Jump to content
TrinityCore

"unknown column" "missing table" "duplicate column" error / sql problems / SQLDriverLogFile < answer on 1st post of 1st page


Apple
 Share

Recommended Posts

Thanks a lot for the help guys. really appreciate it. haha Winblows will be the end of me i swear

ok it seems to have installed properly this time. baby steps. thanks again for the help

no prob, if you still have mysql connection issues. (I did awhile back on my old XP machine) you can go into my.ini file, and add a 'bind-address 0.0.0.0' , restart mysql, and it clears right up.

mysql and windows can get buggy sometimes.

Link to comment
Share on other sites

The OP doesn't have mysql connecting properly, or even loaded.

Its unable to load the pool, clear indicator that mysql is missing from the agenda.

Your error loads mysql, however just not reading the columns correctly. ;)

Link to comment
Share on other sites

I have MySQL running it is visible in services tab in task manager, there are: MSSQL$SQLEXPRESS(running),MSSQLServerADHelper100(stoped),MySQL55(running).

This only happens with worldserver, auth server starts with no problems.

P.S, I have enable SQLDriverLogFile, and now I get the same error as Thatguy I think:

2012-05-13 09:41:31 Opening DatabasePool 'world'. Asynchronous connections: 1, synchronous connections: 1.

2012-05-13 09:41:31 MySQL client library: 5.5.9

2012-05-13 09:41:31 MySQL server ver: 5.5.24

2012-05-13 09:41:31 [WARNING] MySQL client/server version mismatch; may conflict with behaviour of prepared statements.

2012-05-13 09:41:31 MySQL client library: 5.5.9

2012-05-13 09:41:31 MySQL server ver: 5.5.24

2012-05-13 09:41:31 [WARNING] MySQL client/server version mismatch; may conflict with behaviour of prepared statements.

2012-05-13 09:41:31 [ERROR]: In mysql_stmt_prepare() id: 56, sql: "SELECT difficulty_entry_1, difficulty_entry_2, difficulty_entry_3, KillCredit1, KillCredit2, modelid1, modelid2, modelid3, modelid4, name, subname, IconName, gossip_menu_id, minlevel, maxlevel, exp, faction_A, faction_H, npcflag, speed_walk, speed_run, scale, rank, mindmg, maxdmg, dmgschool, attackpower, dmg_multiplier, baseattacktime, rangeattacktime, unit_class, unit_flags, dynamicflags, family, trainer_type, trainer_spell, trainer_class, trainer_race, minrangedmg, maxrangedmg, rangedattackpower, type, type_flags, lootid, pickpocketloot, skinloot, resistance1, resistance2, resistance3, resistance4, resistance5, resistance6, spell1, spell2, spell3, spell4, spell5, spell6, spell7, spell8, PetSpellDataId, VehicleId, mingold, maxgold, AIName, MovementType, InhabitType, HoverHeight, Health_mod, Mana_mod, Armor_mod, RacialLeader, questItem1, questItem2, questItem3, questItem4, questItem5, questItem6, movementId, RegenHealth, equipment_id, mechanic_immune_mask, flags_extra, ScriptName FROM creature_template WHERE entry = ?"

2012-05-13 09:41:31 [ERROR]: Unknown column 'HoverHeight' in 'field list'

2012-05-13 09:41:31 [ERROR]: In mysql_stmt_prepare() id: 58, sql: "SELECT c.country FROM ip2nationCountries c, ip2nation i WHERE i.ip < ? AND c.code = i.country ORDER BY i.ip DESC LIMIT 0,1"

2012-05-13 09:41:31 [ERROR]: Table 'world.ip2nationcountries' doesn't exist

EDIT: I have imported the updates and it gives me an diffrent error now, something about vmaps, so I am extracting them, and hopefully will work.

Thanks for the help guys!

