CFGhost

Stuck at connected / infinite loop / login issues / battle.net

561 posts in this topic

EDIT: There i fixed it for the Developer, somehow i was advertising.. I notice why though, because it included my servers name. My bad...

 

Hey guys i recently migrated a new dedicated server from a VPS so i can continue working on something and i have ran into a snag... The server is running fine, it loads up super fast, but whenever someone tries to login it gets stuck at "Connected" after you select the realm, what could possibly cause this issue?

 

Configs:

 

Authconfig

http://pastebin.com/aiBE2jvC <- World Config, too big to put on AC-Web

 

An image to represent the issue :/

Hope some of you can help. Thanks! Will reward +rep to anyone who posts some useful information.

0

Share this post


Link to post
Share on other sites

Check if you got ports open on the servers router (3724 and 8085 default).

I assume you already have set the correct ip adress in realmlist table - auth database and same ip in realmlist.wtf. If you got a DNS you should use that instead of the IP on both of these locations.

2

Share this post


Link to post
Share on other sites

Those ports are open when Trinity Core is running, but when it isn't they are not open... is that a bad sign? It is a legitimate dedicated, so there should be no need to open ports, correct?

I also get this error, now that i changed to a DNS.

61a9c752d81146b96f046f59d201aff5.jpg

Edited by CFGhost
0

Share this post


Link to post
Share on other sites

Those ports are open when Trinity Core is running, but when it isn't they are not open... is that a bad sign? It is a legitimate dedicated, so there should be no need to open ports, correct?

I also get this error, now that i changed to a DNS.

61a9c752d81146b96f046f59d201aff5.jpg

Image is broken

Did you edit the realm IP address in the auth database?

0

Share this post


Link to post
Share on other sites

Its not broken for me, and yes i did. It says unable to connect to realm server

0

Share this post


Link to post
Share on other sites

I wonder if it's wise to have complete and actual screenshot of the client posted here...

Back to topic, these realm loop issue is old and been discussed so many time..

and list the content of your realmlist table here

0

Share this post


Link to post
Share on other sites

--- Canned message start

It appears the issue in the original post was solved, so this thread shall be closed. Should you encounter any other difficulties, please open a new thread.

--- Canned message end ---

0

Share this post


Link to post
Share on other sites

hi, i have a problem with connecting from outside, i open the ports 8085, and 3724.

I can connect from localhost realmlist but my friend can't connect from outside (external ip previously configured in the db).

He typed correct acc id and pass, and enter. Then, a window appeared that said "connected to server". Then the window said "authenticating" and remained stuck.

help please.

0

Share this post


Link to post
Share on other sites

Need more info, If your friend gets to the "authenticating window" then it sounds like he was able to get to the authserver. (not 100% on that)

However, this is an issue with your router and/or your firewall preventing players from going though the port(s).

Check that you have the external IP resolved in your router, your external IP in the realmlist DB is fine. Also check the ports in your firewall, which should only be 8085, and 3724 and nothing else unless you are hosting a website and/or other junk like mail.

BTW anyone else reading this post should have thier firewall enabled. I read that a ton of people disable it. (not sure why)

I have had over 400 people connect with my firewall on just fine.

0

Share this post


Link to post
Share on other sites

my authserver.conf

###############################################

# Trinity Core Auth Server configuration file #

###############################################

[authserver]

###################################################################################################

# SECTION INDEX

#

# EXAMPLE CONFIG

# AUTH SERVER SETTINGS

# MYSQL SETTINGS

#

###################################################################################################

###################################################################################################

# EXAMPLE CONFIG

#

# Variable

# Description: Brief description what the variable is doing.

# Important: Annotation for important things about this variable.

# Example: "Example, i.e. if the value is a string"

# Default: 10 - (Enabled|Comment|Variable name in case of grouped config options)

# 0 - (Disabled|Comment|Variable name in case of grouped config options)

#

# Note to developers:

# - Copy this example to keep the formatting.

# - Line breaks should be at column 100.

###################################################################################################

###################################################################################################

# AUTH SERVER SETTINGS

#

# LogsDir

# Description: Logs directory setting.

# Important: LogsDir needs to be quoted, as the string might contain space characters.

# Logs directory must exists, or log file creation will be disabled.

# Default: "" - (Log files will be stored in the current path)

LogsDir = ""

#

# MaxPingTime

# Description: Time (in minutes) between database pings.

# Default: 30

MaxPingTime = 30

#

# RealmServerPort

# Description: TCP port to reach the auth server.

# Default: 3724

RealmServerPort = 3724

#

#

# BindIP

# Description: Bind auth server to IP/hostname

# Default: "0.0.0.0" - (Bind to all IPs on the system)

BindIP = "0.0.0.0"

#

# PidFile

# Description: Auth server PID file.

# Example: "./authserver.pid" - (Enabled)

# Default: "" - (Disabled)

PidFile = ""

#

# LogLevel

# Description: Server console level of logging

# Default: 0 - (Minimum)

# 1 - (Basic)

# 2 - (Detail)

# 3 - (Full/Debug)

LogLevel = 0

#

# LogFile

# Description: Log file for main server log.

# Default: "Auth.log" - (Enabled)

# "" - (Disabled)

LogFile = "Auth.log"

#

# Debug Log Mask

# Description: Bitmask that determines which debug log output (level 3)

# will be logged.

# Possible flags:

#

# 64 - Anything related to network input/output,

# such as packet handlers and netcode logs

#

# Simply add the values together to create a bitmask.

# For more info see enum DebugLogFilters in Log.h

#

# Default: 0 (nothing)

DebugLogMask = 64

#

# SQLDriverLogFile

# Description: Log file for SQL driver events.

# Example: "SQLDriver.log" - (Enabled)

# Default: "" - (Disabled)

SQLDriverLogFile = ""

#

# LogTimestamp

# Description: Append timestamp to the server log file name.

# Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogTimestamp = 0

#

# LogFileLevel

# Description: Server file level of logging

# Default: 0 - (Minimum)

# 1 - (Basic)

# 2 - (Detail)

# 3 - (Full/Debug)

LogFileLevel = 0

#

# LogColors

# Description: Colors for log messages (Format: "normal basic detail debug").

# Colors: 0 - Black

# 1 - Red

# 2 - Green

# 3 - Brown

# 4 - Blue

# 5 - Magenta

# 6 - Cyan

# 7 - Grey

# 8 - Yellow

# 9 - Lred

# 10 - Lgreen

# 11 - Lblue

# 12 - Lmagenta

# 13 - Lcyan

# 14 - White

# Example: "13 11 9 5" - (Enabled)

# Default: "" - (Disabled)

LogColors = ""

#

# EnableLogDB

# Description: Write log messages to database (LogDatabaseInfo).

# Default: 0 - (Disabled)

# 1 - (Enabled)

EnableLogDB = 0

#

# DBLogLevel

# Description: Log level of databases logging.

# Default: 1 - (Basic)

# 0 - (Minimum)

# 2 - (Detail)

# 3 - (Full/Debug)

DBLogLevel = 1

#

# UseProcessors

# Description: Processors mask for Windows based multi-processor systems.

# Default: 0 - (Selected by OS)

# 1+ - (Bit mask value of selected processors)

UseProcessors = 0

#

# ProcessPriority

# Description: Process priority setting for Windows based systems.

# Default: 1 - (High)

# 0 - (Normal)

ProcessPriority = 1

#

# RealmsStateUpdateDelay

# Description: Time (in seconds) between realm list updates.

# Default: 20 - (Enabled)

# 0 - (Disabled)

RealmsStateUpdateDelay = 20

#

# WrongPass.MaxCount

# Description: Number of login attemps with wrong password before the account or IP will be

# banned.

# Default: 0 - (Disabled)

# 1+ - (Enabled)

WrongPass.MaxCount = 0

#

# WrongPass.BanTime

# Description: Time (in seconds) for banning account or IP for invalid login attempts.

# Default: 600 - (10 minutes)

# 0 - (Permanent ban)

WrongPass.BanTime = 600

#

# WrongPass.BanType

# Description: Ban type for invalid login attempts.

# Default: 0 - (Ban IP)

# 1 - (Ban Account)

WrongPass.BanType = 0

#

###################################################################################################

###################################################################################################

# MYSQL SETTINGS

#

# LoginDatabaseInfo

# Description: Database connection settings for the realm server.

# Example: "hostname;port;username;password;database"

# ".;somenumber;username;password;database" - (Use named pipes on Windows

# "enable-named-pipe" to [mysqld]

# section my.ini)

# ".;/path/to/unix_socket;username;password;database" - (use Unix sockets on

# Unix/Linux)

# Default: "127.0.0.1;3306;trinity;trinity;auth"

LoginDatabaseInfo = "127.0.0.1;3306;root;password;auth"

#

# LoginDatabase.WorkerThreads

# Description: The amount of worker threads spawned to handle asynchronous (delayed) MySQL

# statements. Each worker thread is mirrored with its own connection to the

# Default: 1

LoginDatabase.WorkerThreads = 1

#

###################################################################################################

my worldserver.conf

################################################

# Trinity Core World Server configuration file #

################################################

[worldserver]

###################################################################################################

# SECTION INDEX

#

# EXAMPLE CONFIG

# CONNECTIONS AND DIRECTORIES

# PERFORMANCE SETTINGS

# SERVER LOGGING

# SERVER SETTINGS

# PLAYER INTERACTION

# CREATURE SETTINGS

# CHAT SETTINGS

# GAME MASTER SETTINGS

# VISIBILITY AND DISTANCES

# SERVER RATES

# AUTO BROADCAST

# BATTLEGROUND CONFIG

# ARENA CONFIG

# NETWORK CONFIG

# CONSOLE AND REMOTE ACCESS

# CHARACTER DELETE OPTIONS

# CUSTOM SERVER OPTIONS

#

###################################################################################################

###################################################################################################

# EXAMPLE CONFIG

#

# Variable

# Description: Brief description what the variable is doing.

# Important: Annotation for important things about this variable.

# Example: "Example, i.e. if the value is a string"

# Default: 10 - (Enabled|Comment|Variable name in case of grouped config options)

# 0 - (Disabled|Comment|Variable name in case of grouped config options)

#

# Note to developers:

# - Copy this example to keep the formatting.

# - Line breaks should be at column 100.

###################################################################################################

###################################################################################################

# CONNECTIONS AND DIRECTORIES

#

# RealmID

# Description: ID of the Realm using this config.

# Important: RealmID must match the realmlist inside the realmd database.

# Default: 1

RealmID = 1

#

# DataDir

# Description: Data directory setting.

# Important: DataDir needs to be quoted, as the string might contain space characters.

# Example: "@prefix@/share/trinitycore"

# Default: "."

DataDir = "."

#

# LogsDir

# Description: Logs directory setting.

# Important: LogsDir needs to be quoted, as the string might contain space characters.

# Logs directory must exists, or log file creation will be disabled.

# Default: "" - (Log files will be stored in the current path)

LogsDir = ""

#

# LoginDatabaseInfo

# WorldDatabaseInfo

# CharacterDatabaseInfo

# Description: Database connection settings for the world server.

# Example: "hostname;port;username;password;database"

# ".;somenumber;username;password;database" - (Use named pipes on Windows

# "enable-named-pipe" to [mysqld]

# section my.ini)

# ".;/path/to/unix_socket;username;password;database" - (use Unix sockets on

# Unix/Linux)

# Default: "127.0.0.1;3306;trinity;trinity;auth" - (LoginDatabaseInfo)

# "127.0.0.1;3306;trinity;trinity;world" - (WorldDatabaseInfo)

# "127.0.0.1;3306;trinity;trinity;characters" - (CharacterDatabaseInfo)

LoginDatabaseInfo = "127.0.0.1;3306;root;password;auth"

WorldDatabaseInfo = "127.0.0.1;3306;root;password;world"

CharacterDatabaseInfo = "127.0.0.1;3306;root;password;characters"

#

# LoginDatabase.WorkerThreads

# WorldDatabase.WorkerThreads

# CharacterDatabase.WorkerThreads

# Description: The amount of worker threads spawned to handle asynchronous (delayed) MySQL

# statements. Each worker thread is mirrored with its own connection to the

# MySQL server and their own thread on the MySQL server.

# Default: 1 - (LoginDatabase.WorkerThreads)

# 1 - (WorldDatabase.WorkerThreads)

# 1 - (CharacterDatabase.WorkerThreads)

LoginDatabase.WorkerThreads = 1

WorldDatabase.WorkerThreads = 1

CharacterDatabase.WorkerThreads = 1

#

# LoginDatabase.SynchThreads

# WorldDatabase.SynchThreads

# CharacterDatabase.SynchThreads

# Description: The amount of MySQL connections spawned to handle.

# Default: 1 - (LoginDatabase.WorkerThreads)

# 1 - (WorldDatabase.WorkerThreads)

# 2 - (CharacterDatabase.WorkerThreads)

LoginDatabase.SynchThreads = 1

WorldDatabase.SynchThreads = 1

CharacterDatabase.SynchThreads = 2

#

# MaxPingTime

# Description: Time (in minutes) between database pings.

# Default: 30

MaxPingTime = 30

#

# WorldServerPort

# Description: TCP port to reach the world server.

# Default: 8085

WorldServerPort = 8085

#

# BindIP

# Description: Bind world server to IP/hostname

# Default: "0.0.0.0" - (Bind to all IPs on the system)

BindIP = "0.0.0.0"

#

###################################################################################################

###################################################################################################

# PERFORMANCE SETTINGS

#

# UseProcessors

# Description: Processors mask for Windows based multi-processor systems.

# Default: 0 - (Selected by OS)

# 1+ - (Bit mask value of selected processors)

UseProcessors = 0

#

# ProcessPriority

# Description: Process priority setting for Windows based systems.

# Default: 1 - (High)

# 0 - (Normal)

ProcessPriority = 1

#

# Compression

# Description: Compression level for client update packages

# Range: 1-9

# Default: 1 - (Speed)

# 9 - (Best compression)

Compression = 1

#

# PlayerLimit

# Description: Maximum number of players in the world. Excluding Mods, GMs and Admins.

# Important: If you want to block players and only allow Mods, GMs or Admins to join the

# server, use the DB field "realmd.realmlist.allowedSecurityLevel".

# Default: 100 - (Enabled)

# 1+ - (Enabled)

# 0 - (Disabled, No limit)

PlayerLimit = 100

#

# SaveRespawnTimeImmediately

# Description: Save respawn time for creatures at death and gameobjects at use/open.

# Default: 1 - (Enabled, Save respawn time immediately)

# 0 - (Disabled, Save respawn time at grid unloading)

SaveRespawnTimeImmediately = 1

#

# MaxOverspeedPings

# Description: Maximum overspeed ping count before character is disconnected.

# Default: 2 - (Enabled, Minimum value)

# 3+ - (Enabled, More checks before kick)

# 0 - (Disabled)

MaxOverspeedPings = 2

#

# GridUnload

# Description: Unload grids to save memory. Can be disabled if enough memory is available

# to speed up moving players to new grids.

# Default: 1 - (enable, Unload grids)

# 0 - (disable, Do not unload grids)

GridUnload = 1

#

# SocketTimeOutTime

# Description: Time (in milliseconds) after which a connection being idle on the character

# selection screen is disconnected.

# Default: 900000 - (15 minutes)

SocketTimeOutTime = 900000

#

# SessionAddDelay

# Description: Time (in microseconds) that a network thread will sleep after authentication

# protocol handling before adding a connection to the world session map.

# Default: 10000 - (10 milliseconds, 0.01 second)

SessionAddDelay = 10000

#

# GridCleanUpDelay

# Description: Time (in milliseconds) grid clean up delay.

# Default: 300000 - (5 minutes)

GridCleanUpDelay = 300000

#

# MapUpdateInterval

# Description: Time (milliseconds) for map update interval.

# Default: 100 - (0.1 second)

MapUpdateInterval = 100

#

# ChangeWeatherInterval

# Description: Time (in milliseconds) for weather update interval.

# Default: 600000 - (10 min)

ChangeWeatherInterval = 600000

#

# PlayerSaveInterval

# Description: Time (in milliseconds) for player save interval.

# Default: 900000 - (15 min)

PlayerSaveInterval = 900000

#

# PlayerSave.Stats.MinLevel

# Description: Minimum level for saving character stats in the database for external usage.

# Default: 0 - (Disabled, Do not save character stats)

# 1+ - (Enabled, Level beyond which character stats are saved)

PlayerSave.Stats.MinLevel = 0

#

# PlayerSave.Stats.SaveOnlyOnLogout

# Description: Save player stats only on logout.

# Default: 1 - (Enabled, Only save on logout)

# 0 - (Disabled, Save on every player save)

PlayerSave.Stats.SaveOnlyOnLogout = 1

#

# vmap.enableLOS

# vmap.enableHeight

# Description: VMmap support for line of sight and height calculation.

# Default: 1 - (Enabled, vmap.enableLOS)

# 1 - (Enabled, vmap.enableHeight)

# 0 - (Disabled)

vmap.enableLOS = 1

vmap.enableHeight = 1

#

# vmap.ignoreSpellIds

# Description: These spells are ignored for LoS calculation.

# List of ids with delimiter ','.

# Example: "7720,1337"

# Default: "7720"

vmap.ignoreSpellIds = "7720"

#

# vmap.petLOS

# Description: Check line of sight for pets, to avoid them attacking through walls.

# Default: 1 - (Enabled, each pet attack will be checked for line of sight)

# 0 - (Disabled, somewhat less CPU usage)

vmap.petLOS = 1

#

# vmap.enableIndoorCheck

# Description: VMap based indoor check to remove outdoor-only auras (mounts etc.).

# Default: 1 - (Enabled)

# 0 - (Disabled, somewhat less CPU usage)

vmap.enableIndoorCheck = 1

#

# DetectPosCollision

# Description: Check final move position, summon position, etc for visible collision with

# other objects or walls (walls only if vmaps are enabled).

# Default: 1 - (Enabled)

# 0 - (Disabled, Less position precision but less CPU usage)

DetectPosCollision = 1

#

# TargetPosRecalculateRange

# Description: Max distance from movement target point (+moving unit size) and targeted

# object (+size) after that new target movement point calculated.

# Range: 0.5-5.0

# Default: 1.5

# 0.5 - (Minimum, Contact Range, More sensitive reaction to target movement)

# 5.0 - (Maximum, Melee attack range, Less CPU usage)

TargetPosRecalculateRange = 1.5

#

# UpdateUptimeInterval

# Description: Update realm uptime period (in minutes).

# Default: 10 - (10 minutes)

# 1+

UpdateUptimeInterval = 10

#

# LogDB.Opt.ClearInterval

# Description: Time (in minutes) for the WUPDATE_CLEANDB timer that clears the `logs` table

# of old entries.

# Default: 10 - (10 minutes)

# 1+

LogDB.Opt.ClearInterval = 10

#

# LogDB.Opt.ClearTime

# Description: Time (in seconds) for keeping old `logs` table entries.

# Default: 1209600 - (Enabled, 14 days)

# 0 - (Disabled, Do not clear entries)

LogDB.Opt.ClearTime = 1209600

#

# MaxCoreStuckTime

# Description: Time (in seconds) before the server is forced to crash if it is frozen.

# Default: 0 - (Disabled)

# 10+ - (Enabled, Recommended 10+)

MaxCoreStuckTime = 0

#

# AddonChannel

# Description: Configure the use of the addon channel through the server (some client side

# addons will not work correctly with disabled addon channel)

# Default: 1 - (Enabled)

# 0 - (Disabled)

AddonChannel = 1

#

# MapUpdate.Threads

# Description: Number of threads to update maps.

# Default: 1

MapUpdate.Threads = 1

#

# CleanCharacterDB

# Description: Clean out deprecated achievements, skills, spells and talents from the db.

# Default: 0 - (Disabled)

# 1 - (Enable)

CleanCharacterDB = 0

#

# PersistentCharacterCleanFlags

# Description: Determines the character clean flags that remain set after cleanups.

# This is a bitmask value, check /doc/CharacterDBCleanup.txt for more

# information.

# Example: 14 - (Cleaning up skills, talents and spells will remain enabled after the

# next cleanup)

# Default: 0 - (All cleanup methods will be disabled after the next cleanup)

PersistentCharacterCleanFlags = 0

#

###################################################################################################

###################################################################################################

# SERVER LOGGING

#

# PidFile

# Description: World daemon PID file

# Example: "./worldd.pid" - (Enabled)

# Default: "" - (Disabled)

PidFile = ""

