C compiler ABI info - done

Check for working CXX compiler using: Visual Studio 12

Check for working CXX compiler using: Visual Studio 12 -- works

Detecting CXX compiler ABI info

Detecting CXX compiler ABI info - done

Detected 32-bit platform

MSVC: Enabled large address awareness

MSVC: Enabled SSE2 support

MSVC: Disabled Safe Exception Handlers for debug builds

MSVC: Overloaded standard names

MSVC: Disabled NON-SECURE warnings

MSVC: Disabled POSIX warnings

MSVC: Disabled generic compiletime warnings

Found OpenSSL library: optimized;C:/OpenSSL-Win32/lib/VC/ssleay32MD.lib;C:/OpenSSL-Win32/lib/VC/libeay32MD.lib;debug;C:/OpenSSL-Win32/lib/VC/ssleay32MDd.lib;C:/OpenSSL-Win32/lib/VC/libeay32MDd.lib

Found OpenSSL headers: C:/OpenSSL-Win32/include

Looking for include file pthread.h

Looking for include file pthread.h - not found

Found Threads: TRUE

Boost version: 1.55.0

Found the following Boost libraries:

system

thread

program_options

Found MySQL library: C:/Program Files (x86)/MySQL/MySQL Server 5.5/lib/libmysql.lib

Found MySQL headers: C:/Program Files (x86)/MySQL/MySQL Server 5.5/include

Found git binary : C:/Program Files (x86)/Git/cmd/git.exe

* TrinityCore revision : 4ed3254aa84a 2014-09-29 20:12:03 +0200 (master branch)

* Install core to : C:/Program Files (x86)/TrinityCore

* Build world/auth : Yes (default)

* Build with scripts : Yes (default)

* Build map/vmap tools : No (default)

* Build core w/PCH : Yes (default)

* Build scripts w/PCH : Yes (default)

* Show compile-warnings : No (default)

* Use coreside debug : No (default)

* Use MySQL sourcetree : No

* Use GIT revision hash : Yes

SCRIPT PREPARATIONS

-> Prepared: Spells

-> Prepared: Commands

-> Prepared: Custom

-> Prepared: World

-> Prepared: Outdoor PVP Zones

-> Prepared: Eastern Kingdoms

-> Prepared: Kalimdor

-> Prepared: Outland

-> Prepared: Northrend

-> Prepared: Events

-> Prepared: Pet

SCRIPT PREPARATION COMPLETE

Configuring done

Edited October 1, 2014 by narnak

Aokromes · October 1, 2014

You are trying to put the binaries inside the build directory....

create build directory inside server_core then cmake ../ -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX=/path/where/you/wanna/have/server/installed (not build directory).

Aokromes · October 1, 2014

@narnak read:

I can't compile TC under Windows. i get:

Could not find the MySQL libraries! Please install the development

libraries and headers

MySQL sources have been removed from the repository.

Like OpenSSL, you need to set MYSQL_LIBRARY and MYSQL_INCLUDE_DIR to where you have mysql installed.

In my case, it's LIB=C:mysqlliblibmysqld.lib and INCLUDE_DIR=C:mysqlinclude

or http://collab.kpsn.org/display/tc/TrinityCore+Requirements#TrinityCoreRequirements-Windows

mserkanoz · October 6, 2014

This is the command I use:


cmake ../ -DPREFIX=/home/`echo $USER`/server -DTOOLS=1

This is the output:

-- Found Threads: TRUE
CMake Error at cmake/macros/FindBoost.cmake:1115 (message):
  Unable to find the requested Boost libraries.

  Unable to find the Boost header files.  Please set BOOST_ROOT to the root
 directory containing Boost or BOOST_INCLUDEDIR to the directory containing
  Boost's headers.
Call Stack (most recent call first):
  cmake/macros/ConfigureBoost.cmake:28 (find_package)
  CMakeLists.txt:60 (include)

I am using Ubuntu 14 x64 on VPS. I don't think this becuase of 64bit systems, I also tried on 32bit version as well. So, what should I do?

Sign In

Compile or cmake problems

Recommended Posts

Link to comment

Share on other sites

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Recently Browsing 0 members