Best regards

Edited by dravce15a
Link to comment
Share on other sites

You forgot to run the updates, the big SQL file on the .zip file is not enough. you have to import all the updates to the world server, they can be found here : ...sqlupdatesworld

Instead of importing one by one which is really boring you can merge all into one file. Open ...sqlupdatesworld and then SHIFT+Right click -> Open command line here and then type on the command line: copy *.sql allupdates.sql And all you have to do is run the allupdates.sql

Link to comment
Share on other sites

cool. thanks. i can connect to the database fine now. i got a different problem now though. when i import my databases from into the SQL database the auth and characters database is empty. tried refreshing. it doesnt even give me the Run file(s) directly option. importing the world database using the TDB full file works fine it seems. i followed the guide and used C:Trinitysqlbaseauth_database.sql and C:Trinitysqlbasecharacter_database.sql. but even after refreshing it seems both db's are empty and as a result when i run the authserver.exe and worldserver.exe they close a second after they open.

also one more thing in the guide it says scroll down to LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth". when changing all these to match mysql databse login info i change the "trinity" "trinity" to what ever my sql root and password was correct? just want to make sure. sorry for asking stupid questions again

Bross

Link to comment
Share on other sites

Hey guy i got a problem i wonder if someone can perhaps assist me? i will really appreciate it.

im using Win7 .64

HeidieSQL win32

mysql server win32 x86

the guide im using is http://www.trinitycore.info/How-to:Win to set up my server

when i import my databases intothe auth and characters database's they are still empty (attached pic). tried refreshing. it doesnt even give me the Run file(s) directly option. importing the world database using the TDB_full_335.11.46_2012_02_13.sql file it works fine it seems. i followed the guide and used C:\Trinity\sql\base\auth_database.sql and C:\Trinity\sql\base\character_database.sql. but even after refreshing it seems both db's are empty and as a result when i run the authserver.exe and worldserver.exe they close a second after they open.

also one more thing in the guide when setting up your server and opening the config files it says scroll down to LoginDatabaseInfo = "127.0.0.1;3306;trinity;trinity;auth". when changing all these to match mysql database login info i change the "trinity" "trinity" to what ever my sql root and password was correct? just want to make sure. sorry for asking stupid questions again

Regards

Bross

post-14470-0-26418400-1336953293_thumb.j

Link to comment
Share on other sites

yes, change the conf files to your database settings. You can also create another username (if you are using root) and give less permissions, through the gui that you are using. Don't worry about changing root unless you are doing this locally and not planning to have people connect to your server.

Auth and Characters databases should be in TDB_Full* sql file. I just opened mine up and they were in there.

There is a '/base' directory where you will find auth_database.sql and characters_database.sql.

Auth as 9 tables and characters should have 78. If you are unsure that the tables are importing correctly there should be a 'drop_mysql.sql' you can run that to start over.

Link to comment
Share on other sites

it flashes on and then goes off

I looked at the log, and there are 2 errors

2012-05-18 15:06:35 ERROR: DatabasePool world NOT opened. There were errors opening the MySQL connections. Check your SQLDriverLogFile for specific errors.

2012-05-18 15:06:35 ERROR: Cannot connect to world database 127.0.0.1;3306;root;*********;world

I replaced the password with "*" for personal security, but I know that it is correct in the conf files. Any help is appriciated.

Link to comment
Share on other sites


2012-05-18 17:12:22 Opening DatabasePool 'world'. Asynchronous connections: 1, synchronous connections: 1.