#

# LogLevel

# Description: Server console level of logging

# Default: 1 - (Basic)

# 0 - (Minimum)

# 2 - (Detail)

# 3 - (Full/Debug)

LogLevel = 1

#

# LogFile

# Description: Log file for main server log.

# Default: "Server.log" - (Enabled)

# "" - (Disabled)

LogFile = "Server.log"

#

# LogTimestamp

# Description: Append timestamp to the server log file name.

# Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogTimestamp = 0

#

# LogFileLevel

# Description: Server file level of logging

# Default: 0 - (Minimum)

# 1 - (Basic)

# 2 - (Detail)

# 3 - (Full/Debug)

LogFileLevel = 0

#

# Debug Log Mask

# Description: Bitmask that determines which debug log output (level 3)

# will be logged.

# Possible flags:

# 1 - Anything related to units that doesn't fit in other

# categories.

# 2 - Anything related to pets.

# 4 - Anything related to vehicles.

# 8 - Anything related to C++ AI, instance scripts, etc.

# 16 - Anything related to DB AI, such as SAI, EAI, CreatureAI

# 32 - Anything related to DB map scripts

# 64 - Anything related to network input/output,

# such as packet handlers and netcode logs

# 128 - Anything related to the spellsystem and aurasystem

# 256 - Anything related to the achievement system

# 512 - Anything related to the condition system

# 1024 - Anything related to the pool system

# 2048 - Anything related to the auction house

# 4096 - Anything related to arena's and battlegrounds

# 8192 - Anything related to outdoor PVP

# 16384 - Anything related to the chat system

# 32768 - Anything related to the LFG system

# 65536 - Anything related to maps, instances (not scripts),

# grids, cells, visibility, etc.

# 131072 - Anything related to player loading from DB

# (Player::_LoadXXX functions)

# 262144 - Anything related to items

# 524288 - Anything related to player skills

# (do not confuse with spells)

# 1048576 - Anything related to loot

# 2097152 - Anything related to guilds

# 4194304 - Anything related to transports

#

# Simply add the values together to create a bitmask.

# For more info see enum DebugLogFilters in Log.h

#

# Default: 0 (nothing)

DebugLogMask = 0

#

# WorldLogFile

# Description: Packet logging file for the world server.

# Example: "World.log" - (Enabled)

# Default: "" - (Disabled)

WorldLogFile = ""

#

# DBErrorLogFile

# Description: Log file for database errors.

# Default: "DBErrors.log" - (Enabled)

# "" - (Disabled)

DBErrorLogFile = "DBErrors.log"

#

# CharLogFile

# Description: Log file for character operations

# Default: "Char.log" - (Enabled)

# "" - (Disabled)

CharLogFile = "Char.log"

#

# CharLogTimestamp

# Description: Append timestamp to the character log file name.

# Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext

# Default: 0 - (Disabled)

# 1 - (Enabled)

CharLogTimestamp = 0

#

# CharLogDump

# Description: Write a character dump in the CharLogFile before deleting it.

# For restoration, copy character data from log file starting from

# line == START DUMP == to line == END DUMP == (exclusive)

# and load it using the "pdump load" command.

# Default: 0 - (Disabled)

# 1 - (Enabled)

CharLogDump = 0

#

# CharLogDump.Separate

# Description: Write character dump to separate files files rather than adding it to the

# CharLogFile.

# Default: 0 - (Disabled)

# 1 - (Enabled)

CharLogDump.Separate = 0

#

# CharLogDump.SeparateDir

# Description: Write dump files into the sub folder within the log folder.

# Example: "chardumps" - (Enabled)

# Default: "" - (Disabled)

CharLogDump.SeparateDir = ""

#

# GmLogFile

# Description: Log file for gamemaster commands.

# Default: "GM.log" - (Enabled)

# "" - (Disabled)

GmLogFile = "GM.log"

#

# GmLogTimestamp

# Description: Append timestamp to the gamemaster log file name.

# Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext

# Default: 0 - (Disabled)

# 1 - (Enabled)

GmLogTimestamp = 0

#

# GmLogPerAccount

# Description: Create a log file per gamemaster account.

# Important: Logs not created if GmLogFile is not set.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GmLogPerAccount = 0

#

# RaLogFile

# Description: Log file for Remote Access commands.

# Default: "RA.log" - (Enabled)

# "" - (Disabled)

RaLogFile = "RA.log"

#

# ArenaLogFile

# Description: Log file for arena fights and arena team creations.

# Example: "Arena.log" - (Enabled)

# Default: "" - (Disabled)

ArenaLogFile = ""

#

# ArenaLog.ExtendedInfo

# Description: Include extended info to ArenaLogFile for each player after rated arena

# matches (guid, name, team, IP, healing/damage done, killing blows).

# Default: 0 - (Disabled)

# 1 - (Enabled)

ArenaLog.ExtendedInfo = 0

#

# SQLDeveloperLogFile

# Description: Log file for core-generated SQL queries/dumps

# Example: "SQLDev.log" - (Enabled)

# Default: "" - (Disabled)

SQLDeveloperLogFile = ""

#

# SQLDriverLogFile

# Description: Log file for SQL driver events.

# Example: "SQLDriver.log" - (Enabled)

# Default: "" - (Disabled)

SQLDriverLogFile = ""

#

# SQLDriverQueryLogging

# Description: Log SQL queries to the SQLDriverLogFile and console.

# Default: 0 - (Disabled, Query errors only)

# 1 - (Enabled, Full query logging - may have performance impact)

SQLDriverQueryLogging = 0

#

# LogColors

# Description: Colors for log messages (Format: "normal basic detail debug").

# Colors: 0 - Black

# 1 - Red

# 2 - Green

# 3 - Brown

# 4 - Blue

# 5 - Magenta

# 6 - Cyan

# 7 - Grey

# 8 - Yellow

# 9 - Lred

# 10 - Lgreen

# 11 - Lblue

# 12 - Lmagenta

# 13 - Lcyan

# 14 - White

# Example: "13 11 9 5" - (Enabled)

# Default: "" - (Disabled)

LogColors = ""

#

# EnableLogDB

# Description: Write log messages to database (LogDatabaseInfo).

# Default: 0 - (Disabled)

# 1 - (Enabled)

EnableLogDB = 0

#

# DBLogLevel

# Description: Log level of databases logging.

# Default: 2 - (Detail)

# 0 - (Minimum)

# 1 - (Basic)

# 3 - (Full/Debug)

DBLogLevel = 2

#

# LogDB.Char

# Description: Log character operations to database.

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogDB.Char = 0

#

# LogDB.GM

# Description: Log gamemaster commands to database.

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogDB.GM = 0

#

# LogDB.RA

# Description: Log remote access events to database.

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogDB.RA = 0

#

# LogDB.World

# Description: Log world server packets to database.

# Default: 0 - (Disabled)

# 1 - (Enabled, May have performance impact)

LogDB.World = 0

#

# LogDB.Chat

# Description: Log chat messages to database.

# Default: 0 - (Disabled)

# 1 - (Enabled)

LogDB.Chat = 0

# ChatLogFile

# Description: Log file for chat logs.

# Default: "Chat.log" - (Enabled)

# "" - (Disabled)

ChatLogFile = "Chat.log"

# ChatLogTimestamp

# Description: Append timestamp to the chat log file name.

# Logname_YYYY-MM-DD_HH-MM-SS.Ext for Logname.Ext

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogTimestamp = 0

#

# ChatLogs.Channel

# Description: Log custom channel chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Channel = 0

#

# ChatLogs.Whisper

# Description: Log whispers between players.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Whisper = 0

#

# ChatLogs.SysChan

# Description: Log system channel messages.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.SysChan = 0

#

# ChatLogs.Party

# Description: Log party chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Party = 0

#

# ChatLogs.Raid

# Description: Log raid chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Raid = 0

#

# ChatLogs.Guild

# Description: Log guild chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Guild = 0

#

# ChatLogs.Public

# Description: Log public chat (say/yell/emote).

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Public = 0

#

# ChatLogs.Addon

# Description: Log addon messages.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Addon = 0

#

# ChatLogs.BattleGround

# Description: Log battleground chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.BattleGround = 0

#

###################################################################################################

###################################################################################################

# SERVER SETTINGS

#

# GameType

# Description: Server realm type.

# Default: 0 - (NORMAL)

# 1 - (PVP)

# 4 - (NORMAL)

# 6 - (RP)

# 8 - (RPPVP)

# 16 - (FFA_PVP, Free for all pvp mode like arena PvP in all zones except rest

# activated places and sanctuaries)

GameType = 0

#

# RealmZone

# Description: Server realm zone. Set allowed alphabet in character, etc. names.

# Default 1 - (Development - any language)

# 2 - (United States - extended-Latin)

# 3 - (Oceanic - extended-Latin)

# 4 - (Latin America - extended-Latin)

# 5 - (Tournament - basic-Latin at create, any at login)

# 6 - (Korea - East-Asian)

# 7 - (Tournament - basic-Latin at create, any at login)

# 8 - (English - extended-Latin)

# 9 - (German - extended-Latin)

# 10 - (French - extended-Latin)

# 11 - (Spanish - extended-Latin)

# 12 - (Russian - Cyrillic)

# 13 - (Tournament - basic-Latin at create, any at login)

# 14 - (Taiwan - East-Asian)

# 15 - (Tournament - basic-Latin at create, any at login)

# 16 - (China - East-Asian)

# 17 - (CN1 - basic-Latin at create, any at login)

# 18 - (CN2 - basic-Latin at create, any at login)

# 19 - (CN3 - basic-Latin at create, any at login)

# 20 - (CN4 - basic-Latin at create, any at login)

# 21 - (CN5 - basic-Latin at create, any at login)

# 22 - (CN6 - basic-Latin at create, any at login)

# 23 - (CN7 - basic-Latin at create, any at login)

# 24 - (CN8 - basic-Latin at create, any at login)

# 25 - (Tournament - basic-Latin at create, any at login)

# 26 - (Test Server - any language)

# 27 - (Tournament - basic-Latin at create, any at login)

# 28 - (QA Server - any language)

# 29 - (CN9 - basic-Latin at create, any at login)

RealmZone = 1

#

# StrictPlayerNames

# Description: Limit player name to language specific symbol set. Prevents character

# creation and forces rename request if not allowed symbols are used

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictPlayerNames = 0

#

# StrictCharterNames

# Description: Limit guild/arena team charter names to language specific symbol set.

# Prevents charter creation if not allowed symbols are used.

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictCharterNames = 0

#

# StrictPetNames

# Description: Limit pet names to language specific symbol set.

# Prevents pet naming if not allowed symbols are used.

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictPetNames = 0

#

# DBC.Locale

# Description: DBC language settings.

# Default: 255 - (Auto Detect)

# 0 - (English)

# 1 - (Korean)

# 2 - (French)

# 3 - (German)

# 4 - (Chinese)

# 5 - (Taiwanese)

# 6 - (Spanish)

# 7 - (Spanish Mexico)

# 8 - (Russian)

DBC.Locale = 255

#

# DeclinedNames

# Description: Allow Russian clients to set and use declined names.

# Default: 0 - (Disabled, Except when the Russian RealmZone is set)

# 1 - (Enabled)

DeclinedNames = 0

#

# Expansion

# Description: Allow server to use content from expansions. Checks for expansion-related

# map files, client compatibility and class/race character creation.

# Default: 2 - (Expansion 2)

# 1 - (Expansion 1)

# 0 - (Disabled, Ignore and disable expansion content (maps, races, classes)

Expansion = 2

#

# MinPlayerName

# Description: Minimal player name length.

# Range: 1-12

# Default: 2

MinPlayerName = 2

#

# MinCharterName

# Description: Minimal charter name length.

# Range: 1-24

# Default: 2

MinCharterName = 2

#

# MinPetName

# Description: Minimal pet name length.

# Range: 1-12

# Default: 2

MinPetName = 2

#

# MaxWhoListReturns

# Description: Set the max number of players returned in the /who list and interface.

# Default: 49 - (stable)

MaxWhoListReturns = 49

#

# CharacterCreating.Disabled

# Description: Disable character creation for players based on faction.

# Default: 0 - (Enabled, All factions are allowed)

# 1 - (Disabled, Alliance)

# 2 - (Disabled, Horde)

# 3 - (Disabled, Both factions)

CharacterCreating.Disabled = 0

#

# CharacterCreating.Disabled.RaceMask

# Description: Mask of races which cannot be created by players.

# Example: 1536 - (1024 + 512, Blood Elf and Draenei races are disabled)

# Default: 0 - (Enabled, All races are allowed)

# 1 - (Disabled, Human)

# 2 - (Disabled, Orc)

# 4 - (Disabled, Dwarf)

# 8 - (Disabled, Night Elf)

# 16 - (Disabled, Undead)

# 32 - (Disabled, Tauren)

# 64 - (Disabled, Gnome)

# 128 - (Disabled, Troll)

# 512 - (Disabled, Blood Elf)

# 1024 - (Disabled, Draenei)

CharacterCreating.Disabled.RaceMask = 0

#

# CharacterCreating.Disabled.ClassMask

# Description: Mask of classes which cannot be created by players.

# Example: 288 - (32 + 256, Death Knight and Warlock classes are disabled)

# Default: 0 - (Enabled, All classes are allowed)

# 1 - (Disabled, Warrior)

# 2 - (Disabled, Paladin)

# 4 - (Disabled, Hunter)

# 8 - (Disabled, Rogue)

# 16 - (Disabled, Undead)

# 32 - (Disabled, Death Knight)

# 64 - (Disabled, Shaman)

# 128 - (Disabled, Mage)

# 256 - (Disabled, Warlock)

# 1024 - (Disabled, Druid)

CharacterCreating.Disabled.ClassMask = 0

#

# CharactersPerAccount

# Description: Limit number of characters per account on all realms on this realmlist.

# Important: Number must be >= CharactersPerRealm

# Default: 50

CharactersPerAccount = 50

#

# CharactersPerRealm

# Description: Limit number of characters per account on this realm.

# Range: 1-10

# Default: 10 - (Client limitation)

CharactersPerRealm = 10

#

# HeroicCharactersPerRealm

# Description: Limit number of heroic class characters per account on this realm.

# Range: 1-10

# Default: 1

HeroicCharactersPerRealm = 1

#

# CharacterCreating.MinLevelForHeroicCharacter

# Description: Limit creating heroic characters only for account with another

# character of specific level (ignored for GM accounts)

# Default: 55 - (Enabled, Requires at least another level 55 character)

# 0 - (Disabled)

# 1 - (Enabled, Requires at least another level 1 character)

CharacterCreating.MinLevelForHeroicCharacter = 55

#

# SkipCinematics

# Description: Disable cinematic intro at first login after character creation.

# Prevents buggy intros in case of custom start location coordinates.

# Default: 0 - (Show intro for each new character)

# 1 - (Show intro only for first character of selected race)

# 2 - (Disable intro for all classes)

SkipCinematics = 0

#

# MaxPlayerLevel

# Description: Maximum level that can be reached by players.

# Important: Levels beyond 100 are not recommended at all.

# Range: 1-255

# Default: 80

MaxPlayerLevel = 80

#

# MinDualSpecLevel

# Description: Level requirement for Dual Talent Specialization

# Default: 40

MinDualSpecLevel = 40

#

# StartPlayerLevel

# Description: Starting level for characters after creation.

# Range: 1-MaxPlayerLevel

# Default: 1

StartPlayerLevel = 1

#

# StartHeroicPlayerLevel

# Description: Staring level for heroic class characters after creation.

# Range: 1-MaxPlayerLevel

# Default: 55

StartHeroicPlayerLevel = 55

#

# StartPlayerMoney

# Description: Amount of money (in Copper) that a character has after creation.

# Default: 0

# 100 - (1 Silver)

StartPlayerMoney = 0

#

# MaxHonorPoints

# Description: Maximum honor points a character can have.

# Default: 75000

MaxHonorPoints = 75000

#

# StartHonorPoints

# Description: Amount of honor points that characters have after creation.

# Default: 0

StartHonorPoints = 0

#

# MaxArenaPoints

# Description: Maximum arena points a character can have.

# Default: 10000

MaxArenaPoints = 10000

#

# StartArenaPoints

# Description: Amount of arena points that characters has after creation.

# Default: 0

StartArenaPoints = 0

#

# RecruitAFriend.MaxLevel

# Description: Highest level up to which a character can benefit from the Recruit-A-Friend

# experience multiplier.

# Default: 60

RecruitAFriend.MaxLevel = 60

#

# RecruitAFriend.MaxDifference

# Description: Highest level difference between linked Recruiter and Friend benefit from

# the Recruit-A-Friend experience multiplier.

# Default: 4

RecruitAFriend.MaxDifference = 4

#

# InstantLogout

# Description: Required security level for instantly logging out everywhere.

# Does not work while in combat, dueling or falling.

# Default: 1 - (Enabled, Mods/GMs/Admins)

# 0 - (Enabled, Everyone)

# 2 - (Enabled, GMs/Admins)

# 3 - (Enabled, Admins)

# 4 - (Disabled)

InstantLogout = 1

#

# DisableWaterBreath

# Description: Required security level for water breathing.

# Default: 4 - (Disabled)

# 0 - (Enabled, Everyone)

# 1 - (Enabled, Mods/GMs/Admins)

# 2 - (Enabled, GMs/Admins)

# 3 - (Enabled, Admins)

DisableWaterBreath = 4

#

# AllFlightPaths

# Description: Character knows all flight paths (of both factions) after creation.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllFlightPaths = 0

#

# InstantFlightPaths

# Description: Flight paths will take players to their destination instantly instead

# of making them wait while flying.

# Default: 0 - (Disabled)

# 1 - (Enabled)

InstantFlightPaths = 0

#

# AlwaysMaxSkillForLevel

# Description: Players will automatically gain max skill level when logging in or leveling

# up.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AlwaysMaxSkillForLevel = 0

#

# ActivateWeather

# Description: Activate the weather system.

# Default: 1 - (Enabled)

# 0 - (Disabled)

ActivateWeather = 1

#

# CastUnstuck

# Description: Allow casting the Unstuck spell using .start or unstuck button in client

# help options.

# Default: 1 - (Enabled)

# 0 - (Disabled)

CastUnstuck = 1

#

# Instance.IgnoreLevel

# Description: Ignore level requirement when entering instances.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Instance.IgnoreLevel = 0

#

# Instance.IgnoreRaid

# Description: Ignore raid group requirement when entering instances.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Instance.IgnoreRaid = 0

#

# Instance.ResetTimeHour

# Description: Hour of the day when the global instance reset occurs.

# Range: 0-23

# Default: 4 - (04:00 AM)

Instance.ResetTimeHour = 4

#

# Instance.UnloadDelay

# Description: Time (in milliseconds) before instance maps are unloaded from memory if no

# characters are inside.

# Default: 1800000 - (Enabled, 30 minutes)

# 0 - (Disabled, Instance maps are kept in memory until the instance

# resets)

Instance.UnloadDelay = 1800000

#

# Quests.LowLevelHideDiff

# Description: Level difference between player and quest level at which quests are

# considered low-level and are not shown via exclamation mark (!) at quest

# givers.

# Default: 4 - (Enabled, Hide quests that have 4 levels less than the character)

# -1 - (Disabled, Show all available quest marks)

Quests.LowLevelHideDiff = 4

#

# Quests.HighLevelHideDiff

# Description: Level difference between player and quest level at which quests are

# considered high-level and are not shown via exclamation mark (!) at quest

# givers.

# Default: 7 - (Enabled, Hide quests that have 7 levels more than the character)

# -1 - (Disabled, Show all available quest marks)

Quests.HighLevelHideDiff = 7

#

# Quests.IgnoreRaid

# Description: Allow non-raid quests to be completed while in a raid group.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Quests.IgnoreRaid = 0

#

# Quests.IgnoreAutoAccept

# Description: Ignore auto accept flag. Clients will have to manually accept all quests.

# Default: 0 - (Disabled, DB values determine if quest is marked auto accept or not.)

# 1 - (Enabled, clients will not be told to automatically accept any quest.)

Quests.IgnoreAutoAccept = 0

#

# Quests.IgnoreAutoComplete

# Description: Ignore auto complete flag. Clients will have to manually complete all quests.

# Default: 0 - (Disabled, DB values determine if quest is marked auto complete or not.)

# 1 - (Enabled, clients will not be told to automatically complete any quest.)

Quests.IgnoreAutoComplete = 0

#

# Guild.EventLogRecordsCount

# Description: Number of log entries for guild events that are stored per guild. Old entries

# will be overwritten if the number of log entries exceed the configured value.

# High numbers prevent this behavior but may have performance impacts.

# Default: 100

Guild.EventLogRecordsCount = 100

#

# Guild.BankEventLogRecordsCount

# Description: Number of log entries for guild bank events that are stored per guild. Old

# entries will be overwritten if the number of log entries exceed the

# configured value. High numbers prevent this behavior but may have performance

# impacts.

# Default: 25 - (Minimum)

Guild.BankEventLogRecordsCount = 25

#

# MaxPrimaryTradeSkill

# Description: Maximum number of primary professions a character can learn.

# Range: 0-10

# Default: 2

MaxPrimaryTradeSkill = 2

#

# MinPetitionSigns

# Description: Number of required signatures on charters to create a guild.

# Range: 0-9

# Default: 9

MinPetitionSigns = 9

#

# MaxGroupXPDistance

# Description: Max distance to creature for group member to get experience at creature

# death.

# Default: 74

MaxGroupXPDistance = 74

#

# MaxRecruitAFriendBonusDistance

# Description: Max distance between character and and group to gain the Recruit-A-Friend

# XP multiplier.

# Default: 100

MaxRecruitAFriendBonusDistance = 100

#

# MailDeliveryDelay

# Description: Time (in seconds) mail delivery is delayed when sending items.

# Default: 3600 - (1 hour)

MailDeliveryDelay = 3600

#

# SkillChance.Prospecting

# Description: Allow skill increase from prospecting.

# Default: 0 - (Disabled)

# 1 - (Enabled)

SkillChance.Prospecting = 0

#

# SkillChance.Milling

# Description: Allow skill increase from milling.

# Default: 0 - (Disabled)

# 1 - (Enabled)

SkillChance.Milling = 0

#

# OffhandCheckAtSpellUnlearn

# Description: Unlearning certain spells can change offhand weapon restrictions

# for equip slots.

# Default: 1 - (Recheck offhand slot weapon at unlearning a spell)

# 0 - (Recheck offhand slot weapon only at zone update)

OffhandCheckAtSpellUnlearn = 1

#

# ClientCacheVersion

# Description: Client cache version for client cache data reset. Use any value different

# from DB and not recently been used to trigger client side cache reset.

# Default: 0 - (Use DB value from world DB db_version.cache_id field)

ClientCacheVersion = 0

#

# Event.Announce

# Description: Announce events.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Event.Announce = 0

#

# BeepAtStart

# Description: Beep when the world server finished starting (Unix/Linux systems).

# Default: 1 - (Enabled)

# 0 - (Disabled)

BeepAtStart = 1

#

# Motd

# Description: Message of the Day, displayed at login.

# Use '@' for a newline and be sure to escape special characters.

# Example: "Welcome to John's [email protected] server runs on Trinity Core."

# Default: "Welcome to a Trinity Core server."

Motd = "Welcome to a Trinity Core server."

#

# Server.LoginInfo

# Description: Display core version (.server info) on login.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Server.LoginInfo = 0

#

# Command.LookupMaxResults

# Description: Number of results being displayed using a .lookup command.

# Default: 0 - (Unlimited)

Command.LookupMaxResults = 0

#

# AllowTickets

# Description: Allow/disallow sending new tickets.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowTickets = 1

#

# DungeonFinder.Enable

# Description: Dungeon and raid finder system.

# Default: 0 - (Disabled)

# 1 - (Enabled, Experimental as of still being in development)

DungeonFinder.Enable = 0

#

# DBC.EnforceItemAttributes

# Description: Disallow overriding item attributes stored in DBC files with values from the

# database.

# Default: 1 - (Enabled, Enforce DBC values)

# 0 - (Disabled, Use database values)

DBC.EnforceItemAttributes = 1

#

# AccountInstancesPerHour

# Description: Controls the max amount of different instances player can enter within hour

# Default: 5

AccountInstancesPerHour = 5

#

###################################################################################################

###################################################################################################

# PLAYER INTERACTION

#

# AllowTwoSide.Accounts

# Description: Allow creating characters of both factions on the same account.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowTwoSide.Accounts = 1

#

# AllowTwoSide.Interaction.Chat

# Description: Allow say chat between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Chat = 0

#

# AllowTwoSide.Interaction.Channel

# Description: Allow channel chat between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Channel = 0

#

# AllowTwoSide.Interaction.Group

# Description: Allow group joining between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Group = 0

#

# AllowTwoSide.Interaction.Guild

# Description: Allow guild joining between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Guild = 0

#

# AllowTwoSide.Interaction.Auction

# Description: Allow auctions between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Auction = 0

#

# AllowTwoSide.Interaction.Mail

# Description: Allow sending mails between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Mail = 0

#

# AllowTwoSide.WhoList

# Description: Show characters from both factions in the /who list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.WhoList = 0

#

# AllowTwoSide.AddFriend

# Description: Allow adding friends from other faction the friends list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.AddFriend = 0

#

# AllowTwoSide.Trade

# Description: Allow trading between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Trade = 0

#

# TalentsInspecting

# Description: Allow inspecting characters from the opposing faction.

# Doesn't affect characters in gamemaster mode.

# Default: 1 - (Enabled)

# 0 - (Disabled)

TalentsInspecting = 1

#

###################################################################################################

###################################################################################################

# CREATURE SETTINGS

#

# ThreatRadius

# Description: Distance for creatures to evade after being pulled away from the combat

# starting point. If ThreatRadius is less than creature aggro radius then aggro

# radius will be used.

# Default: 60

ThreatRadius = 60

#

# Rate.Creature.Aggro

# Description: Aggro radius percentage.

# Default: 1 - (Enabled, 100%)

# 1.5 - (Enabled, 150%)

# 0 - (Disabled, 0%)

Rate.Creature.Aggro = 1

#

# CreatureFamilyFleeAssistanceRadius

# Description: Distance for fleeing creatures seeking assistance from other creatures.

# Default: 30 - (Enabled)

# 0 - (Disabled)

CreatureFamilyFleeAssistanceRadius = 30

#

# CreatureFamilyAssistanceRadius

# Description: Distance for creatures calling for assistance from other creatures without

# moving.

# Default: 10 - (Enabled)

# 0 - (Disabled)

CreatureFamilyAssistanceRadius = 10

#

# CreatureFamilyAssistanceDelay

# Description: Time (in milliseconds) before creature assistance call.

# Default: 1500 - (1.5 Seconds)

CreatureFamilyAssistanceDelay = 1500

#

# CreatureFamilyFleeDelay

# Description: Time (in milliseconds) during which creature can flee if no assistance was

# found.

# Default: 7000 (7 Seconds)

CreatureFamilyFleeDelay = 7000

#

# WorldBossLevelDiff

# Description: World boss level difference.

# Default: 3

WorldBossLevelDiff = 3

#

# Corpse.Decay.NORMAL

# Corpse.Decay.RARE

# Corpse.Decay.ELITE

# Corpse.Decay.RAREELITE

# Corpse.Decay.WORLDBOSS

# Description: Time (in seconds) until creature corpse will decay if not looted or skinned.

# Default: 60 - (1 Minute, Corpse.Decay.NORMAL)

# 300 - (5 Minutes, Corpse.Decay.RARE)

# 300 - (5 Minutes, Corpse.Decay.ELITE)

# 300 - (5 Minutes, Corpse.Decay.RAREELITE)

# 3600 - (1 Hour, Corpse.Decay.WORLDBOSS)

Corpse.Decay.NORMAL = 60

Corpse.Decay.RARE = 300

Corpse.Decay.ELITE = 300

Corpse.Decay.RAREELITE = 300

Corpse.Decay.WORLDBOSS = 3600

#

# Rate.Corpse.Decay.Looted

# Description: Multiplier for Corpse.Decay.* to configure how long creature corpses stay

# after they have been looted.

# Default: 0.5

Rate.Corpse.Decay.Looted = 0.5

#

# Rate.Creature.Normal.Damage

# Rate.Creature.Elite.Elite.Damage

# Rate.Creature.Elite.RARE.Damage

# Rate.Creature.Elite.RAREELITE.Damage

# Rate.Creature.Elite.WORLDBOSS.Damage

# Description: Mulitplier for creature melee damage.

# Default: 1 - (Rate.Creature.Normal.Damage)

# 1 - (Rate.Creature.Elite.Elite.Damage)

# 1 - (Rate.Creature.Elite.RARE.Damage)

# 1 - (Rate.Creature.Elite.RAREELITE.Damage)

# 1 - (Rate.Creature.Elite.WORLDBOSS.Damage)

#

Rate.Creature.Normal.Damage = 1

Rate.Creature.Elite.Elite.Damage = 1

Rate.Creature.Elite.RARE.Damage = 1

Rate.Creature.Elite.RAREELITE.Damage = 1

Rate.Creature.Elite.WORLDBOSS.Damage = 1

#

# Rate.Creature.Normal.SpellDamage

# Rate.Creature.Elite.Elite.SpellDamage

# Rate.Creature.Elite.RARE.SpellDamage

# Rate.Creature.Elite.RAREELITE.SpellDamage

# Rate.Creature.Elite.WORLDBOSS.SpellDamage

# Description: Mulitplier for creature spell damage.

# Default: 1 - (Rate.Creature.Normal.SpellDamage)

# 1 - (Rate.Creature.Elite.Elite.SpellDamage)

# 1 - (Rate.Creature.Elite.RARE.SpellDamage)

# 1 - (Rate.Creature.Elite.RAREELITE.SpellDamage)

# 1 - (Rate.Creature.Elite.WORLDBOSS.SpellDamage)

Rate.Creature.Normal.SpellDamage = 1

Rate.Creature.Elite.Elite.SpellDamage = 1

Rate.Creature.Elite.RARE.SpellDamage = 1

Rate.Creature.Elite.RAREELITE.SpellDamage = 1

Rate.Creature.Elite.WORLDBOSS.SpellDamage = 1

#

# Rate.Creature.Normal.HP

# Rate.Creature.Elite.Elite.HP

# Rate.Creature.Elite.RARE.HP

# Rate.Creature.Elite.RAREELITE.HP

# Rate.Creature.Elite.WORLDBOSS.HP

# Description: Mulitplier for creature health.

# Default: 1 - (Rate.Creature.Normal.HP)

# 1 - (Rate.Creature.Elite.Elite.HP)

# 1 - (Rate.Creature.Elite.RARE.HP)

# 1 - (Rate.Creature.Elite.RAREELITE.HP)

# 1 - (Rate.Creature.Elite.WORLDBOSS.HP)

Rate.Creature.Normal.HP = 1

Rate.Creature.Elite.Elite.HP = 1

Rate.Creature.Elite.RARE.HP = 1

Rate.Creature.Elite.RAREELITE.HP = 1

Rate.Creature.Elite.WORLDBOSS.HP = 1

#

# ListenRange.Say

# Description: Distance in which players can read say messages from creatures or

# gameobjects.

# Default: 40

ListenRange.Say = 40

#

# ListenRange.TextEmote

# Description: Distance in which players can read emotes from creatures or gameobjects.

# Default: 40

ListenRange.TextEmote = 40

#

# ListenRange.Yell

# Description: Distance in which players can read yell messages from creatures or

# gameobjects.

# Default: 300

ListenRange.Yell = 300

#

###################################################################################################

###################################################################################################

# CHAT SETTINGS

#

# ChatFakeMessagePreventing

# Description: Chat protection from creating fake messages using a lot spaces or other

# invisible symbols. Not applied to the addon language, but may break old

# addons that use normal languages for sending data to other clients.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatFakeMessagePreventing = 0

#

# ChatStrictLinkChecking.Severity

# Description: Check chat messages for ingame links to spells, items, quests, etc.

# Default: 0 - (Disabled)

# 1 - (Enabled, Check if only valid pipe commands are used, Prevents posting

# pictures.)

# 2 - (Enabled, Verify that pipe commands are used in a correct order)

# 3 - (Check if color, entry and name don't contradict each other. For this to

# work correctly, please assure that you have extracted locale DBCs of

# every language specific client playing on this server)

ChatStrictLinkChecking.Severity = 0

#

# ChatStrictLinkChecking.Kick

# Description: Defines what should be done if a message is considered to contain invalid

# pipe commands.

# Default: 0 - (Silently ignore message)

# 1 - (Disconnect players who sent malformed messages)

ChatStrictLinkChecking.Kick = 0

#

# ChatFlood.MessageCount

# Description: Chat flood protection, number of messages before player gets muted.

# Default: 10 - (Enabled)

# 0 - (Disabled)

ChatFlood.MessageCount = 10

#

# ChatFlood.MessageDelay

# Description: Time (in seconds) between messages to be counted into ChatFlood.MessageCount.

# Default: 1

ChatFlood.MessageDelay = 1

#

# ChatFlood.MuteTime

# Description: Time (in seconds) characters get muted for violating ChatFlood.MessageCount.

# Default: 10

ChatFlood.MuteTime = 10

#

# Channel.RestrictedLfg

# Description: Restrict LookupForGroup channel to characters registered in the LFG tool.

# Default: 1 - (Enabled, Allow join to channel only if registered in LFG)

# 0 - (Disabled, Allow join to channel in any time)

Channel.RestrictedLfg = 1

#

# Channel.SilentlyGMJoin

# Description: Silently join GM characters to channels. If set to 1, channel kick and ban

# commands issued by a GM will not be broadcasted.

# Default: 0 - (Disabled, Join with announcement)

# 1 - (Enabled, Join without announcement)

Channel.SilentlyGMJoin = 0

#

# ChatLevelReq.Channel

# Description: Level requirement for characters to be able to write in chat channels.

# Default: 1

ChatLevelReq.Channel = 1

#

# ChatLevelReq.Whisper

# Description: Level requirement for characters to be able to whisper other characters.

# Default: 1

ChatLevelReq.Whisper = 1

#

# ChatLevelReq.Say

# Description: Level requirement for characters to be able to use say/yell/emote.

# Default: 1

ChatLevelReq.Say = 1

#

# AllowPlayerCommands

# Description: Allow players to use commands.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowPlayerCommands = 1

#

# PreserveCustomChannels

# Description: Store custom chat channel settings like password, automatic ownership handout

# or ban list in the database. Needs to be enabled to save custom

# world/trade/etc. channels that have automatic ownership handout disabled.

# (.channel set ownership $channel off)

# Default: 0 - (Disabled, Blizzlike, Channel settings are lost if last person left)

# 1 - (Enabled)

PreserveCustomChannels = 1

#

# PreserveCustomChannelDuration

# Description: Time (in days) that needs to pass before the customs chat channels get

# cleaned up from the database. Only channels with ownership handout enabled

# (default behavior) will be cleaned.

# Default: 14 - (Enabled, Clean channels that haven't been used for 14 days)

# 0 - (Disabled, Infinite channel storage)

PreserveCustomChannelDuration = 14

#

###################################################################################################

###################################################################################################

# GAME MASTER SETTINGS

#

# GM.LoginState

# Description: GM mode at login.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.LoginState = 2

#

# GM.Visible

# Description: GM visibility at login.

# Default: 2 - (Last save state)

# 0 - (Invisible)

# 1 - (Visible)

GM.Visible = 2

#

# GM.Chat

# Description: GM chat mode at login.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.Chat = 2

#

# GM.WhisperingTo

# Description: Is GM accepting whispers from player by default or not.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.WhisperingTo = 2

#

# GM.InGMList.Level

# Description: Maximum GM level shown in GM list (if enabled) in non-GM state (.gm off).

# Default: 3 - (Anyone)

# 0 - (Only players)

# 1 - (Only moderators)

# 2 - (Only gamemasters)

GM.InGMList.Level = 3

#

# GM.InWhoList.Level

# Description: Max GM level showed in who list (if visible).

# Default: 3 - (Anyone)

# 0 - (Only players)

# 1 - (Only moderators)

# 2 - (Only gamemasters)

GM.InWhoList.Level = 3

#

# GM.LogTrade

# Description: Include GM trade and trade slot enchanting operations in GM log.

# Default: 1 - (Enabled)

# 0 - (Disabled)

GM.LogTrade = 1

#

# GM.StartLevel

# Description: GM character starting level.

# Default: 1

GM.StartLevel = 1

#

# GM.AllowInvite

# Description: Allow players to invite GM characters.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.AllowInvite = 0

#

# GM.AllowFriend

# Description: Allow players to add GM characters to their friends list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.AllowFriend = 0

#

# GM.LowerSecurity

# Description: Allow lower security levels to use commands on higher security level

# characters.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.LowerSecurity = 0

#

# GM.TicketSystem.ChanceOfGMSurvey

# Description: Chance of sending a GM survey after ticket completion.

# Default: 50 - (Enabled)

# 0 - (Disabled)

GM.TicketSystem.ChanceOfGMSurvey = 50

#

###################################################################################################

###################################################################################################

# VISIBILITY AND DISTANCES

#

# Visibility.GroupMode

# Description: Group visibility modes. Defines which groups can aways detect invisible

# characters of the same raid, group or faction.

# Default: 1 - (Raid)

# 0 - (Party)

# 2 - (Faction)

Visibility.GroupMode = 1

#

# Visibility.Distance.Continents

# Visibility.Distance.Instances

# Visibility.Distance.BGArenas

# Description: Visibility distance to see other players or gameobjects.

# Visibility on continents on retail ~90 yards. In BG/Arenas ~180.

# For instances default ~120.

# Max limited by active player zone: ~ 333

# Min limit is max aggro radius (45) * Rate.Creature.Aggro

# Default: 90 - (Visibility.Distance.Continents)

# 120 - (Visibility.Distance.Instances)

# 180 - (Visibility.Distance.BGArenas)

Visibility.Distance.Continents = 90

Visibility.Distance.Instances = 120

Visibility.Distance.BGArenas = 180

#

# Visibility.Notify.Period.OnContinents

# Visibility.Notify.Period.InInstances

# Visibility.Notify.Period.InBGArenas

# Description: Time (in milliseconds) for visibility update period. Lower values may have

# performance impact.

# Default: 1000 - (Visibility.Notify.Period.OnContinents)

# 1000 - (Visibility.Notify.Period.InInstances)

# 1000 - (Visibility.Notify.Period.InBGArenas)

Visibility.Notify.Period.OnContinents = 1000

Visibility.Notify.Period.InInstances = 1000

Visibility.Notify.Period.InBGArenas = 1000

#

###################################################################################################

###################################################################################################