2012-05-18 17:12:22 MySQL client library: 5.5.24

2012-05-18 17:12:22 MySQL server ver: 5.5.24

2012-05-18 17:12:22 MySQL client library: 5.5.24

2012-05-18 17:12:22 MySQL server ver: 5.5.24

2012-05-18 17:12:22 [ERROR]: In mysql_stmt_prepare() id: 56, sql: "SELECT difficulty_entry_1, difficulty_entry_2, difficulty_entry_3, KillCredit1, KillCredit2, modelid1, modelid2, modelid3, modelid4, name, subname, IconName, gossip_menu_id, minlevel, maxlevel, exp, faction_A, faction_H, npcflag, speed_walk, speed_run, scale, rank, mindmg, maxdmg, dmgschool, attackpower, dmg_multiplier, baseattacktime, rangeattacktime, unit_class, unit_flags, dynamicflags, family, trainer_type, trainer_spell, trainer_class, trainer_race, minrangedmg, maxrangedmg, rangedattackpower, type, type_flags, lootid, pickpocketloot, skinloot, resistance1, resistance2, resistance3, resistance4, resistance5, resistance6, spell1, spell2, spell3, spell4, spell5, spell6, spell7, spell8, PetSpellDataId, VehicleId, mingold, maxgold, AIName, MovementType, InhabitType, HoverHeight, Health_mod, Mana_mod, Armor_mod, RacialLeader, questItem1, questItem2, questItem3, questItem4, questItem5, questItem6, movementId, RegenHealth, equipment_id, mechanic_immune_mask, flags_extra, ScriptName FROM creature_template WHERE entry = ?"

2012-05-18 17:12:22 [ERROR]: Unknown column 'HoverHeight' in 'field list'

2012-05-18 17:12:22 [ERROR]: In mysql_stmt_prepare() id: 58, sql: "SELECT c.country FROM ip2nationCountries c, ip2nation i WHERE i.ip < ? AND c.code = i.country ORDER BY i.ip DESC LIMIT 0,1"

2012-05-18 17:12:22 [ERROR]: Table 'world.ip2nationcountries' doesn't exist

Link to comment
Share on other sites

You didn't apply SQL update files correctly (read the wiki?)

For the last time, this is what you need to do with the DBs:

Link to comment
Share on other sites

good lord, this would be easier if someone made a video. I will do it and come back if I cannot get it working after re-readong the wiki

Ok, a complete account of what I did....

1: open up sqlyog

2: log into the thing

3: click on the "auth" button found in the side box

4: clicked "database" drop box, then "import" then "execute script"

5: sleceted the "auth_database.sql" from c: rinitysqlbase

6: clicked execute button

7: clicked done

8: clicked "characters" button from the side box

9: repeat step 4

10: selected "characters_database.sql" from same place as in step 5

11: repeat steps 6 and 7

12: clicked "world" from the side box

13: repeat step 4

14: selected "TDB_full_335.11.46_2012_02_13.sql" from the folder on my desktop where it was extracted to from the dowload found at https://github.com/TrinityCore/TrinityCore/downloads

15: repeat steps 6 and 7

done...

still not working.

I have no real clue as to what OI am doing, so please correct em if I messed up in comprehending what I was told to do

Edited by rykuu
Link to comment
Share on other sites

Core rev. 69a4ac2209 (so the auth.log says. core was downloaded today @ 14:33)

TDB_full_335.11.47_2012_05_19

No custom scripts or SQLs included

I've got the same problem like there:

http://www.trinityco...ot-established/

Server.log


2012-05-22 22:29:16 ERROR: DatabasePool mainserver_trinity_world NOT opened. There were errors opening the MySQL connections. Check your SQLDriverLogFile for specific errors.

2012-05-22 22:29:16 ERROR: Cannot connect to world database localhost;3306;trinity;blablabla;trinity_world

SQLDriver.log

2012-05-22 22:29:16 [ERROR]: In mysql_stmt_prepare() id: 58, sql: "SELECT c.country FROM ip2nationCountries c, ip2nation i WHERE i.ip < ? AND c.code = i.country ORDER BY i.ip DESC LIMIT 0,1"

2012-05-22 22:29:16 [ERROR]: Table 'trinity_world.ip2nationCountries' doesn't exist

I've compiled the core today and created a new world-db with the full TDB and updates in the /sql/updates -folder (2012_05_19_03_world_version.sql __up to__ 2012_05_20_01_world_spell_bonus_data.sql).