# SERVER RATES

#

# Rate.Health

# Rate.Mana

# Rate.Rage.Income

# Rate.Rage.Loss

# Rate.RunicPower.Income

# Rate.RunicPower.Loss

# Rate.Focus

# Rate.Energy

# Rate.Loyalty

# Description: Multiplier to configure health, mana, incoming rage, loss of rage, focus

# energy and loyalty increase or decrease.

# Default: 1 - (Rate.Health)

# 1 - (Rate.Mana)

# 1 - (Rate.Rage.Income)

# 1 - (Rate.Rage.Loss)

# 1 - (Rate.RunicPower.Income)

# 1 - (Rate.RunicPower.Loss)

# 1 - (Rate.Focus)

# 1 - (Rate.Energy)

# 1 - (Rate.Loyalty)

Rate.Health = 1

Rate.Mana = 1

Rate.Rage.Income = 1

Rate.Rage.Loss = 1

Rate.RunicPower.Income = 1

Rate.RunicPower.Loss = 1

Rate.Focus = 1

Rate.Energy = 1

Rate.Loyalty = 1

#

# Rate.Skill.Discovery

# Description: Multiplier for skill discovery.

# Default: 1

Rate.Skill.Discovery = 1

#

# Rate.Drop.Item.Poor

# Rate.Drop.Item.Normal

# Rate.Drop.Item.Uncommon

# Rate.Drop.Item.Rare

# Rate.Drop.Item.Epic

# Rate.Drop.Item.Legendary

# Rate.Drop.Item.Artifact

# Rate.Drop.Item.Referenced

# Rate.Drop.Money

# Description: Drop rates for money and items based on quality.

# Default: 1 - (Rate.Drop.Item.Poor)

# 1 - (Rate.Drop.Item.Normal)

# 1 - (Rate.Drop.Item.Uncommon)

# 1 - (Rate.Drop.Item.Rare)

# 1 - (Rate.Drop.Item.Epic)

# 1 - (Rate.Drop.Item.Legendary)

# 1 - (Rate.Drop.Item.Artifact)

# 1 - (Rate.Drop.Item.Referenced)

# 1 - (Rate.Drop.Money)

Rate.Drop.Item.Poor = 1

Rate.Drop.Item.Normal = 1

Rate.Drop.Item.Uncommon = 1

Rate.Drop.Item.Rare = 1

Rate.Drop.Item.Epic = 1

Rate.Drop.Item.Legendary = 1

Rate.Drop.Item.Artifact = 1

Rate.Drop.Item.Referenced = 1

Rate.Drop.Money = 1

#

# Rate.Drop.Item.ReferencedAmount

# Description: Multiplier for referenced loot amount.

# Default: 1

Rate.Drop.Item.ReferencedAmount = 1

#

# Rate.XP.Kill

# Rate.XP.Quest

# Rate.XP.Explore

# Description: Experience rates.

# Default: 1 - (Rate.XP.Kill)

# 1 - (Rate.XP.Quest)

# 1 - (Rate.XP.Explore)

Rate.XP.Kill = 1

Rate.XP.Quest = 1

Rate.XP.Explore = 1

#

# Rate.RepairCost

# Description: Repair cost rate.

# Default: 1

Rate.RepairCost = 1

#

# Rate.Rest.InGame

# Rate.Rest.Offline.InTavernOrCity

# Rate.Rest.Offline.InWilderness

# Description: Resting points grow rates.

# Default: 1 - (Rate.Rest.InGame)

# 1 - (Rate.Rest.Offline.InTavernOrCity)

# 1 - (Rate.Rest.Offline.InWilderness)

Rate.Rest.InGame = 1

Rate.Rest.Offline.InTavernOrCity = 1

Rate.Rest.Offline.InWilderness = 1

#

# Rate.Damage.Fall

# Description: Damage after fall rate.

# Default: 1

Rate.Damage.Fall = 1

#

# Rate.Auction.Time

# Rate.Auction.Deposit

# Rate.Auction.Cut

# Description: Auction rates (auction time, deposit get at auction start,

# auction cut from price at auction end)

# Default: 1 - (Rate.Auction.Time)

# 1 - (Rate.Auction.Deposit)

# 1 - (Rate.Auction.Cut)

Rate.Auction.Time = 1

Rate.Auction.Deposit = 1

Rate.Auction.Cut = 1

#

# Rate.Honor

# Description: Honor gain rate.

# Default: 1

Rate.Honor = 1

#

# Rate.Mining.Amount

# Description: Rate for minimum/maximum times a deposit can be used.

# Default: 1

Rate.Mining.Amount = 1

#

# Rate.Mining.Next

# Description: Mining rates.

# Default: Chance to to mine a deposit again.

Rate.Mining.Next = 1

#

# Rate.Talent

# Description: Talent point rate.

# Default: 1

Rate.Talent = 1

#

# Rate.Reputation.Gain

# Description: Reputation gain rate.

# Default: 1

Rate.Reputation.Gain = 1

#

# Rate.Reputation.LowLevel.Kill

# Description: Reputation gain from killing low level (grey) creatures.

# Default: 1

Rate.Reputation.LowLevel.Kill = 1

#

# Rate.Reputation.LowLevel.Quest

# Description: Reputation gain rate.

# Default: 1

Rate.Reputation.LowLevel.Quest = 1

#

# Rate.Reputation.RecruitAFriendBonus

# Description: Reputation bonus rate for recruit-a-friend.

# Default: 0.1

Rate.Reputation.RecruitAFriendBonus = 0.1

#

# Rate.MoveSpeed

# Description: Movement speed rate.

# Default: 1

Rate.MoveSpeed = 1

#

# Rate.InstanceResetTime

# Description: Multiplier for the rate between global raid/heroic instance resets

# (dbc value). Higher value increases the time between resets,

# lower value lowers the time, you need clean instance_reset in

# characters db in order to let new values work.

# Default: 1

Rate.InstanceResetTime = 1

#

# SkillGain.Crafting

# SkillGain.Defense

# SkillGain.Gathering

# SkillGain.Weapon

# Description: Crafting/defense/gathering/weapon skills gain rate.

# Default: 1 - (SkillGain.Crafting)

# 1 - (SkillGain.Defense)

# 1 - (SkillGain.Gathering)

# 1 - (SkillGain.Weapon)

SkillGain.Crafting = 1

SkillGain.Defense = 1

SkillGain.Gathering = 1

SkillGain.Weapon = 1

#

# SkillChance.Orange

# SkillChance.Yellow

# SkillChance.Green

# SkillChance.Grey

# Description: Chance to increase skill based on recipe color.

# Default: 100 - (SkillChance.Orange)

# 75 - (SkillChance.Yellow)

# 25 - (SkillChance.Green)

# 0 - (SkillChance.Grey)

SkillChance.Orange = 100

SkillChance.Yellow = 75

SkillChance.Green = 25

SkillChance.Grey = 0

#

# SkillChance.MiningSteps

# SkillChance.SkinningSteps

# Description: Skinning and Mining chance decreases with skill level.

# Default: 0 - (Disabled)

# 75 - (In 2 times each 75 skill points)

SkillChance.MiningSteps = 0

SkillChance.SkinningSteps = 0

#

# DurabilityLoss.InPvP

# Description: Durability loss on death during PvP.

# Default: 0 - (Disabled)

# 1 - (Enabled)

DurabilityLoss.InPvP = 0

#

# DurabilityLoss.OnDeath

# Description: Durability loss percentage on death.

# Default: 10

DurabilityLoss.OnDeath = 10

#

# DurabilityLossChance.Damage

# Description: Chance to lose durability on one equipped item from damage.

# Default: 0.5 - (100/0.5 = 200, Each 200 damage one equipped item will use durability)

DurabilityLossChance.Damage = 0.5

#

# DurabilityLossChance.Absorb

# Description: Chance to lose durability on one equipped armor item when absorbing damage.

# Default: 0.5 - (100/0.5 = 200, Each 200 absorbed damage one equipped item will lose

# durability)

DurabilityLossChance.Absorb = 0.5

#

# DurabilityLossChance.Parry

# Description: Chance to lose durability on main weapon when parrying attacks.

# Default: 0.05 - (100/0.05 = 2000, Each 2000 parried damage the main weapon will lose

# durability)

DurabilityLossChance.Parry = 0.05

#

# DurabilityLossChance.Block

# Description: Chance to lose durability on shield when blocking attacks.

# Default: 0.05 - (100/0.05 = 2000, Each 2000 blocked damage the shield will lose

# durability)

DurabilityLossChance.Block = 0.05

#

# Death.SicknessLevel

# Description: Starting level for resurrection sickness.

# Example: 11 - (Level 1-10 characters will not be affected,

# Level 11-19 characters will be affected for 1 minute,

# Level 20-MaxPlayerLevel characters will be affected for 10 minutes)

# Default: 11 - (Enabled, See Example)

# MaxPlayerLevel+1 - (Disabled)

# -10 - (Enabled, Level 1+ characters have 10 minute duration)

Death.SicknessLevel = 11

#

# Death.CorpseReclaimDelay.PvP

# Death.CorpseReclaimDelay.PvE

# Description: Increase corpse reclaim delay at PvP/PvE deaths.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Death.CorpseReclaimDelay.PvP = 1

Death.CorpseReclaimDelay.PvE = 0

#

# Death.Bones.World

# Death.Bones.BattlegroundOrArena

# Description: Create bones instead of corpses at resurrection in normal zones, instances,

# battleground or arenas.

# Default: 1 - (Enabled, Death.Bones.World)

# 1 - (Enabled, Death.Bones.BattlegroundOrArena)

# 0 - (Disabled)

Death.Bones.World = 1

Death.Bones.BattlegroundOrArena = 1

#

# Die.Command.Mode

# Description: Do not trigger things like loot from .die command.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Die.Command.Mode = 1

#

###################################################################################################

###################################################################################################

# AUTO BROADCAST

#

# AutoBroadcast.On

# Description: Enable auto broadcast.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AutoBroadcast.On = 0

#

# AutoBroadcast.Center

# Description: Auto broadcasting display method.

# Default: 0 - (Announce)

# 1 - (Notify)

# 2 - (Both)

AutoBroadcast.Center = 0

#

# AutoBroadcast.Timer

# Description: Timer (in milliseconds) for auto broadcasts.

# Default: 60000 - (60 seconds)

AutoBroadcast.Timer = 60000

#

###################################################################################################

###################################################################################################

# BATTLEGROUND CONFIG

#

# Battleground.CastDeserter

# Description: Cast Deserter spell at players who leave battlegrounds in progress.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Battleground.CastDeserter = 1

#

# Battleground.QueueAnnouncer.Enable

# Description: Announce battleground queue status to chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Battleground.QueueAnnouncer.Enable = 0

#

# Battleground.QueueAnnouncer.PlayerOnly

# Description: Battleground queue announcement type.

# Default: 0 - (System message, Anyone can see it)

# 1 - (Private, Only queued players can see it)

Battleground.QueueAnnouncer.PlayerOnly = 0

#

# Battleground.InvitationType

# Description: Set Battleground invitation type.

# Default: 0 - (Normal, Invite as much players to battlegrounds as queued,

# Don't bother with balance)

# 1 - (Experimental, Don't allow to invite much more players

# of one faction)

Battleground.InvitationType = 0

#

# Battleground.PrematureFinishTimer

# Description: Time (in milliseconds) before battleground will end prematurely if there are

# not enough players on one team. (Values defined in battleground template)

# Default: 300000 - (Enabled, 5 minutes)

# 0 - (Disabled, Not recommended)

BattleGround.PrematureFinishTimer = 300000

#

# BattleGround.PremadeGroupWaitForMatch

# Description: Time (in milliseconds) a pre-made group has to wait for matching group of the

# other faction.

# Default: 1800000 - (Enabled, 30 minutes)

# 0 - (Disabled, Not recommended)

BattleGround.PremadeGroupWaitForMatch = 1800000

#

# Battleground.GiveXPForKills

# Description: Give experience for honorable kills in battlegrounds.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Battleground.GiveXPForKills = 0

#

# Battleground.Random.ResetHour

# Description: Hour of the day when the global instance resets occur.

# Range: 0-23

# Default: 6 - (06:00 AM)

Battleground.Random.ResetHour = 6

#

###################################################################################################

###################################################################################################

# ARENA CONFIG

#

# Arena.MaxRatingDifference

# Description: Maximum rating difference between two teams in rated matches.

# Default: 150 - (Enabled)

# 0 - (Disabled)

Arena.MaxRatingDifference = 150

#

# Arena.RatingDiscardTimer

# Description: Time (in milliseconds) after which rating differences are ignored when

# setting up matches.

# Default: 600000 - (Enabled, 10 minutes)

# 0 - (Disabled)

Arena.RatingDiscardTimer = 600000

#

# Arena.AutoDistributePoints

# Description: Automatically distribute arena points.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Arena.AutoDistributePoints = 0

#

# Arena.AutoDistributeInterval

# Description: Time (in days) how often arena points should be distributed if automatic

# distribution is enabled.

# Default: 7 - (Weekly)

Arena.AutoDistributeInterval = 7

#

# Arena.QueueAnnouncer.Enable

# Description: Announce arena queue status to chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Arena.QueueAnnouncer.Enable = 0

#

# Arena.ArenaSeason.ID

# Description: Current area season id shown in clients.

# Default: 8

Arena.ArenaSeason.ID = 8

#

# Arena.ArenaSeason.InProgress

# Description: State of current area season.

# Default: 1 - (Active)

# 0 - (Finished)

Arena.ArenaSeason.InProgress = 1

#

# Arena.ArenaStartRating

# Description: Start rating for new arena teams.

# Default: 0

Arena.ArenaStartRating = 0

#

# Arena.ArenaStartPersonalRating

# Description: Start personal rating when joining a team.

# Default: 0

Arena.ArenaStartPersonalRating = 0

#

# Arena.ArenaStartMatchmakerRating

# Description: Start matchmaker rating for players.

# Default: 1500

Arena.ArenaStartMatchmakerRating = 1500

#

###################################################################################################

###################################################################################################

# NETWORK CONFIG

#

# Network.Threads

# Description: Number of threads for network.

# Default: 1 - (Recommended 1 thread per 1000 connections)

Network.Threads = 1

#

# Network.OutKBuff

# Description: Amount of memory (in bytes) used for the output kernel buffer (see SO_SNDBUF

# socket option, TCP manual).

# Default: -1 - (Use system default setting)

Network.OutKBuff = -1

#

# Network.OutUBuff

# Description: Amount of memory (in bytes) reserved in the user space per connection for

# output buffering.

# Default: 65536

Network.OutUBuff = 65536

#

# Network.TcpNoDelay:

# Description: TCP Nagle algorithm setting.

# Default: 0 - (Enabled, Less traffic, More latency)

# 1 - (Disabled, More traffic, Less latency, TCP_NO_DELAY)

Network.TcpNodelay = 1

#

###################################################################################################

###################################################################################################

# CONSOLE AND REMOTE ACCESS

#

# Console.Enable

# Description: Enable console.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Console.Enable = 1

#

# Ra.Enable

# Description: Enable remote console (telnet).

# Default: 0 - (Disabled)

# 1 - (Enabled)

Ra.Enable = 0

#

# Ra.IP

# Description: Bind remote access to IP/hostname.

# Default: "0.0.0.0" - (Bind to all IPs on the system)

Ra.IP = "0.0.0.0"

#

# Ra.Port

# Description: TCP port to reach the remote console.

# Default: 3443

Ra.Port = 3443

#

# Ra.MinLevel

# Description: Required security level to use the remote console.

# Default: 3

Ra.MinLevel = 3

#

# SOAP.Enable

# Description: Enable soap service

# Default: 0 - (Disabled)

# 1 - (Enabled)

SOAP.Enabled = 0

#

# SOAP.IP

# Description: Bind SOAP service to IP/hostname

# Default: "127.0.0.1" - (Bind to localhost)

SOAP.IP = "127.0.0.1"

#

# SOAP.Port

# Description: TCP port to reach the SOAP service.

# Default: 7878

SOAP.Port = 7878

#

###################################################################################################

###################################################################################################

# CHARACTER DELETE OPTIONS

#

# CharDelete.Method

# Description: Character deletion behavior.

# Default: 0 - (Completely remove character from the database)

# 1 - (Unlink the character from account and free up the name, Appears as

# deleted ingame)

CharDelete.Method = 0

#

# CharDelete.MinLevel

# Description: Required level to use the unlinking method if enabled.

# Default: 0 - (Same method for every level)

# 1+ - (Only characters with the specified level will use the unlinking method)

CharDelete.MinLevel = 0

#

# CharDelete.KeepDays

# Description: Time (in days) before unlinked characters will be removed from the database.

# Default: 30 - (Enabled)

# 0 - (Disabled, Don't delete any characters)

CharDelete.KeepDays = 30

#

###################################################################################################

###################################################################################################

# CUSTOM SERVER OPTIONS

#

# PlayerStart.AllReputation

# Description: Players will start with most of the high level reputations that are needed

# for items, mounts etc.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.AllReputation = 0

#

# PlayerStart.AllSpells

# Description: If enabled, players will start with all their class spells (not talents).

# You must populate playercreateinfo_spell_custom table with the spells you

# want, or this will not work! The table has data for all classes / races up

# to TBC expansion.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.AllSpells = 0

#

# PlayerStart.MapsExplored

# Description: Characters start with all maps explored.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.MapsExplored = 0

#

# HonorPointsAfterDuel

# Description: Amount of honor points the duel winner will get after a duel.

# Default: 0 - (Disabled)

# 1+ - (Enabled)

HonorPointsAfterDuel = 0

#

# AlwaysMaxWeaponSkill

# Description: Players will automatically gain max weapon/defense skill when logging in,

# or leveling.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AlwaysMaxWeaponSkill = 0

#

# PvPToken.Enable

# Description: Character will receive a token after defeating another character that yields

# honor.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PvPToken.Enable = 0

#

# PvPToken.MapAllowType

# Description: Define where characters can receive tokens.

# Default: 4 - (All maps)

# 3 - (Battlegrounds)

# 2 - (FFA areas only like Gurubashi arena)

# 1 - (Battlegrounds and FFA areas)

PvPToken.MapAllowType = 4

#

# PvPToken.ItemID

# Description: Item characters will receive after defeating another character if PvP Token

# system is enabled.

# Default: 29434 - (Badge of justice)

PvPToken.ItemID = 29434

#

# PvPToken.ItemCount

# Description: Number of tokens a character will receive.

# Default: 1

PvPToken.ItemCount = 1

#

# NoResetTalentsCost

# Description: Resetting talents doesn't cost anything.

# Default: 0 - (Disabled)

# 1 - (Enabled)

NoResetTalentsCost = 0

#

# Guild.AllowMultipleGuildMaster

# Description: Allow more than one guild master. Additional Guild Masters must be set using

# the ".guild rank" command.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Guild.AllowMultipleGuildMaster = 0

#

# ShowKickInWorld

# Description: Determines whether a message is broadcasted to the entire server when a

# player gets kicked

# Default: 0 - (Disabled)

# 1 - (Enabled)

ShowKickInWorld = 0

#

# RecordUpdateTimeDiffInterval

# Description: Time (in milliseconds) update time diff is written to the log file.

# Update diff can be used as a performance indicator. Diff < 300: good

# performance. Diff > 600 bad performance, may be caused by high CPU usage.

# Default: 60000 - (Enabled, 1 minute)

# 0 - (Disabled)

RecordUpdateTimeDiffInterval = 60000

#

# MinRecordUpdateTimeDiff

# Description: Only record update time diff which is greater than this value.

# Default: 100

MinRecordUpdateTimeDiff = 100

#

# PlayerStart.String

# Description: String to be displayed at first login of newly created characters.

# Default: "" - (Disabled)

PlayerStart.String = ""

#

# LevelReq.Trade

# Description: Level requirement for characters to be able to trade.

# Default: 1

LevelReq.Trade = 1

#

# LevelReq.Ticket

# Description: Level requirement for characters to be able to write tickets.

# Default: 1

LevelReq.Ticket = 1

#

# LevelReq.Auction

# Description: Level requirement for characters to be able to use the auction house.

# Default: 1

LevelReq.Auction = 1

#

# LevelReq.Mail

# Description: Level requirement for characters to be able to send and receive mails.

# Default: 1

LevelReq.Mail = 1

#

# PlayerDump.DisallowPaths

# Description: Disallow using paths in PlayerDump output files

# Default: 1

PlayerDump.DisallowPaths = 1

#

# PlayerDump.DisallowOverwrite

# Description: Disallow overwriting existing files with PlayerDump

# Default: 1

PlayerDump.DisallowOverwrite = 1

#

###################################################################################################

the ports are opened (8085 and 3724)

windows firewall are deactivated.

Edited by desleal
0

Share this post


Link to post
Share on other sites

Your conf files look fine.

go to http://www.whatsmyip.org/

Then place 'those' IPs in your router.

It should look like.

XX.XX.XX.XX: 8085 -> TCP

XX.XX.XX.XX: 3724 -> TCP

Then open up your realmlist in the DB and put that same IP in 'address'

Give your friends 'that' same external IP.

Just make sure that the Windows firewall resolves 8085 as open as well as 3724, when you run authserver and worldserver the firewall should prompt you to allow access, That goes for all Windows versions.

Welcome to WAN

Turn your windows firewall back on!!

It's just too easy hacking into computers these days.

0

Share this post


Link to post
Share on other sites

I got my Trinitycore server up and running, but when I try to login, I get to the realm list and I just loop there. It doesn't happen to anyone else. I have 2 other friends who are already online and playing. I have looked at EVERY guide on here for realm looping, and none of their problems solutions have been the same for me.

Currently have it set up as:

set realmlist 127.0.0.1 -- When I have it set to any other IP including mine, it does the same, or does not connect to the server at all.

DB Realmlist address is blablabla.no-ip.org

The ports are set to 8085 in worldserver and the database realmlist. The authserver port is set 3724.

Edited by Athena
server removed
0

Share this post


Link to post
Share on other sites

In your worldserver.conf file, what does bind-ip say? If it says anything other than 0.0.0.0, then you will have to use your realmlist. You won't be able to set realmlist to 127.0.0.1

0

Share this post


Link to post
Share on other sites

This was already explained by me many times.

You set your client to the same realmlist as your friends have.

Use your windows hosts file to re-locate the address to local ip.

0

Share this post


Link to post
Share on other sites

Hi it seems that my friend keeps disconnecting on loadingscreens and we checked to see if it works normally on other servers and it did, the problem seems to lie within gm access for some reason, when the realmid is -1 it disconnects him, if it's 1 it keeps him on but disconnects when loading screens pop up, on 1 it just doesn't work, etc, could anyone help out?