I have no idea, what to do, cause i cannot miss any update. there are only six .sql's >.<

Link to comment
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By xgamerninjax
      Hello all, first time posting here and it's really got me scratching my head.
      I've compiled everything on my own computer, and then transferred everything to a host computer so the server can stay live. The server was running fine for a month or so and then suddenly it just crashes when it hits "Loading C++ scripts", exiting saying "caught signal 22"
      I tried setting up the host computer from scratch and transferred everything over fresh and it's still happening for some reason. (Note, I can run the server perfectly on my personal pc where I compiled it.)
      Any help would be greatly appreciated, thanks!
      3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].dmp 3d7e3a40e2b3+_worldserver.exe_[1-4_15-19-45].txt
    • By Rochet2
      A lot of people have asked how to debug so I made this short guide on how to set up debugging.
      This guide only tells you how to actually set up debugging in TrinityCore on Windows and Linux.
      This will not explain the basics of debugging. You can google those or play around with the debugger to learn.
      Here are a few videos that explain how to actually debug after setting debugging up on visual studio: https://youtu.be/0ebzPwixrJA and linux: https://www.youtube.com/watch?v=sCtY--xRUyI

      This guide contains multiple guides. Each list of bullet points is it's own guide.
      Make sure you can run the server normally before trying to debug.

      Windows:
      On Windows before anything you should check these
      - Before debugging or making crashlogs etc. with Visual Studio you must compile the core in "Debug" instead of "Release". You can select this in "Build>Configuration Manager" or at the top of Visual Studio window http://i.imgur.com/5oHd59j.png
      - You also need to move the new pdb files generate by compiling in debug mode on Visual Studio from the compile output folder (bin) to your server folder - these files contain information needed for debugging.
      - It is assumed that Solution Explorer is open. Open it by selecting "View>Solution Explorer" in Visual Studio http://i.imgur.com/hkW6Gk0.png
      -- You may want to click on the Home icon to reset the view on Solution Explorer http://i.imgur.com/N8UPwDh.png
      - You can place breakpoints in Visual Studio editor by right clicking a line of code and selecting "Breakpoint>Insert Breakpoint" http://i.imgur.com/L2TxBVG.png
      - At the top of the window you should see controls for stepping and continuing when you have started to debug.
      - Here is a video showing the basic Visual Studio functionality https://www.youtube.com/watch?v=Ijdk4z8-2OI
      Fastest way to debug on windows. This is the easiest way to start up debugging a script.
      - Start the authserver and worldserver normally
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In Visual Studio at the top select "Debug>Attach to process...>worldserver.exe" and click "Attach" http://i.imgur.com/jDEI2Hq.png
      - You are now debugging
       