Ports: All are open and forwarded properly, checked on a portchecker.

Dns is linked.

ip is correct seeing as he is able to connect at certain points stated above.

Don't know if this will help, but getting this error in server logs when he gets disconnected


WorldSocket::handle_input_header(): client (account: 0, char [GUID: 0, name: <none>]) sent malformed packet (size: 36189, cmd: 718358803)

0

Share this post


Link to post
Share on other sites

The problem is with your server config. I'm not sure what you mean by gm access having anything to do with it since he can't connect properly either way. realmid -1? Huh?

0

Share this post


Link to post
Share on other sites

The problem is with your server config. I'm not sure what you mean by gm access having anything to do with it since he can't connect properly either way. realmid -1? Huh?

I'll post both my configs in code. hold on

Auth:

###############################################

# Trinity Core Auth Server configuration file #

###############################################

[authserver]

###################################################################################################

# SECTION INDEX

#

# EXAMPLE CONFIG

# AUTH SERVER SETTINGS

# MYSQL SETTINGS

#

###################################################################################################

###################################################################################################

# EXAMPLE CONFIG

#

# Variable

# Description: Brief description what the variable is doing.

# Important: Annotation for important things about this variable.

# Example: "Example, i.e. if the value is a string"

# Default: 10 - (Enabled|Comment|Variable name in case of grouped config options)

# 0 - (Disabled|Comment|Variable name in case of grouped config options)

#

# Note to developers:

# - Copy this example to keep the formatting.

# - Line breaks should be at column 100.

###################################################################################################

###################################################################################################

# AUTH SERVER SETTINGS

#

# LogsDir

# Description: Logs directory setting.

# Important: LogsDir needs to be quoted, as the string might contain space characters.

# Logs directory must exists, or log file creation will be disabled.

# Default: "" - (Log files will be stored in the current path)

LogsDir = "logs"

#

# MaxPingTime

# Description: Time (in minutes) between database pings.

# Default: 30

MaxPingTime = 30

#

# RealmServerPort

# Description: TCP port to reach the auth server.

# Default: 3724

RealmServerPort = 3724

#

#

# BindIP

# Description: Bind auth server to IP/hostname

# Default: "0.0.0.0" - (Bind to all IPs on the system)

BindIP = "0.0.0.0"

#

# PidFile

# Description: Auth server PID file.

# Example: "./authserver.pid" - (Enabled)

# Default: "" - (Disabled)

PidFile = ""

#

# UseProcessors

# Description: Processors mask for Windows based multi-processor systems.

# Default: 0 - (Selected by OS)

# 1+ - (Bit mask value of selected processors)

UseProcessors = 0

#

# ProcessPriority

# Description: Process priority setting for Windows based systems.

# Default: 1 - (High)

# 0 - (Normal)

ProcessPriority = 0

#

# RealmsStateUpdateDelay

# Description: Time (in seconds) between realm list updates.

# Default: 20 - (Enabled)

# 0 - (Disabled)

RealmsStateUpdateDelay = 20

#

# WrongPass.MaxCount

# Description: Number of login attemps with wrong password before the account or IP will be

# banned.

# Default: 0 - (Disabled)

# 1+ - (Enabled)

WrongPass.MaxCount = 0

#

# WrongPass.BanTime

# Description: Time (in seconds) for banning account or IP for invalid login attempts.

# Default: 600 - (10 minutes)

# 0 - (Permanent ban)

WrongPass.BanTime = 600

#

# WrongPass.BanType

# Description: Ban type for invalid login attempts.

# Default: 0 - (Ban IP)

# 1 - (Ban Account)

WrongPass.BanType = 0

#

###################################################################################################

###################################################################################################

# MYSQL SETTINGS

#

# LoginDatabaseInfo

# Description: Database connection settings for the realm server.

# Example: "hostname;port;username;password;database"

# ".;somenumber;username;password;database" - (Use named pipes on Windows

# "enable-named-pipe" to [mysqld]

# section my.ini)

# ".;/path/to/unix_socket;username;password;database" - (use Unix sockets on

# Unix/Linux)

# Default: "127.0.0.1;3306;trinity;trinity;auth"

LoginDatabaseInfo = "127.0.0.1;3306;root;ascent;auth"

#

# LoginDatabase.WorkerThreads

# Description: The amount of worker threads spawned to handle asynchronous (delayed) MySQL

# statements. Each worker thread is mirrored with its own connection to the

# Default: 1

LoginDatabase.WorkerThreads = 1

#

###################################################################################################

###################################################################################################

#

# Logging system options.

#

# Appender config values: Given a appender "name"

# Appender.name

# Description: Defines 'where to log'

# Format: Type,LogLevel,Flags,optional1,optional2

#

# Type

# 0 - (None)

# 1 - (Console)

# 2 - (File)

# 3 - (DB)

#

# LogLevel

# 0 - (Disabled)

# 1 - (Trace)

# 2 - (Debug)

# 3 - (Info)

# 4 - (Warn)

# 5 - (Error)

# 6 - (Fatal)

#

# Flags:

# 0 - None

# 1 - Prefix Timestamp to the text

# 2 - Prefix Log Level to the text

# 4 - Prefix Log Filter type to the text

# 8 - Append timestamp to the log file name. Format: YYYY-MM-DD_HH-MM-SS (Only used with Type = 2)

# 16 - Make a backup of existing file before overwrite (Only used with Mode = w)

#

# Colors (read as optional1 if Type = Console)

# Format: "fatal error warn info debug trace"

# 0 - BLACK

# 1 - RED

# 2 - GREEN

# 3 - BROWN

# 4 - BLUE

# 5 - MAGENTA

# 6 - CYAN

# 7 - GREY

# 8 - YELLOW

# 9 - LRED

# 10 - LGREEN

# 11 - LBLUE

# 12 - LMAGENTA

# 13 - LCYAN

# 14 - WHITE

# Example: "13 11 9 5 3 1"

#

# File: Name of the file (read as optional1 if Type = File)

# Allows to use one "%s" to create dynamic files

#

# Mode: Mode to open the file (read as optional2 if Type = File)

# a - (Append)

# w - (Overwrite)

#

Appender.Console=1,2,0

Appender.Auth=2,2,0,Auth.log,w

# LogLevel

# 0 - (Disabled)

# 1 - (Trace)

# 2 - (Debug)

# 3 - (Info)

# 4 - (Warn)

# 5 - (Error)

# 6 - (Fatal)

#

# AppenderList: List of appenders linked to logger

# (Using spaces as separator).

#

# Appenders

# Description: List of Appenders to read from config

# (Using spaces as separator).

# Default: "Console Server"

Appenders=Console Auth

# Logger config values: Given a logger "name"

# Logger.name

# Description: Defines 'What to log'

# Format: Type,LogLevel,AppenderList

# Type

# 0 - Default. Each type that has no config will

# rely on this one. Core will create this logger

# (disabled) if it's not configured

# 7 - Network input/output,

# 30 - Authserver

Logger.Root=0,3,Console Auth

#

# Loggers

# Description: List of Loggers to read from config

# (Using spaces as separator).

# Default: "root"

Loggers=Root

World:

################################################

# Trinity Core World Server configuration file #

################################################

[worldserver]

###################################################################################################

# SECTION INDEX

#

# EXAMPLE CONFIG

# CONNECTIONS AND DIRECTORIES

# PERFORMANCE SETTINGS

# SERVER LOGGING

# SERVER SETTINGS

# WARDEN SETTINGS

# PLAYER INTERACTION

# CREATURE SETTINGS

# CHAT SETTINGS

# GAME MASTER SETTINGS

# VISIBILITY AND DISTANCES

# SERVER RATES

# AUTO BROADCAST

# BATTLEGROUND CONFIG

# BATTLEFIELD CONFIG

# ARENA CONFIG

# NETWORK CONFIG

# CONSOLE AND REMOTE ACCESS

# CHARACTER DELETE OPTIONS

# CUSTOM SERVER OPTIONS

#

###################################################################################################

###################################################################################################

# EXAMPLE CONFIG

#

# Variable

# Description: Brief description what the variable is doing.

# Important: Annotation for important things about this variable.

# Example: "Example, i.e. if the value is a string"

# Default: 10 - (Enabled|Comment|Variable name in case of grouped config options)

# 0 - (Disabled|Comment|Variable name in case of grouped config options)

#

# Note to developers:

# - Copy this example to keep the formatting.

# - Line breaks should be at column 100.

###################################################################################################

###################################################################################################

# CONNECTIONS AND DIRECTORIES

#

# RealmID

# Description: ID of the Realm using this config.

# Important: RealmID must match the realmlist inside the auth database.

# Default: 1

RealmID = 1

#

# DataDir

# Description: Data directory setting.

# Important: DataDir needs to be quoted, as the string might contain space characters.

# Example: "@prefix@/share/trinitycore"

# Default: "."

DataDir = "."

#

# LogsDir

# Description: Logs directory setting.

# Important: LogsDir needs to be quoted, as the string might contain space characters.

# Logs directory must exists, or log file creation will be disabled.

# Default: "" - (Log files will be stored in the current path)

LogsDir = "logs"

#

# LoginDatabaseInfo

# WorldDatabaseInfo

# CharacterDatabaseInfo

# Description: Database connection settings for the world server.

# Example: "hostname;port;username;password;database"

# ".;somenumber;username;password;database" - (Use named pipes on Windows

# "enable-named-pipe" to [mysqld]

# section my.ini)

# ".;/path/to/unix_socket;username;password;database" - (use Unix sockets on

# Unix/Linux)

# Default: "127.0.0.1;3306;trinity;trinity;auth" - (LoginDatabaseInfo)

# "127.0.0.1;3306;trinity;trinity;world" - (WorldDatabaseInfo)

# "127.0.0.1;3306;trinity;trinity;characters" - (CharacterDatabaseInfo)

LoginDatabaseInfo = "127.0.0.1;3306;root;ascent;auth"

WorldDatabaseInfo = "127.0.0.1;3306;root;ascent;world"

CharacterDatabaseInfo = "127.0.0.1;3306;root;ascent;characters"

#

# LoginDatabase.WorkerThreads

# WorldDatabase.WorkerThreads

# CharacterDatabase.WorkerThreads

# Description: The amount of worker threads spawned to handle asynchronous (delayed) MySQL

# statements. Each worker thread is mirrored with its own connection to the

# MySQL server and their own thread on the MySQL server.

# Default: 1 - (LoginDatabase.WorkerThreads)

# 1 - (WorldDatabase.WorkerThreads)

# 1 - (CharacterDatabase.WorkerThreads)

LoginDatabase.WorkerThreads = 1

WorldDatabase.WorkerThreads = 1

CharacterDatabase.WorkerThreads = 1

#

# LoginDatabase.SynchThreads

# WorldDatabase.SynchThreads

# CharacterDatabase.SynchThreads

# Description: The amount of MySQL connections spawned to handle.

# Default: 1 - (LoginDatabase.WorkerThreads)

# 1 - (WorldDatabase.WorkerThreads)

# 2 - (CharacterDatabase.WorkerThreads)

LoginDatabase.SynchThreads = 1

WorldDatabase.SynchThreads = 1

CharacterDatabase.SynchThreads = 2

#

# MaxPingTime

# Description: Time (in minutes) between database pings.

# Default: 30

MaxPingTime = 30

#

# WorldServerPort

# Description: TCP port to reach the world server.

# Default: 8085

WorldServerPort = 8085

#

# BindIP

# Description: Bind world server to IP/hostname

# Default: "0.0.0.0" - (Bind to all IPs on the system)

BindIP = "0.0.0.0"

#

###################################################################################################

###################################################################################################

# PERFORMANCE SETTINGS

#

# UseProcessors

# Description: Processors mask for Windows based multi-processor systems.

# Default: 0 - (Selected by OS)

# 1+ - (Bit mask value of selected processors)

UseProcessors = 0

#

# ProcessPriority

# Description: Process priority setting for Windows based systems.

# Default: 1 - (High)

# 0 - (Normal)

ProcessPriority = 1

#

# Compression

# Description: Compression level for client update packages

# Range: 1-9

# Default: 1 - (Speed)

# 9 - (Best compression)

Compression = 1

#

# PlayerLimit

# Description: Maximum number of players in the world. Excluding Mods, GMs and Admins.

# Important: If you want to block players and only allow Mods, GMs or Admins to join the

# server, use the DB field "auth.realmlist.allowedSecurityLevel".

# Default: 100 - (Enabled)

# 1+ - (Enabled)

# 0 - (Disabled, No limit)

PlayerLimit = 100

#

# SaveRespawnTimeImmediately

# Description: Save respawn time for creatures at death and gameobjects at use/open.

# Default: 1 - (Enabled, Save respawn time immediately)

# 0 - (Disabled, Save respawn time at grid unloading)

SaveRespawnTimeImmediately = 1

#

# MaxOverspeedPings

# Description: Maximum overspeed ping count before character is disconnected.

# Default: 2 - (Enabled, Minimum value)

# 3+ - (Enabled, More checks before kick)

# 0 - (Disabled)

MaxOverspeedPings = 2

#

# GridUnload

# Description: Unload grids to save memory. Can be disabled if enough memory is available

# to speed up moving players to new grids.

# Default: 1 - (enable, Unload grids)

# 0 - (disable, Do not unload grids)

GridUnload = 1

#

# SocketTimeOutTime

# Description: Time (in milliseconds) after which a connection being idle on the character

# selection screen is disconnected.

# Default: 900000 - (15 minutes)

SocketTimeOutTime = 900000

#

# SessionAddDelay

# Description: Time (in microseconds) that a network thread will sleep after authentication

# protocol handling before adding a connection to the world session map.

# Default: 10000 - (10 milliseconds, 0.01 second)

SessionAddDelay = 10000

#

# GridCleanUpDelay

# Description: Time (in milliseconds) grid clean up delay.

# Default: 300000 - (5 minutes)

GridCleanUpDelay = 300000

#

# MapUpdateInterval

# Description: Time (milliseconds) for map update interval.

# Default: 100 - (0.1 second)

MapUpdateInterval = 100

#

# ChangeWeatherInterval

# Description: Time (in milliseconds) for weather update interval.

# Default: 600000 - (10 min)

ChangeWeatherInterval = 600000

#

# PlayerSaveInterval

# Description: Time (in milliseconds) for player save interval.

# Default: 900000 - (15 min)

PlayerSaveInterval = 900000

#

# PlayerSave.Stats.MinLevel

# Description: Minimum level for saving character stats in the database for external usage.

# Default: 0 - (Disabled, Do not save character stats)

# 1+ - (Enabled, Level beyond which character stats are saved)

PlayerSave.Stats.MinLevel = 0

#

# PlayerSave.Stats.SaveOnlyOnLogout

# Description: Save player stats only on logout.

# Default: 1 - (Enabled, Only save on logout)

# 0 - (Disabled, Save on every player save)

PlayerSave.Stats.SaveOnlyOnLogout = 1

#

# vmap.enableLOS

# vmap.enableHeight

# Description: VMmap support for line of sight and height calculation.

# Default: 1 - (Enabled, vmap.enableLOS)

# 1 - (Enabled, vmap.enableHeight)

# 0 - (Disabled)

vmap.enableLOS = 1

vmap.enableHeight = 1

#

# vmap.ignoreSpellIds

# Description: These spells are ignored for LoS calculation.

# List of ids with delimiter ','.

# Example: "7720,1337"

# Default: "7720"

vmap.ignoreSpellIds = "7720"

#

# vmap.petLOS

# Description: Check line of sight for pets, to avoid them attacking through walls.

# Default: 1 - (Enabled, each pet attack will be checked for line of sight)

# 0 - (Disabled, somewhat less CPU usage)

vmap.petLOS = 1

#

# vmap.enableIndoorCheck

# Description: VMap based indoor check to remove outdoor-only auras (mounts etc.).

# Default: 1 - (Enabled)

# 0 - (Disabled, somewhat less CPU usage)

vmap.enableIndoorCheck = 1

#

# DetectPosCollision

# Description: Check final move position, summon position, etc for visible collision with

# other objects or walls (walls only if vmaps are enabled).

# Default: 1 - (Enabled)

# 0 - (Disabled, Less position precision but less CPU usage)

DetectPosCollision = 1

#

# TargetPosRecalculateRange

# Description: Max distance from movement target point (+moving unit size) and targeted

# object (+size) after that new target movement point calculated.

# Range: 0.5-5.0

# Default: 1.5

# 0.5 - (Minimum, Contact Range, More sensitive reaction to target movement)

# 5.0 - (Maximum, Melee attack range, Less CPU usage)

TargetPosRecalculateRange = 1.5

#

# UpdateUptimeInterval

# Description: Update realm uptime period (in minutes).

# Default: 10 - (10 minutes)

# 1+

UpdateUptimeInterval = 10

#

# LogDB.Opt.ClearInterval

# Description: Time (in minutes) for the WUPDATE_CLEANDB timer that clears the `logs` table

# of old entries.

# Default: 10 - (10 minutes)

# 1+

LogDB.Opt.ClearInterval = 10

#

# LogDB.Opt.ClearTime

# Description: Time (in seconds) for keeping old `logs` table entries.

# Default: 1209600 - (Enabled, 14 days)

# 0 - (Disabled, Do not clear entries)

LogDB.Opt.ClearTime = 1209600

#

# MaxCoreStuckTime

# Description: Time (in seconds) before the server is forced to crash if it is frozen.

# Default: 0 - (Disabled)

# 10+ - (Enabled, Recommended 10+)

MaxCoreStuckTime = 0

#

# AddonChannel

# Description: Configure the use of the addon channel through the server (some client side

# addons will not work correctly with disabled addon channel)

# Default: 1 - (Enabled)

# 0 - (Disabled)

AddonChannel = 1

#

# MapUpdate.Threads

# Description: Number of threads to update maps.

# Default: 1

MapUpdate.Threads = 1

#

# CleanCharacterDB

# Description: Clean out deprecated achievements, skills, spells and talents from the db.

# Default: 0 - (Disabled)

# 1 - (Enable)

CleanCharacterDB = 0

#

# PersistentCharacterCleanFlags

# Description: Determines the character clean flags that remain set after cleanups.

# This is a bitmask value, check /doc/CharacterDBCleanup.txt for more

# information.

# Example: 14 - (Cleaning up skills, talents and spells will remain enabled after the

# next cleanup)

# Default: 0 - (All cleanup methods will be disabled after the next cleanup)

PersistentCharacterCleanFlags = 0

#

###################################################################################################

###################################################################################################

# SERVER LOGGING

#

# PidFile

# Description: World daemon PID file

# Example: "./worldd.pid" - (Enabled)

# Default: "" - (Disabled)

PidFile = ""

#

# PacketLogFile

# Description: Binary packet logging file for the world server.

# Filename extension must be .bin to be parsable with WowPacketParser.

# Example: "World.bin" - (Enabled)

# Default: "" - (Disabled)

PacketLogFile = ""

#

# ChatLogs.Channel

# Description: Log custom channel chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Channel = 1

#

# ChatLogs.Whisper

# Description: Log whispers between players.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Whisper = 1

#

# ChatLogs.SysChan

# Description: Log system channel messages.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.SysChan = 1

#

# ChatLogs.Party

# Description: Log party chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Party = 1

#

# ChatLogs.Raid

# Description: Log raid chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Raid = 1

#

# ChatLogs.Guild

# Description: Log guild chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Guild = 1

#

# ChatLogs.Public

# Description: Log public chat (say/yell/emote).

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Public = 1

#

# ChatLogs.Addon

# Description: Log addon messages.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.Addon = 1

#

# ChatLogs.BattleGround

# Description: Log battleground chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatLogs.BattleGround = 1

# Extended Logging system configuration moved to end of file (on purpose)

#

###################################################################################################

###################################################################################################

# SERVER SETTINGS

#

# GameType

# Description: Server realm type.

# Default: 0 - (NORMAL)

# 1 - (PVP)

# 4 - (NORMAL)

# 6 - (RP)

# 8 - (RPPVP)

# 16 - (FFA_PVP, Free for all pvp mode like arena PvP in all zones except rest

# activated places and sanctuaries)

GameType = 0

#

# RealmZone

# Description: Server realm zone. Set allowed alphabet in character, etc. names.

# Default 1 - (Development - any language)

# 2 - (United States - extended-Latin)

# 3 - (Oceanic - extended-Latin)

# 4 - (Latin America - extended-Latin)

# 5 - (Tournament - basic-Latin at create, any at login)

# 6 - (Korea - East-Asian)

# 7 - (Tournament - basic-Latin at create, any at login)

# 8 - (English - extended-Latin)

# 9 - (German - extended-Latin)

# 10 - (French - extended-Latin)

# 11 - (Spanish - extended-Latin)

# 12 - (Russian - Cyrillic)

# 13 - (Tournament - basic-Latin at create, any at login)

# 14 - (Taiwan - East-Asian)

# 15 - (Tournament - basic-Latin at create, any at login)

# 16 - (China - East-Asian)

# 17 - (CN1 - basic-Latin at create, any at login)

# 18 - (CN2 - basic-Latin at create, any at login)

# 19 - (CN3 - basic-Latin at create, any at login)

# 20 - (CN4 - basic-Latin at create, any at login)

# 21 - (CN5 - basic-Latin at create, any at login)

# 22 - (CN6 - basic-Latin at create, any at login)

# 23 - (CN7 - basic-Latin at create, any at login)

# 24 - (CN8 - basic-Latin at create, any at login)

# 25 - (Tournament - basic-Latin at create, any at login)

# 26 - (Test Server - any language)

# 27 - (Tournament - basic-Latin at create, any at login)

# 28 - (QA Server - any language)

# 29 - (CN9 - basic-Latin at create, any at login)

RealmZone = 1

#

# StrictPlayerNames

# Description: Limit player name to language specific symbol set. Prevents character

# creation and forces rename request if not allowed symbols are used

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictPlayerNames = 0

#

# StrictCharterNames

# Description: Limit guild/arena team charter names to language specific symbol set.

# Prevents charter creation if not allowed symbols are used.

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictCharterNames = 0

#

# StrictPetNames

# Description: Limit pet names to language specific symbol set.

# Prevents pet naming if not allowed symbols are used.

# Default: 0 - (Disable, Limited server timezone dependent client check)

# 1 - (Enabled, Strictly basic Latin characters)

# 2 - (Enabled, Strictly realm zone specific, See RealmZone setting,

# Note: Client needs to have the appropriate fonts installed which support

# the charset. For non-official localization, custom fonts need to be

# placed in clientdir/Fonts.

# 3 - (Enabled, Basic Latin characters + server timezone specific)

StrictPetNames = 0

#

# DBC.Locale

# Description: DBC language settings.

# Default: 255 - (Auto Detect)

# 0 - (English)

# 1 - (Korean)

# 2 - (French)

# 3 - (German)

# 4 - (Chinese)

# 5 - (Taiwanese)

# 6 - (Spanish)

# 7 - (Spanish Mexico)

# 8 - (Russian)

DBC.Locale = 255

#

# DeclinedNames

# Description: Allow Russian clients to set and use declined names.

# Default: 0 - (Disabled, Except when the Russian RealmZone is set)

# 1 - (Enabled)

DeclinedNames = 0

#

# Expansion

# Description: Allow server to use content from expansions. Checks for expansion-related

# map files, client compatibility and class/race character creation.

# Default: 2 - (Expansion 2)

# 1 - (Expansion 1)

# 0 - (Disabled, Ignore and disable expansion content (maps, races, classes)

Expansion = 2

#

# MinPlayerName

# Description: Minimal player name length.

# Range: 1-12

# Default: 2

MinPlayerName = 2

#

# MinCharterName

# Description: Minimal charter name length.

# Range: 1-24

# Default: 2

MinCharterName = 2

#

# MinPetName

# Description: Minimal pet name length.

# Range: 1-12

# Default: 2

MinPetName = 2

#

# MaxWhoListReturns

# Description: Set the max number of players returned in the /who list and interface.

# Default: 49 - (stable)

MaxWhoListReturns = 49

#

# CharacterCreating.Disabled

# Description: Disable character creation for players based on faction.

# Default: 0 - (Enabled, All factions are allowed)

# 1 - (Disabled, Alliance)

# 2 - (Disabled, Horde)

# 3 - (Disabled, Both factions)

CharacterCreating.Disabled = 0

#

# CharacterCreating.Disabled.RaceMask

# Description: Mask of races which cannot be created by players.

# Example: 1536 - (1024 + 512, Blood Elf and Draenei races are disabled)

# Default: 0 - (Enabled, All races are allowed)

# 1 - (Disabled, Human)

# 2 - (Disabled, Orc)

# 4 - (Disabled, Dwarf)

# 8 - (Disabled, Night Elf)

# 16 - (Disabled, Undead)

# 32 - (Disabled, Tauren)

# 64 - (Disabled, Gnome)

# 128 - (Disabled, Troll)

# 512 - (Disabled, Blood Elf)

# 1024 - (Disabled, Draenei)

CharacterCreating.Disabled.RaceMask = 0

#

# CharacterCreating.Disabled.ClassMask

# Description: Mask of classes which cannot be created by players.

# Example: 288 - (32 + 256, Death Knight and Warlock classes are disabled)

# Default: 0 - (Enabled, All classes are allowed)

# 1 - (Disabled, Warrior)

# 2 - (Disabled, Paladin)

# 4 - (Disabled, Hunter)

# 8 - (Disabled, Rogue)

# 16 - (Disabled, Undead)

# 32 - (Disabled, Death Knight)

# 64 - (Disabled, Shaman)

# 128 - (Disabled, Mage)

# 256 - (Disabled, Warlock)

# 1024 - (Disabled, Druid)

CharacterCreating.Disabled.ClassMask = 0

#

# CharactersPerAccount

# Description: Limit number of characters per account on all realms on this realmlist.

# Important: Number must be >= CharactersPerRealm

# Default: 50

CharactersPerAccount = 50

#

# CharactersPerRealm

# Description: Limit number of characters per account on this realm.

# Range: 1-10

# Default: 10 - (Client limitation)

CharactersPerRealm = 10

#

# HeroicCharactersPerRealm

# Description: Limit number of heroic class characters per account on this realm.

# Range: 1-10

# Default: 1

HeroicCharactersPerRealm = 1

#

# CharacterCreating.MinLevelForHeroicCharacter

# Description: Limit creating heroic characters only for account with another

# character of specific level (ignored for GM accounts)

# Default: 55 - (Enabled, Requires at least another level 55 character)

# 0 - (Disabled)

# 1 - (Enabled, Requires at least another level 1 character)

CharacterCreating.MinLevelForHeroicCharacter = 55

#

# SkipCinematics

# Description: Disable cinematic intro at first login after character creation.

# Prevents buggy intros in case of custom start location coordinates.

# Default: 0 - (Show intro for each new character)

# 1 - (Show intro only for first character of selected race)

# 2 - (Disable intro for all classes)

SkipCinematics = 0

#

# MaxPlayerLevel

# Description: Maximum level that can be reached by players.

# Important: Levels beyond 100 are not recommended at all.

# Range: 1-255

# Default: 80

MaxPlayerLevel = 80

#

# MinDualSpecLevel

# Description: Level requirement for Dual Talent Specialization

# Default: 40

MinDualSpecLevel = 40

#

# StartPlayerLevel

# Description: Starting level for characters after creation.

# Range: 1-MaxPlayerLevel

# Default: 1

StartPlayerLevel = 80

#

# StartHeroicPlayerLevel

# Description: Staring level for heroic class characters after creation.

# Range: 1-MaxPlayerLevel

# Default: 55

StartHeroicPlayerLevel = 80

#

# StartPlayerMoney

# Description: Amount of money (in Copper) that a character has after creation.

# Default: 0

# 100 - (1 Silver)

StartPlayerMoney = 3000000

#

# MaxHonorPoints

# Description: Maximum honor points a character can have.

# Default: 75000

MaxHonorPoints = 75000

#

# StartHonorPoints

# Description: Amount of honor points that characters have after creation.

# Default: 0

StartHonorPoints = 0

#

# MaxArenaPoints

# Description: Maximum arena points a character can have.

# Default: 10000

MaxArenaPoints = 10000

#

# StartArenaPoints

# Description: Amount of arena points that characters has after creation.

# Default: 0

StartArenaPoints = 0

#

# RecruitAFriend.MaxLevel

# Description: Highest level up to which a character can benefit from the Recruit-A-Friend

# experience multiplier.

# Default: 60

RecruitAFriend.MaxLevel = 60

#

# RecruitAFriend.MaxDifference

# Description: Highest level difference between linked Recruiter and Friend benefit from

# the Recruit-A-Friend experience multiplier.

# Default: 4

RecruitAFriend.MaxDifference = 4

#

# InstantLogout

# Description: Required security level for instantly logging out everywhere.

# Does not work while in combat, dueling or falling.

# Default: 1 - (Enabled, Mods/GMs/Admins)

# 0 - (Enabled, Everyone)

# 2 - (Enabled, GMs/Admins)

# 3 - (Enabled, Admins)

# 4 - (Disabled)

InstantLogout = 1

#

# DisableWaterBreath

# Description: Required security level for water breathing.

# Default: 4 - (Disabled)

# 0 - (Enabled, Everyone)

# 1 - (Enabled, Mods/GMs/Admins)

# 2 - (Enabled, GMs/Admins)

# 3 - (Enabled, Admins)

DisableWaterBreath = 4

#

# AllFlightPaths

# Description: Character knows all flight paths (of both factions) after creation.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllFlightPaths = 0

#

# InstantFlightPaths

# Description: Flight paths will take players to their destination instantly instead

# of making them wait while flying.

# Default: 0 - (Disabled)

# 1 - (Enabled)

InstantFlightPaths = 0

#

# AlwaysMaxSkillForLevel

# Description: Players will automatically gain max skill level when logging in or leveling

# up.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AlwaysMaxSkillForLevel = 0

#

# ActivateWeather

# Description: Activate the weather system.

# Default: 1 - (Enabled)

# 0 - (Disabled)

ActivateWeather = 1

#

# CastUnstuck

# Description: Allow casting the Unstuck spell using .start or unstuck button in client

# help options.

# Default: 1 - (Enabled)

# 0 - (Disabled)

CastUnstuck = 1

#

# Instance.IgnoreLevel

# Description: Ignore level requirement when entering instances.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Instance.IgnoreLevel = 0

#

# Instance.IgnoreRaid

# Description: Ignore raid group requirement when entering instances.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Instance.IgnoreRaid = 0

#

# Instance.ResetTimeHour

# Description: Hour of the day when the global instance reset occurs.

# Range: 0-23

# Default: 4 - (04:00 AM)

Instance.ResetTimeHour = 4

#

# Instance.UnloadDelay

# Description: Time (in milliseconds) before instance maps are unloaded from memory if no

# characters are inside.

# Default: 1800000 - (Enabled, 30 minutes)

# 0 - (Disabled, Instance maps are kept in memory until the instance

# resets)

Instance.UnloadDelay = 1800000

#

# Quests.LowLevelHideDiff

# Description: Level difference between player and quest level at which quests are

# considered low-level and are not shown via exclamation mark (!) at quest

# givers.

# Default: 4 - (Enabled, Hide quests that have 4 levels less than the character)

# -1 - (Disabled, Show all available quest marks)

Quests.LowLevelHideDiff = 4

#

# Quests.HighLevelHideDiff

# Description: Level difference between player and quest level at which quests are

# considered high-level and are not shown via exclamation mark (!) at quest

# givers.

# Default: 7 - (Enabled, Hide quests that have 7 levels more than the character)

# -1 - (Disabled, Show all available quest marks)

Quests.HighLevelHideDiff = 7

#

# Quests.IgnoreRaid

# Description: Allow non-raid quests to be completed while in a raid group.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Quests.IgnoreRaid = 0

#

# Quests.IgnoreAutoAccept

# Description: Ignore auto accept flag. Clients will have to manually accept all quests.

# Default: 0 - (Disabled, DB values determine if quest is marked auto accept or not.)

# 1 - (Enabled, clients will not be told to automatically accept any quest.)

Quests.IgnoreAutoAccept = 0

#

# Quests.IgnoreAutoComplete

# Description: Ignore auto complete flag. Clients will have to manually complete all quests.

# Default: 0 - (Disabled, DB values determine if quest is marked auto complete or not.)

# 1 - (Enabled, clients will not be told to automatically complete any quest.)

Quests.IgnoreAutoComplete = 0

#

# Guild.EventLogRecordsCount

# Description: Number of log entries for guild events that are stored per guild. Old entries

# will be overwritten if the number of log entries exceed the configured value.

# High numbers prevent this behavior but may have performance impacts.

# Default: 100

Guild.EventLogRecordsCount = 100

#

# Guild.BankEventLogRecordsCount

# Description: Number of log entries for guild bank events that are stored per guild. Old

# entries will be overwritten if the number of log entries exceed the

# configured value. High numbers prevent this behavior but may have performance

# impacts.

# Default: 25 - (Minimum)

Guild.BankEventLogRecordsCount = 25

#

# MaxPrimaryTradeSkill

# Description: Maximum number of primary professions a character can learn.

# Range: 0-10

# Default: 2

MaxPrimaryTradeSkill = 2

#

# MinPetitionSigns

# Description: Number of required signatures on charters to create a guild.

# Range: 0-9

# Default: 9

MinPetitionSigns = 9

#

# MaxGroupXPDistance

# Description: Max distance to creature for group member to get experience at creature

# death.

# Default: 74

MaxGroupXPDistance = 74

#

# MaxRecruitAFriendBonusDistance

# Description: Max distance between character and and group to gain the Recruit-A-Friend

# XP multiplier.

# Default: 100

MaxRecruitAFriendBonusDistance = 100

#

# MailDeliveryDelay

# Description: Time (in seconds) mail delivery is delayed when sending items.

# Default: 3600 - (1 hour)

MailDeliveryDelay = 3600

#

# SkillChance.Prospecting

# Description: Allow skill increase from prospecting.

# Default: 0 - (Disabled)

# 1 - (Enabled)

SkillChance.Prospecting = 0

#

# SkillChance.Milling

# Description: Allow skill increase from milling.

# Default: 0 - (Disabled)

# 1 - (Enabled)

SkillChance.Milling = 0

#

# OffhandCheckAtSpellUnlearn

# Description: Unlearning certain spells can change offhand weapon restrictions

# for equip slots.

# Default: 1 - (Recheck offhand slot weapon at unlearning a spell)

# 0 - (Recheck offhand slot weapon only at zone update)

OffhandCheckAtSpellUnlearn = 1

#

# ClientCacheVersion

# Description: Client cache version for client cache data reset. Use any value different

# from DB and not recently been used to trigger client side cache reset.

# Default: 0 - (Use DB value from world DB db_version.cache_id field)

ClientCacheVersion = 0

#

# Event.Announce

# Description: Announce events.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Event.Announce = 0

#

# BeepAtStart

# Description: Beep when the world server finished starting (Unix/Linux systems).

# Default: 1 - (Enabled)

# 0 - (Disabled)

BeepAtStart = 1

#

# Motd

# Description: Message of the Day, displayed at login.

# Use '@' for a newline and be sure to escape special characters.

# Example: "Welcome to John's [email protected] server runs on Trinity Core."

# Default: "Welcome to a Trinity Core server."

Motd = ">mfw i can't greentext on here."

#

# Server.LoginInfo

# Description: Display core version (.server info) on login.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Server.LoginInfo = 0

#

# Command.LookupMaxResults

# Description: Number of results being displayed using a .lookup command.

# Default: 0 - (Unlimited)

Command.LookupMaxResults = 0

#

# AllowTickets

# Description: Allow/disallow sending new tickets.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowTickets = 1

#

# DungeonFinder.Enable

# Description: Dungeon and raid finder system.

# Default: 1 - (Enabled)

# 0 - (Disabled)

DungeonFinder.Enable = 1

#

# DBC.EnforceItemAttributes

# Description: Disallow overriding item attributes stored in DBC files with values from the

# database.

# Default: 1 - (Enabled, Enforce DBC values)

# 0 - (Disabled, Use database values)

DBC.EnforceItemAttributes = 1

#

# AccountInstancesPerHour

# Description: Controls the max amount of different instances player can enter within hour

# Default: 5

AccountInstancesPerHour = 5

#

###################################################################################################

###################################################################################################

# WARDEN SETTINGS

#

# Warden.Enabled

# Description: Enable Warden anticheat system.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Warden.Enabled = 0

#

# Warden.NumMemChecks

# Description: Number of Warden memory checks that are sent to the client each cycle.

# Default: 3 - (Enabled)

# 0 - (Disabled)

Warden.NumMemChecks = 3

#

# Warden.NumOtherChecks

# Description: Number of Warden checks other than memory checks that are added to request

# each checking cycle.

# Default: 7 - (Enabled)

# 0 - (Disabled)

Warden.NumOtherChecks = 7

#

# Warden.ClientResponseDelay

# Description: Time (in seconds) before client is getting disconnecting for not responding.

# Default: 600 - (10 Minutes)

# 0 - (Disabled, client won't be kicked)

Warden.ClientResponseDelay = 600

#

# Warden.ClientCheckHoldOff

# Description: Time (in seconds) to wait before sending the next check request to the client.

# A low number increases traffic and load on client and server side.

# Default: 30 - (30 Seconds)

# 0 - (Send check as soon as possible)

Warden.ClientCheckHoldOff = 30

#

# Warden.ClientCheckFailAction

# Description: Default action being taken if a client check failed. Actions can be

# overwritten for each single check via warden_action table in characters

# database.

# Default: 0 - (Disabled, Logging only)

# 1 - (Kick)

# 2 - (Ban)

Warden.ClientCheckFailAction = 0

#

# Warden.BanDuration

# Description: Time (in seconds) an account will be banned if ClientCheckFailAction is set

# to ban.

# Default: 86400 - (24 hours)

# 0 - (Permanent ban)

Warden.BanDuration = 86400

#

###################################################################################################

###################################################################################################

# PLAYER INTERACTION

#

# AllowTwoSide.Accounts

# Description: Allow creating characters of both factions on the same account.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowTwoSide.Accounts = 1

#

# AllowTwoSide.Interaction.Chat

# Description: Allow say chat between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Chat = 1

#

# AllowTwoSide.Interaction.Channel

# Description: Allow channel chat between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Channel = 0

#

# AllowTwoSide.Interaction.Group

# Description: Allow group joining between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Group = 1

#

# AllowTwoSide.Interaction.Guild

# Description: Allow guild joining between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Guild = 1

#

# AllowTwoSide.Interaction.Auction

# Description: Allow auctions between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Auction = 1

#

# AllowTwoSide.Interaction.Mail

# Description: Allow sending mails between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Interaction.Mail = 1

#

# AllowTwoSide.WhoList

# Description: Show characters from both factions in the /who list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.WhoList = 1

#

# AllowTwoSide.AddFriend

# Description: Allow adding friends from other faction the friends list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.AddFriend = 1

#

# AllowTwoSide.Trade

# Description: Allow trading between factions.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AllowTwoSide.Trade = 1

#

# TalentsInspecting

# Description: Allow inspecting characters from the opposing faction.

# Doesn't affect characters in gamemaster mode.

# Default: 1 - (Enabled)

# 0 - (Disabled)

TalentsInspecting = 1

#

###################################################################################################

###################################################################################################