      The second slower way of debugging on windows. This is useful for debugging something that occurs in the startup of the server.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Set as StartUp Project" http://i.imgur.com/wvMzeRA.png
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties you should go to "Configuration Properties>Debugging" and edit "Working Directory" to point to the server folder. For me this is the default compile folder so I use "$(OutDir)" http://i.imgur.com/aRI29fB.png
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging". The server will start with debugging attached from the beginning http://i.imgur.com/cg1KJNw.png
      - You are now debugging
      Crashlogs on windows. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - After compiling the core in "Debug" instead of "Release" start up the worldserver and authserver
      - Reproduce the crash you have
      - In the server folder there is now a folder called Crashes that contains txt and dmp files. http://i.imgur.com/9eQIdql.png
      - You can open the txt files in text editors http://i.imgur.com/EH6R17E.png
      -- At the top of a txt file there is some information about your system and below it there is the Call Stack and below that there are Variables of each part of the call stack
      -- The Call Stack will tell you at the top what was the last function call before crashing and what function calls led to that function call.
      -- Next to the function names there is the file that the function is defined in and the line number the code was executing in that function.
      -- In the Variables section you can inspect variables that were present at each function call.
      -- Based on this information you are often able to see what crashed or get a better view of what you need to inspect more in your code.
      - The dmp file can be opened in Visual Studio
      -- Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      -- Drag and drop the dmp file to Visual Studio
      -- In the window that opens click to "Debug with Native Only" http://i.imgur.com/OgyU2kM.png
      -- In the window popup click "Break" http://i.imgur.com/4jDzqRn.png
      -- You are now in a state like you would have hit a break point in the code or a crash while debugging. You can inspect the call stack and the variables.
      Edit and continue on windows. When debugging this allows you to change the code and without restarting the server apply those changes so they actually work ingame.
      - Open TrinityCore.sln in Visual Studio. This is what you usually open when you want to compile the core
      - In solution explorer right click on worldserver and select "Properties" http://i.imgur.com/rTNEF9O.png
      -- In Properties select "Configuration Properties>Linker>General" and set "Enable Incremental Linking" to "Yes". http://i.imgur.com/caQqwN5.png
      -- In Properties select "Configuration Properties>Linker>Advanced" and set "Image Has Safe Exception Handlers" to "No". http://i.imgur.com/FYzN8Ks.png
      -- In Properties select "Configuration Properties>C/C++>General" and set "Debug Information Format" to "Program Database for Edit And Continue". http://i.imgur.com/pxQ6I8N.png
      - At the top of the window select "Tools>Options". In the Options select "Debugging>General" and in there select "Enable Edit and Continue", "Enable Native Edit and Continue" and "Require source files to exactly match the original version".
      - Compile the server for the changes to take effect.
      - Set up "The second slower way of debugging" (I did not test edit and continue on other configurations)
      - Start the authserver normally
      - Start the worldserver by selecting "Debug>Start Debugging".
      - Try edit a cpp file a little and save it.
      - At top of Visual Studio window select "Debug>Apply Code Changes" and wait until the changes are applied. Warning: it can take considerable amount of time for the changes to be applied. http://i.imgur.com/77pb58E.png
      - If you have issues, be sure to check the error messages in Output. You can view it by selecting "View>Output" http://i.imgur.com/4cIznW9.png
      - This guide was written based on https://msdn.microsoft.com/en-us/library/esaeyddf.aspx and https://blogs.msdn.microsoft.com/vcblog/2015/07/22/c-edit-and-continue-in-visual-studio-2015/
      Linux:
      First we need to compile the server in debug mode.
      - Compile the server with the cmake flag -DCMAKE_BUILD_TYPE=Debug

      Debugging on linux. You can debug on linux by using GDB.
      - Here is a good video about it: https://www.youtube.com/watch?v=sCtY--xRUyI
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "gdb ./worldserver"
      -- Enter breakpoints by using break command on gdb
      -- Use the run command on gdb to start the server
      -- You are now debugging
      - You may also be interested in using VScode or some other more visual debuggers. https://www.youtube.com/watch?v=B0xTgyCwsAo
      Crashlogs on linux. Once you have a way to reproduce a crash you can get a crashlog that can help you resolve it.
      - Take crashreport.gdb from /contrib/debugger from source folder and place it to your server folder
      - Start the authserver
      - Start the worldserver by using "gdb -x crashreport.gdb ./worldserver"
      - Reproduce your crash
      - There should be a backtrace.log in your server folder that contains information about the crash like the callstack and variables in each function call in the call stack
      - This guide was written based on https://github.com/TrinityCore/TrinityCore/blob/master/contrib/debugger/README
      Running valgrind on linux. This helps you find memory errors like invalid reads and writes and memory leaks.
      - Here is a good video about it: https://www.youtube.com/watch?v=fvTsFjDuag8
      - Basically you
      -- Start the authserver
      -- Start the worldserver by using "valgrind ./worldserver"
      -- Run your code that you want to analyze and close the server
      -- The console or an output log should contain the valgrind log
    • By reyne
      Hey there!