# CREATURE SETTINGS

#

# ThreatRadius

# Description: Distance for creatures to evade after being pulled away from the combat

# starting point. If ThreatRadius is less than creature aggro radius then aggro

# radius will be used.

# Default: 60

ThreatRadius = 60

#

# Rate.Creature.Aggro

# Description: Aggro radius percentage.

# Default: 1 - (Enabled, 100%)

# 1.5 - (Enabled, 150%)

# 0 - (Disabled, 0%)

Rate.Creature.Aggro = 1

#

# CreatureFamilyFleeAssistanceRadius

# Description: Distance for fleeing creatures seeking assistance from other creatures.

# Default: 30 - (Enabled)

# 0 - (Disabled)

CreatureFamilyFleeAssistanceRadius = 30

#

# CreatureFamilyAssistanceRadius

# Description: Distance for creatures calling for assistance from other creatures without

# moving.

# Default: 10 - (Enabled)

# 0 - (Disabled)

CreatureFamilyAssistanceRadius = 10

#

# CreatureFamilyAssistanceDelay

# Description: Time (in milliseconds) before creature assistance call.

# Default: 1500 - (1.5 Seconds)

CreatureFamilyAssistanceDelay = 1500

#

# CreatureFamilyFleeDelay

# Description: Time (in milliseconds) during which creature can flee if no assistance was

# found.

# Default: 7000 (7 Seconds)

CreatureFamilyFleeDelay = 7000

#

# WorldBossLevelDiff

# Description: World boss level difference.

# Default: 3

WorldBossLevelDiff = 3

#

# Corpse.Decay.NORMAL

# Corpse.Decay.RARE

# Corpse.Decay.ELITE

# Corpse.Decay.RAREELITE

# Corpse.Decay.WORLDBOSS

# Description: Time (in seconds) until creature corpse will decay if not looted or skinned.

# Default: 60 - (1 Minute, Corpse.Decay.NORMAL)

# 300 - (5 Minutes, Corpse.Decay.RARE)

# 300 - (5 Minutes, Corpse.Decay.ELITE)

# 300 - (5 Minutes, Corpse.Decay.RAREELITE)

# 3600 - (1 Hour, Corpse.Decay.WORLDBOSS)

Corpse.Decay.NORMAL = 60

Corpse.Decay.RARE = 300

Corpse.Decay.ELITE = 300

Corpse.Decay.RAREELITE = 300

Corpse.Decay.WORLDBOSS = 3600

#

# Rate.Corpse.Decay.Looted

# Description: Multiplier for Corpse.Decay.* to configure how long creature corpses stay

# after they have been looted.

# Default: 0.5

Rate.Corpse.Decay.Looted = 0.5

#

# Rate.Creature.Normal.Damage

# Rate.Creature.Elite.Elite.Damage

# Rate.Creature.Elite.RARE.Damage

# Rate.Creature.Elite.RAREELITE.Damage

# Rate.Creature.Elite.WORLDBOSS.Damage

# Description: Mulitplier for creature melee damage.

# Default: 1 - (Rate.Creature.Normal.Damage)

# 1 - (Rate.Creature.Elite.Elite.Damage)

# 1 - (Rate.Creature.Elite.RARE.Damage)

# 1 - (Rate.Creature.Elite.RAREELITE.Damage)

# 1 - (Rate.Creature.Elite.WORLDBOSS.Damage)

#

Rate.Creature.Normal.Damage = 1

Rate.Creature.Elite.Elite.Damage = 1

Rate.Creature.Elite.RARE.Damage = 1

Rate.Creature.Elite.RAREELITE.Damage = 1

Rate.Creature.Elite.WORLDBOSS.Damage = 1

#

# Rate.Creature.Normal.SpellDamage

# Rate.Creature.Elite.Elite.SpellDamage

# Rate.Creature.Elite.RARE.SpellDamage

# Rate.Creature.Elite.RAREELITE.SpellDamage

# Rate.Creature.Elite.WORLDBOSS.SpellDamage

# Description: Mulitplier for creature spell damage.

# Default: 1 - (Rate.Creature.Normal.SpellDamage)

# 1 - (Rate.Creature.Elite.Elite.SpellDamage)

# 1 - (Rate.Creature.Elite.RARE.SpellDamage)

# 1 - (Rate.Creature.Elite.RAREELITE.SpellDamage)

# 1 - (Rate.Creature.Elite.WORLDBOSS.SpellDamage)

Rate.Creature.Normal.SpellDamage = 1

Rate.Creature.Elite.Elite.SpellDamage = 1

Rate.Creature.Elite.RARE.SpellDamage = 1

Rate.Creature.Elite.RAREELITE.SpellDamage = 1

Rate.Creature.Elite.WORLDBOSS.SpellDamage = 1

#

# Rate.Creature.Normal.HP

# Rate.Creature.Elite.Elite.HP

# Rate.Creature.Elite.RARE.HP

# Rate.Creature.Elite.RAREELITE.HP

# Rate.Creature.Elite.WORLDBOSS.HP

# Description: Mulitplier for creature health.

# Default: 1 - (Rate.Creature.Normal.HP)

# 1 - (Rate.Creature.Elite.Elite.HP)

# 1 - (Rate.Creature.Elite.RARE.HP)

# 1 - (Rate.Creature.Elite.RAREELITE.HP)

# 1 - (Rate.Creature.Elite.WORLDBOSS.HP)

Rate.Creature.Normal.HP = 1

Rate.Creature.Elite.Elite.HP = 1

Rate.Creature.Elite.RARE.HP = 1

Rate.Creature.Elite.RAREELITE.HP = 1

Rate.Creature.Elite.WORLDBOSS.HP = 1

#

# ListenRange.Say

# Description: Distance in which players can read say messages from creatures or

# gameobjects.

# Default: 40

ListenRange.Say = 40

#

# ListenRange.TextEmote

# Description: Distance in which players can read emotes from creatures or gameobjects.

# Default: 40

ListenRange.TextEmote = 40

#

# ListenRange.Yell

# Description: Distance in which players can read yell messages from creatures or

# gameobjects.

# Default: 300

ListenRange.Yell = 300

#

###################################################################################################

###################################################################################################

# CHAT SETTINGS

#

# ChatFakeMessagePreventing

# Description: Chat protection from creating fake messages using a lot spaces or other

# invisible symbols. Not applied to the addon language, but may break old

# addons that use normal languages for sending data to other clients.

# Default: 0 - (Disabled)

# 1 - (Enabled)

ChatFakeMessagePreventing = 0

#

# ChatStrictLinkChecking.Severity

# Description: Check chat messages for ingame links to spells, items, quests, etc.

# Default: 0 - (Disabled)

# 1 - (Enabled, Check if only valid pipe commands are used, Prevents posting

# pictures.)

# 2 - (Enabled, Verify that pipe commands are used in a correct order)

# 3 - (Check if color, entry and name don't contradict each other. For this to

# work correctly, please assure that you have extracted locale DBCs of

# every language specific client playing on this server)

ChatStrictLinkChecking.Severity = 0

#

# ChatStrictLinkChecking.Kick

# Description: Defines what should be done if a message is considered to contain invalid

# pipe commands.

# Default: 0 - (Silently ignore message)

# 1 - (Disconnect players who sent malformed messages)

ChatStrictLinkChecking.Kick = 0

#

# ChatFlood.MessageCount

# Description: Chat flood protection, number of messages before player gets muted.

# Default: 10 - (Enabled)

# 0 - (Disabled)

ChatFlood.MessageCount = 10

#

# ChatFlood.MessageDelay

# Description: Time (in seconds) between messages to be counted into ChatFlood.MessageCount.

# Default: 1

ChatFlood.MessageDelay = 1

#

# ChatFlood.MuteTime

# Description: Time (in seconds) characters get muted for violating ChatFlood.MessageCount.

# Default: 10

ChatFlood.MuteTime = 10

#

# Channel.RestrictedLfg

# Description: Restrict LookupForGroup channel to characters registered in the LFG tool.

# Default: 1 - (Enabled, Allow join to channel only if registered in LFG)

# 0 - (Disabled, Allow join to channel in any time)

Channel.RestrictedLfg = 1

#

# Channel.SilentlyGMJoin

# Description: Silently join GM characters to channels. If set to 1, channel kick and ban

# commands issued by a GM will not be broadcasted.

# Default: 0 - (Disabled, Join with announcement)

# 1 - (Enabled, Join without announcement)

Channel.SilentlyGMJoin = 0

#

# ChatLevelReq.Channel

# Description: Level requirement for characters to be able to write in chat channels.

# Default: 1

ChatLevelReq.Channel = 1

#

# ChatLevelReq.Whisper

# Description: Level requirement for characters to be able to whisper other characters.

# Default: 1

ChatLevelReq.Whisper = 1

#

# ChatLevelReq.Say

# Description: Level requirement for characters to be able to use say/yell/emote.

# Default: 1

ChatLevelReq.Say = 1

#

# AllowPlayerCommands

# Description: Allow players to use commands.

# Default: 1 - (Enabled)

# 0 - (Disabled)

AllowPlayerCommands = 1

#

# PreserveCustomChannels

# Description: Store custom chat channel settings like password, automatic ownership handout

# or ban list in the database. Needs to be enabled to save custom

# world/trade/etc. channels that have automatic ownership handout disabled.

# (.channel set ownership $channel off)

# Default: 0 - (Disabled, Blizzlike, Channel settings are lost if last person left)

# 1 - (Enabled)

PreserveCustomChannels = 1

#

# PreserveCustomChannelDuration

# Description: Time (in days) that needs to pass before the customs chat channels get

# cleaned up from the database. Only channels with ownership handout enabled

# (default behavior) will be cleaned.

# Default: 14 - (Enabled, Clean channels that haven't been used for 14 days)

# 0 - (Disabled, Infinite channel storage)

PreserveCustomChannelDuration = 14

#

###################################################################################################

###################################################################################################

# GAME MASTER SETTINGS

#

# GM.LoginState

# Description: GM mode at login.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.LoginState = 2

#

# GM.Visible

# Description: GM visibility at login.

# Default: 2 - (Last save state)

# 0 - (Invisible)

# 1 - (Visible)

GM.Visible = 2

#

# GM.Chat

# Description: GM chat mode at login.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.Chat = 2

#

# GM.WhisperingTo

# Description: Is GM accepting whispers from player by default or not.

# Default: 2 - (Last save state)

# 0 - (Disable)

# 1 - (Enable)

GM.WhisperingTo = 2

#

# GM.InGMList.Level

# Description: Maximum GM level shown in GM list (if enabled) in non-GM state (.gm off).

# Default: 3 - (Anyone)

# 0 - (Only players)

# 1 - (Only moderators)

# 2 - (Only gamemasters)

GM.InGMList.Level = 3

#

# GM.InWhoList.Level

# Description: Max GM level showed in who list (if visible).

# Default: 3 - (Anyone)

# 0 - (Only players)

# 1 - (Only moderators)

# 2 - (Only gamemasters)

GM.InWhoList.Level = 3

#

# GM.LogTrade

# Description: Include GM trade and trade slot enchanting operations in GM log.

# Default: 1 - (Enabled)

# 0 - (Disabled)

GM.LogTrade = 1

#

# GM.StartLevel

# Description: GM character starting level.

# Default: 1

GM.StartLevel = 80

#

# GM.AllowInvite

# Description: Allow players to invite GM characters.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.AllowInvite = 0

#

# GM.AllowFriend

# Description: Allow players to add GM characters to their friends list.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.AllowFriend = 0

#

# GM.LowerSecurity

# Description: Allow lower security levels to use commands on higher security level

# characters.

# Default: 0 - (Disabled)

# 1 - (Enabled)

GM.LowerSecurity = 0

#

# GM.TicketSystem.ChanceOfGMSurvey

# Description: Chance of sending a GM survey after ticket completion.

# Default: 50 - (Enabled)

# 0 - (Disabled)

GM.TicketSystem.ChanceOfGMSurvey = 50

#

###################################################################################################

###################################################################################################

# VISIBILITY AND DISTANCES

#

# Visibility.GroupMode

# Description: Group visibility modes. Defines which groups can aways detect invisible

# characters of the same raid, group or faction.

# Default: 1 - (Raid)

# 0 - (Party)

# 2 - (Faction)

Visibility.GroupMode = 1

#

# Visibility.Distance.Continents

# Visibility.Distance.Instances

# Visibility.Distance.BGArenas

# Description: Visibility distance to see other players or gameobjects.

# Visibility on continents on retail ~90 yards. In BG/Arenas ~533.

# For instances default ~170.

# Max limited by grid size: 533.33333

# Min limit is max aggro radius (45) * Rate.Creature.Aggro

# Default: 90 - (Visibility.Distance.Continents)

# 170 - (Visibility.Distance.Instances)

# 533 - (Visibility.Distance.BGArenas)

Visibility.Distance.Continents = 90

Visibility.Distance.Instances = 170

Visibility.Distance.BGArenas = 533

#

# Visibility.Notify.Period.OnContinents

# Visibility.Notify.Period.InInstances

# Visibility.Notify.Period.InBGArenas

# Description: Time (in milliseconds) for visibility update period. Lower values may have

# performance impact.

# Default: 1000 - (Visibility.Notify.Period.OnContinents)

# 1000 - (Visibility.Notify.Period.InInstances)

# 1000 - (Visibility.Notify.Period.InBGArenas)

Visibility.Notify.Period.OnContinents = 1000

Visibility.Notify.Period.InInstances = 1000

Visibility.Notify.Period.InBGArenas = 1000

#

###################################################################################################

###################################################################################################

# SERVER RATES

#

# Rate.Health

# Rate.Mana

# Rate.Rage.Income

# Rate.Rage.Loss

# Rate.RunicPower.Income

# Rate.RunicPower.Loss

# Rate.Focus

# Rate.Energy

# Rate.Loyalty

# Description: Multiplier to configure health, mana, incoming rage, loss of rage, focus

# energy and loyalty increase or decrease.

# Default: 1 - (Rate.Health)

# 1 - (Rate.Mana)

# 1 - (Rate.Rage.Income)

# 1 - (Rate.Rage.Loss)

# 1 - (Rate.RunicPower.Income)

# 1 - (Rate.RunicPower.Loss)

# 1 - (Rate.Focus)

# 1 - (Rate.Energy)

# 1 - (Rate.Loyalty)

Rate.Health = 1

Rate.Mana = 1

Rate.Rage.Income = 1

Rate.Rage.Loss = 1

Rate.RunicPower.Income = 1

Rate.RunicPower.Loss = 1

Rate.Focus = 1

Rate.Energy = 1

Rate.Loyalty = 1

#

# Rate.Skill.Discovery

# Description: Multiplier for skill discovery.

# Default: 1

Rate.Skill.Discovery = 1

#

# Rate.Drop.Item.Poor

# Rate.Drop.Item.Normal

# Rate.Drop.Item.Uncommon

# Rate.Drop.Item.Rare

# Rate.Drop.Item.Epic

# Rate.Drop.Item.Legendary

# Rate.Drop.Item.Artifact

# Rate.Drop.Item.Referenced

# Rate.Drop.Money

# Description: Drop rates for money and items based on quality.

# Default: 1 - (Rate.Drop.Item.Poor)

# 1 - (Rate.Drop.Item.Normal)

# 1 - (Rate.Drop.Item.Uncommon)

# 1 - (Rate.Drop.Item.Rare)

# 1 - (Rate.Drop.Item.Epic)

# 1 - (Rate.Drop.Item.Legendary)

# 1 - (Rate.Drop.Item.Artifact)

# 1 - (Rate.Drop.Item.Referenced)

# 1 - (Rate.Drop.Money)

Rate.Drop.Item.Poor = 1

Rate.Drop.Item.Normal = 1

Rate.Drop.Item.Uncommon = 1

Rate.Drop.Item.Rare = 1

Rate.Drop.Item.Epic = 1

Rate.Drop.Item.Legendary = 1

Rate.Drop.Item.Artifact = 1

Rate.Drop.Item.Referenced = 1

Rate.Drop.Money = 1

#

# Rate.Drop.Item.ReferencedAmount

# Description: Multiplier for referenced loot amount.

# Default: 1

Rate.Drop.Item.ReferencedAmount = 1

#

# Rate.XP.Kill

# Rate.XP.Quest

# Rate.XP.Explore

# Description: Experience rates.

# Default: 1 - (Rate.XP.Kill)

# 1 - (Rate.XP.Quest)

# 1 - (Rate.XP.Explore)

Rate.XP.Kill = 1

Rate.XP.Quest = 1

Rate.XP.Explore = 1

#

# Rate.RepairCost

# Description: Repair cost rate.

# Default: 1

Rate.RepairCost = 1

#

# Rate.Rest.InGame

# Rate.Rest.Offline.InTavernOrCity

# Rate.Rest.Offline.InWilderness

# Description: Resting points grow rates.

# Default: 1 - (Rate.Rest.InGame)

# 1 - (Rate.Rest.Offline.InTavernOrCity)

# 1 - (Rate.Rest.Offline.InWilderness)

Rate.Rest.InGame = 1

Rate.Rest.Offline.InTavernOrCity = 1

Rate.Rest.Offline.InWilderness = 1

#

# Rate.Damage.Fall

# Description: Damage after fall rate.

# Default: 1

Rate.Damage.Fall = 1

#

# Rate.Auction.Time

# Rate.Auction.Deposit

# Rate.Auction.Cut

# Description: Auction rates (auction time, deposit get at auction start,

# auction cut from price at auction end)

# Default: 1 - (Rate.Auction.Time)

# 1 - (Rate.Auction.Deposit)

# 1 - (Rate.Auction.Cut)

Rate.Auction.Time = 1

Rate.Auction.Deposit = 1

Rate.Auction.Cut = 1

#

# Rate.Honor

# Description: Honor gain rate.

# Default: 1

Rate.Honor = 1

#

# Rate.Mining.Amount

# Description: Rate for minimum/maximum times a deposit can be used.

# Default: 1

Rate.Mining.Amount = 1

#

# Rate.Mining.Next

# Description: Mining rates.

# Default: Chance to to mine a deposit again.

Rate.Mining.Next = 1

#

# Rate.Talent

# Description: Talent point rate.

# Default: 1

Rate.Talent = 1

#

# Rate.Reputation.Gain

# Description: Reputation gain rate.

# Default: 1

Rate.Reputation.Gain = 1

#

# Rate.Reputation.LowLevel.Kill

# Description: Reputation gain from killing low level (grey) creatures.

# Default: 1

Rate.Reputation.LowLevel.Kill = 1

#

# Rate.Reputation.LowLevel.Quest

# Description: Reputation gain rate.

# Default: 1

Rate.Reputation.LowLevel.Quest = 1

#

# Rate.Reputation.RecruitAFriendBonus

# Description: Reputation bonus rate for recruit-a-friend.

# Default: 0.1

Rate.Reputation.RecruitAFriendBonus = 0.1

#

# Rate.MoveSpeed

# Description: Movement speed rate.

# Default: 1

Rate.MoveSpeed = 1

#

# Rate.InstanceResetTime

# Description: Multiplier for the rate between global raid/heroic instance resets

# (dbc value). Higher value increases the time between resets,

# lower value lowers the time, you need clean instance_reset in

# characters db in order to let new values work.

# Default: 1

Rate.InstanceResetTime = 1

#

# SkillGain.Crafting

# SkillGain.Defense

# SkillGain.Gathering

# SkillGain.Weapon

# Description: Crafting/defense/gathering/weapon skills gain rate.

# Default: 1 - (SkillGain.Crafting)

# 1 - (SkillGain.Defense)

# 1 - (SkillGain.Gathering)

# 1 - (SkillGain.Weapon)

SkillGain.Crafting = 1

SkillGain.Defense = 1

SkillGain.Gathering = 1

SkillGain.Weapon = 1

#

# SkillChance.Orange

# SkillChance.Yellow

# SkillChance.Green

# SkillChance.Grey

# Description: Chance to increase skill based on recipe color.

# Default: 100 - (SkillChance.Orange)

# 75 - (SkillChance.Yellow)

# 25 - (SkillChance.Green)

# 0 - (SkillChance.Grey)

SkillChance.Orange = 100

SkillChance.Yellow = 75

SkillChance.Green = 25

SkillChance.Grey = 0

#

# SkillChance.MiningSteps

# SkillChance.SkinningSteps

# Description: Skinning and Mining chance decreases with skill level.

# Default: 0 - (Disabled)

# 75 - (In 2 times each 75 skill points)

SkillChance.MiningSteps = 0

SkillChance.SkinningSteps = 0

#

# DurabilityLoss.InPvP

# Description: Durability loss on death during PvP.

# Default: 0 - (Disabled)

# 1 - (Enabled)

DurabilityLoss.InPvP = 0

#

# DurabilityLoss.OnDeath

# Description: Durability loss percentage on death.

# Default: 10

DurabilityLoss.OnDeath = 10

#

# DurabilityLossChance.Damage

# Description: Chance to lose durability on one equipped item from damage.

# Default: 0.5 - (100/0.5 = 200, Each 200 damage one equipped item will use durability)

DurabilityLossChance.Damage = 0.5

#

# DurabilityLossChance.Absorb

# Description: Chance to lose durability on one equipped armor item when absorbing damage.

# Default: 0.5 - (100/0.5 = 200, Each 200 absorbed damage one equipped item will lose

# durability)

DurabilityLossChance.Absorb = 0.5

#

# DurabilityLossChance.Parry

# Description: Chance to lose durability on main weapon when parrying attacks.

# Default: 0.05 - (100/0.05 = 2000, Each 2000 parried damage the main weapon will lose

# durability)

DurabilityLossChance.Parry = 0.05

#

# DurabilityLossChance.Block

# Description: Chance to lose durability on shield when blocking attacks.

# Default: 0.05 - (100/0.05 = 2000, Each 2000 blocked damage the shield will lose

# durability)

DurabilityLossChance.Block = 0.05

#

# Death.SicknessLevel

# Description: Starting level for resurrection sickness.

# Example: 11 - (Level 1-10 characters will not be affected,

# Level 11-19 characters will be affected for 1 minute,

# Level 20-MaxPlayerLevel characters will be affected for 10 minutes)

# Default: 11 - (Enabled, See Example)

# MaxPlayerLevel+1 - (Disabled)

# -10 - (Enabled, Level 1+ characters have 10 minute duration)

Death.SicknessLevel = 11

#

# Death.CorpseReclaimDelay.PvP

# Death.CorpseReclaimDelay.PvE

# Description: Increase corpse reclaim delay at PvP/PvE deaths.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Death.CorpseReclaimDelay.PvP = 1