      I've followed a few threads here about map extraction, and am still having issues. Originally, I was having the issue described here.
      After following the advice given in that thread (creating characters of both BC races and running around for a bit), I am no longer getting that error, however now I get the following error while trying to extract maps:

      `Error loading World\Maps\Expansion01\Expansion01_42_6.adt`

      This repeats for every line in Expansion01, and then the extractor crashes.

      I'm not sure where else to go from here.

      Thanks for your help

      Edit: I've created an 85 on an i85 server and flown all around Outland now, same issue.
    • By Uee
      I recently found the Trinity Cataclsym Preservation Project and thought I will try it out.
      I am already running 3.3.5a and Master - both server run great
      Pulled 4.3.4 down using Git and built it same way as others:
      boost_1_73_0 cmake 3.17.2 Mysql 5.7.30 VS Community 2019 Built fine - no issue. Used 'Extractor.bat' to run all the map extractors - worked great!
      Noticed there was extra file 'connection_patcher.exe`, ran that - worked great! Now have "wow_patched" and use this to launch client
      MySQL runs in standalone mode, -initialize, added base sql files, imported, auth and character sql files
      Configured both the .conf files and passwords, IPs etc are all in place.
      Note: When loading the exe and built conf file, bnetserver complain about these items missing, so I add them:
      Updates.AutoSetup = 1 Updates.EnableDatabases = 0 LoginDatabase.SynchThreads = 1 Load up Mysql - loads fine
      Load up bnetserver and appears to load ok - last few lines look like this:
      Connected to MySQL database at 127.0.0.1
      DatabasePool 'auth' opened successfully. 2 total connections running.
      Started auth database connection pool.
      Listening on connections from worldservers on port 1118...
      Load up worldserver and it adds the FULL world and hotfixes, then applied all updates (confirmed archived in SQL) - last few lines look like this:
      Calculate next monthly quest reset time...
      Calculate random battleground reset time...
      Calculate guild limitation(s) reset time...
      Calculate next currency reset time...
      World initialized in 0 minutes 13 seconds
      TrinityCore rev. d0c7bbab40bc 2020-05-06 00:01:21 +0200 (master branch) (Win64, RelWithDebInfo, Static) (worldserver-daemon) ready...
       
      There are no db errors in logs.
      Config.wtf contain portal, realmlist as remote server and patchlist as localhost.
      When I try to connecting using "user@local" and password I get immediately disconnected.
      What I did noticed different is that the bnetserver doesnt add "Added realm "Battle for Azeroth" at 192.168.10.213:8085." (From my Master log) 
      3.3.5a also have this line as last line in authserver - but 4.3.4 is not giving me this one.
      Realmlist table is accurate with right information.
      Anyone know why bnetserver is not starting me realm?
       
    • By Deer_Hunter
      Hello all,
      I just updated from the latest Git 
      Trinity Core REV. ac6baa547376 + 2020-02-21  3.3.5 Branch.
      I'm getting this error after crash.
      Problem signature:
        Problem Event Name:    APPCRASH
        Application Name:    worldserver.exe
        Application Version:    0.0.0.0
        Application Timestamp:    5e50a462
        Fault Module Name:    StackHash_f12f
        Fault Module Version:    6.3.9600.19629
        Fault Module Timestamp:    5e2fdc0d
        Exception Code:    c0000374
        Exception Offset:    PCH_9E_FROM_ntdll+0x0000000000090D0A
        OS Version:    6.3.9600.2.0.0.272.7
        Locale ID:    1033
        Additional Information 1:    f12f
        Additional Information 2:    f12f0934d3e965f73c68e60f20f2cd40
        Additional Information 3:    7595
        Additional Information 4:    7595e4d8d703db9dcd3d2f6ea540e357
      the exception code says its a Heap error,  I'm not sure how to troubleshoot this.
      Thanks
×
×
  • Create New...