Death.CorpseReclaimDelay.PvE = 0

#

# Death.Bones.World

# Death.Bones.BattlegroundOrArena

# Description: Create bones instead of corpses at resurrection in normal zones, instances,

# battleground or arenas.

# Default: 1 - (Enabled, Death.Bones.World)

# 1 - (Enabled, Death.Bones.BattlegroundOrArena)

# 0 - (Disabled)

Death.Bones.World = 1

Death.Bones.BattlegroundOrArena = 1

#

# Die.Command.Mode

# Description: Do not trigger things like loot from .die command.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Die.Command.Mode = 1

#

###################################################################################################

###################################################################################################

# AUTO BROADCAST

#

# AutoBroadcast.On

# Description: Enable auto broadcast.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AutoBroadcast.On = 0

#

# AutoBroadcast.Center

# Description: Auto broadcasting display method.

# Default: 0 - (Announce)

# 1 - (Notify)

# 2 - (Both)

AutoBroadcast.Center = 0

#

# AutoBroadcast.Timer

# Description: Timer (in milliseconds) for auto broadcasts.

# Default: 60000 - (60 seconds)

AutoBroadcast.Timer = 60000

#

###################################################################################################

###################################################################################################

# BATTLEGROUND CONFIG

#

# Battleground.CastDeserter

# Description: Cast Deserter spell at players who leave battlegrounds in progress.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Battleground.CastDeserter = 1

#

# Battleground.QueueAnnouncer.Enable

# Description: Announce battleground queue status to chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Battleground.QueueAnnouncer.Enable = 0

#

# Battleground.QueueAnnouncer.PlayerOnly

# Description: Battleground queue announcement type.

# Default: 0 - (System message, Anyone can see it)

# 1 - (Private, Only queued players can see it)

Battleground.QueueAnnouncer.PlayerOnly = 0

#

# Battleground.InvitationType

# Description: Set Battleground invitation type.

# Default: 0 - (Normal, Invite as much players to battlegrounds as queued,

# Don't bother with balance)

# 1 - (Experimental, Don't allow to invite much more players

# of one faction)

Battleground.InvitationType = 0

#

# Battleground.PrematureFinishTimer

# Description: Time (in milliseconds) before battleground will end prematurely if there are

# not enough players on one team. (Values defined in battleground template)

# Default: 300000 - (Enabled, 5 minutes)

# 0 - (Disabled, Not recommended)

BattleGround.PrematureFinishTimer = 300000

#

# BattleGround.PremadeGroupWaitForMatch

# Description: Time (in milliseconds) a pre-made group has to wait for matching group of the

# other faction.

# Default: 1800000 - (Enabled, 30 minutes)

# 0 - (Disabled, Not recommended)

BattleGround.PremadeGroupWaitForMatch = 1800000

#

# Battleground.GiveXPForKills

# Description: Give experience for honorable kills in battlegrounds.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Battleground.GiveXPForKills = 0

#

# Battleground.Random.ResetHour

# Description: Hour of the day when the global instance resets occur.

# Range: 0-23

# Default: 6 - (06:00 AM)

Battleground.Random.ResetHour = 6

#

###################################################################################################

###################################################################################################

# BATTLEFIELD CONFIG

#

# Wintergrasp.Enable

# Description: Enable the Wintergrasp battlefield.

# Default: 0 - (Disabled)

# 1 - (Enabled, Experimental as of still being in development)

Wintergrasp.Enable = 0

#

# Wintergrasp.PlayerMax

# Description: Maximum number of players allowed in Wintergrasp.

# Default: 100

Wintergrasp.PlayerMax = 100

#

# Wintergrasp.PlayerMin

# Description: Minimum number of players required for Wintergrasp.

# Default: 0

Wintergrasp.PlayerMin = 0

#

# Wintergrasp.PlayerMinLvl

# Description: Required character level for the Wintergrasp battle.

# Default: 77

Wintergrasp.PlayerMinLvl = 77

#

# Wintergrasp.BattleTimer

# Description: Time (in minutes) for the Wintergrasp battle to last.

# Default: 30

Wintergrasp.BattleTimer = 30

#

# Wintergrasp.NoBattleTimer

# Description: Time (in minutes) between Wintergrasp battles.

# Default: 150

Wintergrasp.NoBattleTimer = 150

#

# Wintergrasp.CrashRestartTimer

# Description: Time (in minutes) to delay the restart of Wintergrasp if the world server

# crashed during a running battle.

# Default: 10

Wintergrasp.CrashRestartTimer = 10

#

###################################################################################################

###################################################################################################

# ARENA CONFIG

#

# Arena.MaxRatingDifference

# Description: Maximum rating difference between two teams in rated matches.

# Default: 150 - (Enabled)

# 0 - (Disabled)

Arena.MaxRatingDifference = 150

#

# Arena.RatingDiscardTimer

# Description: Time (in milliseconds) after which rating differences are ignored when

# setting up matches.

# Default: 600000 - (Enabled, 10 minutes)

# 0 - (Disabled)

Arena.RatingDiscardTimer = 600000

#

# Arena.RatedUpdateTimer

# Description: Time (in milliseconds) between checks for matchups in rated arena

# Default: 5000 - (5 seconds)

Arena.RatedUpdateTimer = 5000

#

# Arena.AutoDistributePoints

# Description: Automatically distribute arena points.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Arena.AutoDistributePoints = 0

#

# Arena.AutoDistributeInterval

# Description: Time (in days) how often arena points should be distributed if automatic

# distribution is enabled.

# Default: 7 - (Weekly)

Arena.AutoDistributeInterval = 7

#

# Arena.QueueAnnouncer.Enable

# Description: Announce arena queue status to chat.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Arena.QueueAnnouncer.Enable = 0

#

# Arena.ArenaSeason.ID

# Description: Current arena season id shown in clients.

# Default: 8

Arena.ArenaSeason.ID = 8

#

# Arena.ArenaSeason.InProgress

# Description: State of current arena season.

# Default: 1 - (Active)

# 0 - (Finished)

Arena.ArenaSeason.InProgress = 1

#

# Arena.ArenaStartRating

# Description: Start rating for new arena teams.

# Default: 0

Arena.ArenaStartRating = 0

#

# Arena.ArenaStartPersonalRating

# Description: Start personal rating when joining a team.

# Default: 0

Arena.ArenaStartPersonalRating = 0

#

# Arena.ArenaStartMatchmakerRating

# Description: Start matchmaker rating for players.

# Default: 1500

Arena.ArenaStartMatchmakerRating = 1500

#

# ArenaLog.ExtendedInfo

# Description: Include extended info to ArenaLogFile for each player after rated arena

# matches (guid, name, team, IP, healing/damage done, killing blows).

# Default: 0 - (Disabled)

# 1 - (Enabled)

ArenaLog.ExtendedInfo = 0

#

###################################################################################################

###################################################################################################

# NETWORK CONFIG

#

# Network.Threads

# Description: Number of threads for network.

# Default: 1 - (Recommended 1 thread per 1000 connections)

Network.Threads = 1

#

# Network.OutKBuff

# Description: Amount of memory (in bytes) used for the output kernel buffer (see SO_SNDBUF

# socket option, TCP manual).

# Default: -1 - (Use system default setting)

Network.OutKBuff = -1

#

# Network.OutUBuff

# Description: Amount of memory (in bytes) reserved in the user space per connection for

# output buffering.

# Default: 65536

Network.OutUBuff = 65536

#

# Network.TcpNoDelay:

# Description: TCP Nagle algorithm setting.

# Default: 0 - (Enabled, Less traffic, More latency)

# 1 - (Disabled, More traffic, Less latency, TCP_NO_DELAY)

Network.TcpNodelay = 1

#

###################################################################################################

###################################################################################################

# CONSOLE AND REMOTE ACCESS

#

# Console.Enable

# Description: Enable console.

# Default: 1 - (Enabled)

# 0 - (Disabled)

Console.Enable = 1

#

# Ra.Enable

# Description: Enable remote console (telnet).

# Default: 0 - (Disabled)

# 1 - (Enabled)

Ra.Enable = 0

#

# Ra.IP

# Description: Bind remote access to IP/hostname.

# Default: "0.0.0.0" - (Bind to all IPs on the system)

Ra.IP = "0.0.0.0"

#

# Ra.Port

# Description: TCP port to reach the remote console.

# Default: 3443

Ra.Port = 3443

#

# Ra.MinLevel

# Description: Required security level to use the remote console.

# Default: 3

Ra.MinLevel = 3

#

# SOAP.Enable

# Description: Enable soap service

# Default: 0 - (Disabled)

# 1 - (Enabled)

SOAP.Enabled = 0

#

# SOAP.IP

# Description: Bind SOAP service to IP/hostname

# Default: "127.0.0.1" - (Bind to localhost)

SOAP.IP = "127.0.0.1"

#

# SOAP.Port

# Description: TCP port to reach the SOAP service.

# Default: 7878

SOAP.Port = 7878

#

###################################################################################################

###################################################################################################

# CHARACTER DELETE OPTIONS

#

# CharDelete.Method

# Description: Character deletion behavior.

# Default: 0 - (Completely remove character from the database)

# 1 - (Unlink the character from account and free up the name, Appears as

# deleted ingame)

CharDelete.Method = 0

#

# CharDelete.MinLevel

# Description: Required level to use the unlinking method if enabled.

# Default: 0 - (Same method for every level)

# 1+ - (Only characters with the specified level will use the unlinking method)

CharDelete.MinLevel = 0

#

# CharDelete.KeepDays

# Description: Time (in days) before unlinked characters will be removed from the database.

# Default: 30 - (Enabled)

# 0 - (Disabled, Don't delete any characters)

CharDelete.KeepDays = 30

#

###################################################################################################

###################################################################################################

# CUSTOM SERVER OPTIONS

#

# PlayerStart.AllReputation

# Description: Players will start with most of the high level reputations that are needed

# for items, mounts etc.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.AllReputation = 1

#

# PlayerStart.AllSpells

# Description: If enabled, players will start with all their class spells (not talents).

# You must populate playercreateinfo_spell_custom table with the spells you

# want, or this will not work! The table has data for all classes / races up

# to TBC expansion.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.AllSpells = 0

#

# PlayerStart.MapsExplored

# Description: Characters start with all maps explored.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PlayerStart.MapsExplored = 1

#

# HonorPointsAfterDuel

# Description: Amount of honor points the duel winner will get after a duel.

# Default: 0 - (Disabled)

# 1+ - (Enabled)

HonorPointsAfterDuel = 0

#

# AlwaysMaxWeaponSkill

# Description: Players will automatically gain max weapon/defense skill when logging in,

# or leveling.

# Default: 0 - (Disabled)

# 1 - (Enabled)

AlwaysMaxWeaponSkill = 1

#

# PvPToken.Enable

# Description: Character will receive a token after defeating another character that yields

# honor.

# Default: 0 - (Disabled)

# 1 - (Enabled)

PvPToken.Enable = 1

#

# PvPToken.MapAllowType

# Description: Define where characters can receive tokens.

# Default: 4 - (All maps)

# 3 - (Battlegrounds)

# 2 - (FFA areas only like Gurubashi arena)

# 1 - (Battlegrounds and FFA areas)

PvPToken.MapAllowType = 4

#

# PvPToken.ItemID

# Description: Item characters will receive after defeating another character if PvP Token

# system is enabled.

# Default: 29434 - (Badge of justice)

PvPToken.ItemID = 29434

#

# PvPToken.ItemCount

# Description: Number of tokens a character will receive.

# Default: 1

PvPToken.ItemCount = 1

#

# NoResetTalentsCost

# Description: Resetting talents doesn't cost anything.

# Default: 0 - (Disabled)

# 1 - (Enabled)

NoResetTalentsCost = 0

#

# Guild.AllowMultipleGuildMaster

# Description: Allow more than one guild master. Additional Guild Masters must be set using

# the ".guild rank" command.

# Default: 0 - (Disabled)

# 1 - (Enabled)

Guild.AllowMultipleGuildMaster = 0

#

# ShowKickInWorld

# Description: Determines whether a message is broadcasted to the entire server when a

# player gets kicked

# Default: 0 - (Disabled)

# 1 - (Enabled)

ShowKickInWorld = 1

#

# RecordUpdateTimeDiffInterval

# Description: Time (in milliseconds) update time diff is written to the log file.

# Update diff can be used as a performance indicator. Diff < 300: good

# performance. Diff > 600 bad performance, may be caused by high CPU usage.

# Default: 60000 - (Enabled, 1 minute)

# 0 - (Disabled)

RecordUpdateTimeDiffInterval = 60000

#

# MinRecordUpdateTimeDiff

# Description: Only record update time diff which is greater than this value.

# Default: 100

MinRecordUpdateTimeDiff = 100

#

# PlayerStart.String

# Description: String to be displayed at first login of newly created characters.

# Default: "" - (Disabled)

PlayerStart.String = ""

#

# LevelReq.Trade

# Description: Level requirement for characters to be able to trade.

# Default: 1

LevelReq.Trade = 1

#

# LevelReq.Ticket

# Description: Level requirement for characters to be able to write tickets.

# Default: 1

LevelReq.Ticket = 1

#

# LevelReq.Auction

# Description: Level requirement for characters to be able to use the auction house.

# Default: 1

LevelReq.Auction = 1

#

# LevelReq.Mail

# Description: Level requirement for characters to be able to send and receive mails.

# Default: 1

LevelReq.Mail = 1

#

# PlayerDump.DisallowPaths

# Description: Disallow using paths in PlayerDump output files

# Default: 1

PlayerDump.DisallowPaths = 1

#

# PlayerDump.DisallowOverwrite

# Description: Disallow overwriting existing files with PlayerDump

# Default: 1

PlayerDump.DisallowOverwrite = 1

#

###################################################################################################

###################################################################################################

#

# Logging system options.

#

# Appender config values: Given a appender "name"

# Appender.name

# Description: Defines 'where to log'

# Format: Type,LogLevel,Flags,optional1,optional2

#

# Type

# 0 - (None)

# 1 - (Console)

# 2 - (File)

# 3 - (DB)

#

# LogLevel

# 0 - (Disabled)

# 1 - (Trace)

# 2 - (Debug)

# 3 - (Info)

# 4 - (Warn)

# 5 - (Error)

# 6 - (Fatal)

#

# Flags:

# 0 - None

# 1 - Prefix Timestamp to the text

# 2 - Prefix Log Level to the text

# 4 - Prefix Log Filter type to the text

# 8 - Append timestamp to the log file name. Format: YYYY-MM-DD_HH-MM-SS (Only used with Type = 2)

# 16 - Make a backup of existing file before overwrite (Only used with Mode = w)

#

# Colors (read as optional1 if Type = Console)

# Format: "fatal error warn info debug trace"

# 0 - BLACK

# 1 - RED

# 2 - GREEN

# 3 - BROWN

# 4 - BLUE

# 5 - MAGENTA

# 6 - CYAN

# 7 - GREY

# 8 - YELLOW

# 9 - LRED

# 10 - LGREEN

# 11 - LBLUE

# 12 - LMAGENTA

# 13 - LCYAN

# 14 - WHITE

# Example: "13 11 9 5 3 1"

#

# File: Name of the file (read as optional1 if Type = File)

# Allows to use one "%s" to create dynamic files

#

# Mode: Mode to open the file (read as optional2 if Type = File)

# a - (Append)

# w - (Overwrite)

#

Appender.Console=1,3,0

Appender.Server=2,2,0,Server.log,w

Appender.GM=2,2,0,GM.log

Appender.DBErrors=2,2,0,DBErrors.log

Appender.Char=2,2,0,Char.log,w

Appender.RA=2,2,0,RA.log

Appender.Warden=2,4,0,Warden.log

Appender.Chat=2,2,0,Chat.log

Appender.CharDump=2,2,0,%s.log

Appender.Arenas=2,2,0,Arena.log

Appender.SQLDev=2,2,0,SQLDev.log

Appender.SQLDriver=2,2,0,SQLDriver.log

# Appenders

# Description: List of Appenders to read from config

# (Using spaces as separator).

# Default: "Console Server GM DBErrors Char RA Warden Chat"

Appenders=Console Server GM DBErrors Char RA Warden Chat

# Logger config values: Given a logger "name"

# Logger.name

# Description: Defines 'What to log'

# Format: Type,LogLevel,AppenderList

# Type

# 0 - Default. Each type that has no config will

# rely on this one. Core will create this logger

# (disabled) if it's not configured

# 1 - Units that doesn't fit in other categories

# 2 - Pets

# 3 - Vehicles

# 4 - C++ AI, instance scripts, etc.

# 5 - DB AI, such as SAI, EAI, CreatureAI

# 6 - DB map scripts

# 7 - Network input/output,

# such as packet handlers and netcode logs

# 8 - Spellsystem and aurasystem

# 9 - Achievement system

# 10 - Condition system

# 11 - Pool system

# 12 - Auction house

# 13 - Arena's and battlegrounds

# 14 - Outdoor PVP

# 15 - Chat system

# 16 - LFG system

# 17 - Maps, instances (not scripts),

# grids, cells, visibility, etc.

# 18 - Player that doesn't fit in other categories.

# 19 - Player loading from DB

# (Player::_LoadXXX functions)

# 20 - Items

# 21 - Player skills (do not confuse with spells)

# 22 - Player chat logs

# 23 - loot

# 24 - guilds

# 25 - transports

# 26 - SQL. DB errors

# 27 - GM Commands

# 28 - Remote Access Commands

# 29 - Warden

# 30 - Authserver

# 31 - Worldserver

# 32 - Game Events

# 33 - Calendar

# 34 - Character (Exclusive to log login, logout, create, rename)

# 35 - Arenas

# 36 - SQL Driver

# 37 - SQL Dev

# 38 - Player Dump

# 39 - Battlefield

# 40 - Server Loading

# 41 - Opcodes (just id and name sent / received)

# LogLevel

# 0 - (Disabled)

# 1 - (Trace)

# 2 - (Debug)

# 3 - (Info)

# 4 - (Warn)

# 5 - (Error)

# 6 - (Fatal)

#

# AppenderList: List of appenders linked to logger

# (Using spaces as separator).

#

Logger.Root=0,5,Console Server

Logger.Chat=22,3,Chat

Logger.DBErrors=26,5,Console Server DBErrors

Logger.GM=27,3,Console Server GM

Logger.RA=28,3,RA

Logger.Warden=29,4,Warden

Logger.WorldServer=31,3,Console Server

Logger.Character=34,3,Char

Logger.Arenas=35,3,Arenas

Logger.SQLDriver=36,5,SQLDriver

Logger.SQLDev=37,3,SQLDev

Logger.CharDump=38,3,CharDump

Logger.Load=40,3,Console Server

Logger.Opcodes=41,6,Console Server

#

# Loggers

# Description: List of Loggers to read from config

# (Using spaces as separator).

# Default: "Root Chat DBErrors GM RA Warden Character Load"

Loggers=Root Chat DBErrors GM RA Warden Character Load WorldServer Opcodes

0

Share this post


Link to post
Share on other sites

Be careful posting your password, even though it is resolving the localhost, and put those in spoiler tags.

0

Share this post


Link to post
Share on other sites

Be careful posting your password, even though it is resolving the localhost, and put those in spoiler tags.

Extremly sorry about not having spoiler tags on them, but i have no clue how to add that on here.

0

Share this post


Link to post
Share on other sites

Extremly sorry about not having spoiler tags on them, but i have no clue how to add that on here.

Instead of [ code ] bla bla bla [ /code ]

Use [ spoiler ] bla bla bla [ /spoiler ]

1

Share this post


Link to post
Share on other sites

This isn't a realm ID issue or the player wouldn't even be able to connect at all.

Is your friend using a hacked version of the client? Did they modify any of their MPQ files? If this happens only when a loading screen appears, it seems to me that something is broken on the client side.

I remember when I was mucking around with trying to change the Draeni models into Night Elf models by editing the DBC files, I caused similar "malformed packet" issues when trying to /sit or /dance which not only disconnected me but crashed my client too.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.